Where is this unit? Here in the States?
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
tahir hamid
Sent: Monday, February 28, 2011 12:53
To: Panasonic KX-T telephone system discussion list
Subject: Re: KX-T: KXTD1232
Thanks Brad for prompt
/28/11, brad wrote:
From: brad
Subject: Re: KX-T: KXTD1232
To: "'Panasonic KX-T telephone system discussion list'"
Date: Monday, February 28, 2011, 6:02 PM
I have one of those cards in service. I will check the crystal and see what
it is if I can easily. I would also look
I have one of those cards in service. I will check the crystal and see what
it is if I can easily. I would also look at the processor it is for and
check the specs on it and you may get a clue. Brad KB2CHY
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] O
At 02:12 PM 4/3/2009, Paul Tys wrote:
>Hi, some help please.
>
>I have a Panasonic KXTD 1232 with 12 Analogue Line.
>
>I am trying to do a parallel connection between a Pan KXTD 7431
>(Digital Phone) and a 2 wire ordinary Pot phone.
>
>The socket i have done for the Digital KXtd 7431 phone is L &
of this morning.
Marc
[EMAIL PROTECTED]
- Original Message -
From: "Larry" <[EMAIL PROTECTED]>
To:
Sent: Friday, October 03, 2008 6:43 PM
Subject: Re: KX-T: KXTD1232 Clock frozen
> Paul Norred wrote:
>> Lets see if anyone on the vast unpaid research departme
Paul Norred wrote:
> Lets see if anyone on the vast unpaid research department can help with this
> one?
> Older client in Houston with older KXTD1232-x, as the story goes her power
> was out for a while because the wicked warlock Ike blew all her power lines
> asunder. When the power was resto
]>
To: "'Paul Norred'" <[EMAIL PROTECTED]>;
Sent: Friday, October 03, 2008 3:35 PM
Subject: Re: KX-T: KXTD1232 Clock frozen
> Hello Sir Paul !
>
> Was the system on a Battery Back Up Unit ??
>
> If Not, the phone system may have gotten hit by a power s
Hello Sir Paul !
Was the system on a Battery Back Up Unit ??
If Not, the phone system may have gotten hit by a power surge and fried some
stuff.
I would have her turn off the power and unplug the unit for 2 minutes
Then Plug in the unit then click on the power switch and try it again
If this sti
ucek'" <[EMAIL PROTECTED]>; "'kxt help'"
Sent: Sunday, December 30, 2007 12:27 PM
Subject: Re: KX-T: KXTD1232 changing its clock by itself...
> Set CID to NO
>
> This way you will deactivate the CID Card
>
> Or remove the card
>
> Wolfgang
&
Set CID to NO
This way you will deactivate the CID Card
Or remove the card
Wolfgang
NTC
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
brucek
Sent: Sunday, December 30, 2007 12:20 PM
To: 'kxt help'
Subject: KX-T: KXTD1232 changing its clock by itself.
At 10:11 AM 8/3/2006, Carmen Tedeschi wrote:
>Anyone ever have a problem with not being able to do a "flash"? I get a
>call in on a single line phone. As soon as I try to flash, the CO light
>goes out and the call is dropped. Tried different extensions, ext.
>groups, TRG, COS. Any other thoughts.
Hi
You need to go into option programming and change a 0 to a 1
the PBX is defaulted to re-order a new dial tone upon getting a extension
flash. By making this change, it sends the flash to the phone company.
Go into 7. Additional functions
Sys 2
Option 5
Change to 1
Hope this helps
Wolfga
forgot-
easy to test! when the port fails, disconnect the vm and plug in a slt, go off
hook and see what it's doing.
stutter dial tone, error tone, etc says it got programmed to do something,
should have dial tone that you can make a
call from.
-larry
5/4/05 9:52:04 AM, larry <[EMAIL PROTEC
oopps, i'll try again with the right mail account...
make sure one of the users didn't program crap in their vm features, like maybe
pager notify on
msg waiting. if they set the phone number wrong (like forget the "9"), it
could change the port
to pickup dial, forward all calls, etc and the por
At 09:12 AM 5/4/2005, Harry wrote:
>Change the ksu and voicemail
>Get KX-TDA50 AND KX-TVS325
>AND YOU'LL HAVE the best
>Welcome to 2005!
>
>-Original Message-
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
>Carmen Tedeschi
>Sent: Wednesday, May 04, 2005 8:57 AM
>To: kxt@kxt
Change the ksu and voicemail
Get KX-TDA50 AND KX-TVS325
AND YOU'LL HAVE the best
Welcome to 2005!
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Carmen Tedeschi
Sent: Wednesday, May 04, 2005 8:57 AM
To: kxt@kxthelp.com
Subject: KX-T: KXTD1232-1 not transf
Dear Daniel.
Extension is LOCKED...
so go to the operator extension use prgoram99, "01" enter ext. no. and select UNLOCK.,
Problem solved...
Nitin
Daniel J Anderson <[EMAIL PROTECTED]> wrote:
KXTD1232 been in operation for years.
One user reports that they can no longer make outgoing call
In a message dated 3/1/02 10:24:48 AM Eastern Standard Time, [EMAIL PROTECTED]
writes:
> Greetings:
>
> I have created a UCD that ques to DISA, plays OGM (your call is important,
> and will be answered by the next available representative) and then
> terminates to the first available extens
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Thursday, January 24, 2002 4:24 PM
To: [EMAIL PROTECTED]
Subject: Fwd: KX-T: KXTD1232
In a message dated 1/24/02 3:51:59 AM Eastern Standard Time,
[EMAIL PROTECTED] writes:
> I ne
Press Program
Press *#
Enter your password
Enter 000 for Date & Time
Enter 001 for Speed Dial Numbers
Enter 002 for Speed Dial Numbers Names
Refer to your Programming Manual, It's in there.
If you don't have a manual we will sell you a copy
Bye for now!
Wolfgang Boernert
[EMAIL PROTECTED]
Ne
You might consider calling the dealer back and asking how much 1 hour of
training on the system would run, Or price out 2 or 3 dealers, I offer new
customers 1st visit training for $50.00, After 1 hour most office can do all
the changes needed in speed dial, programming buttons, changing names,
21 matches
Mail list logo
