Re: KX-T: Low Speech on TD1232

which field in 990.. pls advice,, i am also searchin Carl Navarro <[EMAIL PROTECTED]> wrote: At 04:56 AM 6/5/2006, N Deo wrote: >The Telephone Instruments are in combination > > PANASONIC KX-TS500 > PANASONIC KX-T2371 > > And the Work FINE if connected DIRECTLY to the TRUNK. Problem is

Re: KX-T: ta-624 centrex

I think the FLASH Button on the KX-T77xx does the function w/o any modification. for SLTs refer the following feature Answering Call Waiting from the Telephone Company Dustin Schuemann <[EMAIL PROTECTED]> wrote: I installed a ta-624 and the customer also has centrex. Some of the

Re: KX-T: Using Broadband in TDA

AM To: 'N D'; kxt@kxthelp.com Subject: Re: KX-T: Using Broadband in TDA There is a way, if it is analog to the rooms. There is a company that effectively provides this in hotels, essentially DSL (or ??) to each room. The San Marcus Hotel in Chandler, Az. has this arrangement. If you cal

KX-T: Using Broadband in TDA

Need help in how to connect a broadband Internet Connection to TDA System. to be distributed to extension users for a Hotel. And can it happen on existing extension wiring? Any Ideas? Thanks in advance. - Yahoo! Mail Bring photos

KX-T: TDA Series Account Codes

Hi Guys, Has anyone used the "ACCOUNT CODES" in TDA? Steps I have taken. 1. Enabled Verify code. 2. In TRS Table entered Ristricted & Denied Numbers' Leading Digits 3. In Class Of Service Account Codes Option is FORCED. Aftre doing this I have to enter 4 Digits

Re: KX-T: SMDR printout

Go to Menu 11 - Maintenance. Select 1. SMDR and then select "PRINT" in Front of the Menu (7th From Top) "Intercom Call print". Hope this helps.. Nitin Carl Navarro <[EMAIL PROTECTED]> wrote: At 12:34 AM 1/25/2006, Joey del Mundo wrote: >Hi, I have a kx-tda200 and I want it to print

Re: KX-T: Account Codes in TDA100/200 BX (India)

Already in forced... Jim Marks <[EMAIL PROTECTED]> wrote: You need to change the COS to be "forced" account codes instead of optional Jim Marks Denville Wiring Systems Panasonic Phones & Voicemail N.J. 973-627-7088 - Original Message - From: "N D" T

KX-T: Account Codes in TDA100/200 BX (India)

Can anyone tell me how to use the account codes in TDA. If we follow the procedure of TD1232 it is not working. ANY 4 Digit Combination works as account code. Also What I need to do to Print the Account codes in SMDR ? Tried Type A / B / C but codes dont get printed. Using Ver2.0 system.

Re: KX-T: TDA Series DECT

is 600 meters? >Carm > >-Original Message- >From: N D >To: kxt@kxthelp.com >Sent: Mon, 22 Aug 2005 22:38:37 -0700 (PDT) >Subject: KX-T: TDA Series DECT > > >Dear All, > >What is the maximum area of coverage (Radius in Meters) that a TDA Series Cell >Sta

KX-T: TDA Series DECT

Dear All, What is the maximum area of coverage (Radius in Meters) that a TDA Series Cell StationsKX-TDA0141CEKX-TDA0142CEcan cover. And what are the adavantages offered by TDA DECT over Kirk Solution. And does the Kirk Base Station ACTUALLY Cover 600 Meters of Radius it is claimed on t

Re: KX-T: ISDN Feature - PRI or BRI.............

India County Wide Comms <[EMAIL PROTECTED]> wrote:N D wrote: >Dear All, > >Has anyone ever used the following feature on KX-TDA100/200 with a PRI Line. >Nowhere the Line is Referred to as PRI/BRI... I am assuming its PRI.. Correct >me if I am wrong. >

KX-T: ISDN Feature - PRI or BRI.............

