On Thu, Dec 15, 2016 at 07:51:40PM +0100, Hrvoje Popovski wrote:
> On 15.12.2016. 12:30, Stuart Henderson wrote:
> > If you want to cut down on weight+noise at the expense of more cost
> > and a less powerful cpu, maybe APU2 in a 1U case or something like
> > supermicro SYS-5018A-FTN4.
>
> has anyone dmesg from SYS-5018A-FTN4 box? i'm interesting in intel qat
There is no support for Intel QAT (sometimes called Quick Assist) in
OpenBSD and that's not likely to change anytime soon. Some support is
supposedly coming to FreeBSD (by way of pfSense and some commerical
sponsorship or something) but I have not seen anything recently about
that.
Because Intel QAT is not supported, it is better to use one of the
Supermicro A1SAi boards (for the slight speed increase) rather than the
A1SRi-2758F that comes in the SYS-5018A-FTN4. The A1SRi boards do work
fine though.
I put together my own systems like this which only takes a few minutes
with Supermicro parts. I use the same case which is the Supermicro
CSE-505-203B, a few Noctua 40mm fans (which are much quieter and
probably not necessary), and then one of the A1SAi-2750F, A1SAi-2550F,
A1SRM-LN7F-2758F, A1SRM-LN7F-2358F, A1SRi-2758F, or A1SRi-2558F. I also
have a few A1SAM-2550F boards but those are not booting from USB sticks
for some reason. All of the others above work just fine. All that's left
is some sort of storage (like a 64GB SanDisk SSD, Supermicro SuperDom,
or USB stick with resflash) and memory (I use Kingston ECC SO-DIMMs) and
it works great. I have quite a few of these at tower sites, datacenter
installations, and as home and business routers. As a bonus, all of the
above can be powered directly from 12V if you want to wire them up that
way. I have started doing that at DC sites and to run from batteries.
Where portability is needed, the CSE-505-203B fits great in any of the
SKB short depth cases like hte SKB R4S or R6S.
Below is a dmesg for the A1SRi-2758F. This particular router is running
BGP, OSPF, and CARP on the inside as well as DNS and DHCP. It is running
5.8 so not the most recent (it is due to be upgraded in the next week)
but Intel QAT does show up as:
vendor "Intel", unknown product 0x1f18 (class processor subclass Co-processor,
rev 0x02) at pci0 dev 11 function 0 not configured
Bryan
OpenBSD 5.8-stable (GENERIC.MP) #9: Thu May 26 22:05:56 PDT 2016
r...@amd64.example.com:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17134739456 (16340MB)
avail mem = 16611545088 (15842MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x7f4ee000 (53 entries)
bios0: vendor American Megatrends Inc. version "1.1" date 01/09/2015
bios0: Supermicro A1SAi
acpi0 at bios0: rev 2
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP FPDT FIDT SPMI MCFG WDAT UEFI APIC BDAT HPET SSDT
acpi0: wakeup devices PEX1(S0) PEX2(S0) PEX3(S0) PEX4(S0) EHC1(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz, 2400.45 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz, 2399.99 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz, 2399.99 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz, 2399.99 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
cpu4 at mainbus0: apid 8 (application processor)
cpu4: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz, 2399.99 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu4: 1MB 64b/line 16-way L2 cache
cpu4: smt 0, core 4, package 0
cpu5 at mainbus0: apid 10 (application processor)
cpu5: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz, 2399.99 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu5: 1MB 64b/line 16-way L2 cache
cpu5: smt 0, core 5, package 0
cpu6 at mainbus0: apid 12 (application processor)
cpu6: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz, 2399.99 MHz
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu6: 1MB 64b/line 16-way L2 cache
cpu6: smt 0, core 6, package 0
cpu7 at mainbus0: apid 14 (application processor)
cpu7: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz, 2399.99 MHz
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu7: 1MB 64b/line 16-way L2 cache