Dear All, Has anyone ever used the following feature on KX-TDA100/200 with a PRI Line. Nowhere the Line is Referred to as PRI/BRI... I am assuming its PRI.. Correct me if I am wrong. -

Re: KX-T: tarjeta

Yeah ENGLISH Pls... Jim Schultz <[EMAIL PROTECTED]> wrote: Thought this list was in English ? Jim - Original Message - From: "Comuniredes" To: Sent: Wednesday, August 03, 2005 11:31 PM Subject: KX-T: tarjeta Hola a todos Estoy buscando una tarjeta para una cen

Re: KX-T: Dual KX-TD1232-6 Dual PRI ?

Hi, No U cant have 2 Nos TD290s in the interconected TD1232s. Max. Number of channels supported by TD1232 are 38.. 30 for PRI & 8 on Basic system configuration. This rule also applies to E1/T1 card (TD288) And no pluggable VoIP module is available. Time to switch to TDA... may be? (Its conf

Re: KX-T: Point to Point T1

please elaborate on your connectivity diagram... [EMAIL PROTECTED] wrote:I've got a customer with a KX-TD 1232-4 that's installing a Point to Point T1 to another city, (for data) and wanted to be able to transfer some calls back & forth. Is there a way to do this other than OPX's. Thanks Kenn

Re: KX-T: Remote Access Call Forwarding

You can do it with DISA.. and protect it with passwords too... Ref. can be found in DISA Programming... Security Type - Trunk... and if u have valid password then you will be fed the dial tone of second line.. and then u can dial whichever no. u wish to. Nitin Joey del Mundo <[EMAIL PROTECTE

Re: KX-T: Back to Back PRI

Thanx a million [EMAIL PROTECTED] wrote:it's not going to be a great distance, maybe a few hundred feet or maybe 100 meters. Otherwise, it's Adtran, or S.I. Tech fiber modems. S.I. Tech has a T1/E1 over Fiber solution for Panasonic systems. Here's a link for them http://www.sitech-bitdriver

KX-T: Back to Back PRI

Dear All, Whats the MAX. DISTANCE we can cover if we connect Two TDA200 Systems back to back using a PRI (TDA0290) Card. (NO Modems) Cable used will be a CAT5/CAT6. Actaully I need to connect 2 diff. buildings of the same company located at some distance from each other. Regards Nitin _

Re: KX-T: 7665

No.. Never experienced any problems with 7665.. seems a good phone.. (till date atleast) Jody Eiecom Mail <[EMAIL PROTECTED]> wrote: Hi list Has anyone had a problem with the 7665 phones? A colleague of mine has had a pile of them going faulty over the last while and all of them with the

KX-T: TD500 & TDA200

Dear All, Anyone has ever conected a TDA200 and TD500 using a Pair of PRI Cards Using QSIG. (Back to Back Connection) Where in one system is Master and other is slave. Which is the better option TDA200 is QSIG Master or TD500 is QSIG Master. What are the available features & Whats the lim

Re: KX-T: Moving CO lines

yes.. u could have made the two lines in NOT CONNECTED mode in through programming.. 400 If I am correct.. but it would not have changed the line nos. though Hope this is sufficient.. Nitin Jim McAtee <[EMAIL PROTECTED]> wrote: We have a KX-TD1232 and until recently had eight CO lines. We ju

KX-T: Broad-band

Hi all, Is there any way we can connect a Broadband Internet connection to KX-TD/KX-TDA series and give dial up like access to extension users? any ideas or its just not possible.. Regards Nitin __ Do You Yahoo!? Tired of spam? Yahoo! Mail

Re: KX-T: Operator extension

We have trried this at one of our customer place.. he has a Double TD installed (24x96) We have defined Jack 01 & Jack 02 as Operator in Prog. Code 006 connected KX-T7433 on each Jack, Enabled "Call Forward when Busy" to each Jack's XDP Extension. Our problem was like this - people complained t

KX-T: TD500

Is it possible to configure KX-TD500 as follows 1 - 8 Port LCOT (180) 3 - ISDN PRI (290) 8 Digital Hybrid Extensions 400 Analog Extensoions.. please revert back Nitin - Yahoo! Mail Mobile Take Yahoo! Mail with you! Check email on your mobile