cpu7: smt 0, core 7, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX1)
acpiprt2 at acpi0: bus 2 (BR04)
acpiprt3 at acpi0: bus 3 (PEX2)
acpiprt4 at acpi0: bus 4 (PEX3)
acpiprt5 at acpi0: bus -1 (PEX4)
acpicpu0 at acpi0: C2(350@41 mwait.3@0x51), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(350@41 mwait.3@0x51), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(350@41 mwait.3@0x51), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(350@41 mwait.3@0x51), C1(1000@1 mwait.1), PSS
acpicpu4 at acpi0: C2(350@41 mwait.3@0x51), C1(1000@1 mwait.1), PSS
acpicpu5 at acpi0: C2(350@41 mwait.3@0x51), C1(1000@1 mwait.1), PSS
acpicpu6 at acpi0: C2(350@41 mwait.3@0x51), C1(1000@1 mwait.1), PSS
acpicpu7 at acpi0: C2(350@41 mwait.3@0x51), C1(1000@1 mwait.1), PSS
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 2400 MHz: speeds: 2400, 2300, 2200, 2100, 2000, 1900,
1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Atom C2000 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel Atom C2000 PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x03
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "ASPEED Technology AST2000" rev 0x30
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb2 at pci0 dev 2 function 0 "Intel Atom C2000 PCIE" rev 0x02: msi
pci3 at ppb2 bus 3
xhci0 at pci3 dev 0 function 0 "Renesas uPD720201 xHCI" rev 0x03: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Renesas xHCI root hub" rev 3.00/1.00 addr 1
ppb3 at pci0 dev 3 function 0 "Intel Atom C2000 PCIE" rev 0x02: msi
pci4 at ppb3 bus 4
vendor "Intel", unknown product 0x1f18 (class processor subclass Co-processor,
rev 0x02) at pci0 dev 11 function 0 not configured
pchb1 at pci0 dev 14 function 0 "Intel Atom C2000 RAS" rev 0x02
"Intel Atom C2000 RCEC" rev 0x02 at pci0 dev 15 function 0 not configured
"Intel Atom C2000 SMBus" rev 0x02 at pci0 dev 19 function 0 not configured
em0 at pci0 dev 20 function 0 "Intel I354 SGMII" rev 0x03: msi, address
00:25:90:12:34:01
em1 at pci0 dev 20 function 1 "Intel I354 SGMII" rev 0x03: msi, address
00:25:90:12:34:02
em2 at pci0 dev 20 function 2 "Intel I354 SGMII" rev 0x03: msi, address
00:25:90:12:34:03
em3 at pci0 dev 20 function 3 "Intel I354 SGMII" rev 0x03: msi, address
00:25:90:12:34:04
ehci0 at pci0 dev 22 function 0 "Intel Atom C2000 USB" rev 0x02: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ahci0 at pci0 dev 23 function 0 "Intel Atom C2000 AHCI" rev 0x02: msi, AHCI 1.3
scsibus1 at ahci0: 32 targets
ahci1 at pci0 dev 24 function 0 "Intel Atom C2000 AHCI" rev 0x02: msi, AHCI 1.3
ahci1: port 0: 6.0Gb/s
ahci1: port 1: 6.0Gb/s
scsibus2 at ahci1: 32 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, SanDisk SDSSDP06, 3.1.> SCSI3 0/direct
fixed naa.5001b44a4979f1c3
sd0: 60103MB, 512 bytes/sector, 123091920 sectors, thin
sd1 at scsibus2 targ 1 lun 0: <ATA, SanDisk SDSSDP06, 3.1.> SCSI3 0/direct
fixed naa.5001b44a4979f630
sd1: 60103MB, 512 bytes/sector, 123091920 sectors, thin
pcib0 at pci0 dev 31 function 0 "Intel Atom C2000 PCU" rev 0x02
ichiic0 at pci0 dev 31 function 3 "Intel Atom C2000 PCU SMBus" rev 0x02: apic 2
int 18
iic0 at ichiic0
sdtemp0 at iic0 addr 0x18: stts2002
sdtemp1 at iic0 addr 0x19: stts2002
sdtemp2 at iic0 addr 0x1a: stts2002
iic0: addr 0x1b 00=00 01=00 02=00 03=00 04=00 05=c3 06=1b 07=0a 08=00 09=00
0a=00 0b=00 0c=00 0d=00 0e=00 0f=00 words 00=007f 01=0000 02=0000 03=0000
04=0000 05=c31a 06=1b09 07=0a01
iic0: addr 0x2e 00=3d words 00=3d3d 01=0000 02=0000 03=0000 04=0000 05=0000
06=0000 07=0000
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub2 at uhub1 port 1 "Intel product 0x07db" rev 2.00/0.02 addr 2
uhub3 at uhub2 port 3 "ATEN International product 0x7000" rev 2.00/0.00 addr 3
uhidev0 at uhub3 port 1 configuration 1 interface 0 "ATEN International product
0x2419" rev 1.10/1.00 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 1 configuration 1 interface 1 "ATEN International product
0x2419" rev 1.10/1.00 addr 4
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed
sd2: 32772MB, 512 bytes/sector, 67118978 sectors
root on sd2a (41c7decf4a0660d2.a) swap on sd2b dump on sd2b