Re: KX-T: TD500 to TDA200 Board Question

Use KX-TDA0180 / 181 depending on no. of lines. As long as your output of non-standard lines is coming in form of a RJ11 Jack that fits in a Normal Analog Phone you can use KX-TDA0180/181. Remember 180 Supports 8 whereas 181 supports 16 analog trunks. Regards Nitin Henry C Robertelli <[EMAIL P

KX-T: Auto Redial

I am using a TDA100 with ISDN PRI. 10 nos KX-T7665s and 2 Nos. 7636s Auto Redial function doesnt work on KX-T7665... works fine on KX-T7636.. Any Ideas whats the problem.. Nitin __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam pr

Re: KX-T: Panasonic KX-TE PBX System

Hi, Have the details with me .. If u need them let me know... will mail the files.. rt now using my gprs to access net.. so will be foolish to attach the files now. will do it tomorrow if at all u guys need it.. "Michael N. Marcus" <[EMAIL PROTECTED]> wrote: - Original Message - Fro

KX-T: Linking of 2 TDA200s

Need Help 2 Sites 18 KM apart. TDA200s installed. V2,0 PRI Cards in both systems. Customer has a Radio Link. Needs 10-12 channels. If I connect both the systems back-to-back on PRI QSIG and put the channels I dont need in OUS will the bandwidth consuption get reduced from 2MBPS to pro-ret

KX-T: TD500 - Incoming Call Ringing on Paging Ports

Hi all, Have a TD-500BX installed at a customer place. He has an odd requirement. Wants 1. incoming calls on Trunk Lines to be diverted to Paging equipment. 2. Then the caller should be heard on the Speakers. 3. Person for whom the call has come goes to a near-by extension and picks up the call

KX-T: KX-TDA European Version

Dear All, I am trying to install a KX-TDA0144 with KX-TDA0142 on a KX-TDA100BX (India Version) The cell station literature mentions it can be used only with a European TDA PBX, Can some one mail me the European Version of TDA Series Ver1.1 Software??? Regards and Thanx in Advance... Niti

KX-T: KXTDA Dect

Hi, I have a TDA100 with S/W Version : 1.1012 Installing a KX-TDA0144 CSIF8 on it.. Ver: 1.004 Card is OUS all the time... If I try to make it INS the RED LED on card blinks for some time .. but status remains same... can anyone help?? Regards Nitin

KX-T: Ringing In TD1232

Hi All, Can we make the ringing pattern of Intercom Rings in TD1232 a bit more rapid?? As you all know.. its ring-ring ...Paussse ring-ring... can we make this ...Paussse somewhat smaller ?? maybe = Pause Customers are complaining that when a call sta

KX-T: TDA100/200

Dear All, have to give a presentation of TDA100/200 to my Sales staff. Responsibility is on me to prepare it... does someone has a presentation that can be used to give inputs to our own sales force? I will appriciate ur help. I have a ppt file prepared but finding it grossly insufficient..

Re: KX-T: KXTD1232 Question

Dear Daniel. Extension is LOCKED... so go to the operator extension use prgoram99, "01" enter ext. no. and select UNLOCK., Problem solved... Nitin Daniel J Anderson <[EMAIL PROTECTED]> wrote: KXTD1232 been in operation for years. One user reports that they can no longer make outgoing call

KX-T: CLI on SLC Extensions in TDA

can we have Caller ID seen on the SLC cards Extensions in KX-TDA systems? If yes whats the programming? Can some one help me? Regards Nitin - Do you Yahoo!? New and Improved Yahoo! Mail - 100MB free storage! ___

Re: KX-T: kx-t336, ip voice terminal, trunk

Hi, Just put that trunk no. in a different group.. i.e. TRUNK GROUP.. and access it.. in TD1232 we do it by putting such trunks in group 8 and dial 88 to access that trunk.. thats it.. Diego Felipe Rojas <[EMAIL PROTECTED]> wrote: I am installing an IP voice terminal like a trunk, i want the