Re: open firmware and my etch boot

-only initrd=/boot/initrd.img initrd-size=8192 * ofpath /dev/sda4 /[EMAIL PROTECTED]/ATTO,[EMAIL PROTECTED],1/@0:4 I was in partition 4 getting all the above information. xavier grave wrote: Hi Eric, I just

Re: open firmware and my etch boot

in yaboot.conf or open firmware? xavier grave wrote: May be you should replace the device line by : device=hd: xavier Le vendredi 15 juin 2007 à 07:50 -0400, eric a écrit : *yaboot.conf** boot=/dev/sda3 device=/[EMAIL PROTECTED]/ATTO,[EMAIL

Re: open firmware and my etch boot

device=hd: partition=4 root=/dev/sda4 timeout=30 ... I had to do this on my old dual G5... Le vendredi 15 juin 2007 à 09:50 -0400, eric a écrit : in yaboot.conf or open firmware? xavier grave wrote: May be you should replace the device line by : device=hd: xavier Le vendredi 15 juin 2007

Re: open firmware and my etch boot

apple_bootstrap? eric wrote: Ok, I edited yaboot.conf. could you help me with open firmware? At one point open firmware was going to a linux 1st stage, but now I just get the mac question mark. my boot-device and boot-command are: boot-device /[EMAIL PROTECTED]/ATTO,[EMAIL PROTECTED

Re: XFree86 config for tibook 667

ing. If I can't find another bootable kernel i'm gonna have to start over.. eric

Re: MountX?

to do this in OS X's cli but havn't figured it out yet. i just can't remember the exact name of my other kernel.. and am not looking forward to starting all over over again. eric

Re: mice and x

illa (I haven't been concentrating on getting a real (IMO) emailer to work... yah, GNOME gets started from within X, duh me. gnome desktop and so forth. Thanx for the help :-). eric

Re: Kernel help for newbie

ly (re)booting from quik and not mac os/bootx. for my setup, i used: 1) nvsetenv boot-device "$(ofpath /dev/sdb)0" 2) nvsetenv boot-command "begin boot catch 100 ms cr again" 3) nvsetenv output-device /chaos/control 4) nvsetenv input-device kbd 5) quik -f YMMV. eric -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Recommended kernel? (current one crashes)

gt; kernel-image-2.4.18-powerpc? Which one should I take preferably? > (I have a PowerBook G4.) the newpmac iirc is for the newer pmacs, like the tibook, the G4 desktops, the newer G3s, etc. pesonally with ur box i'd go for the newpmac, but that's me. eric -BEGIN PGP SIGNATURE--

Re: Disabling mouse buttons emulation

. also, i suggest checking your quik.conf, yaboot.conf, or whatever you're using as a bootloader config file. check your mac_hid directory (unless you already did, then just ignore this last). eric -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: XF86Config for old-world Mac

quot;true" > (**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 > (II) XINPUT: Adding extended input device "Configured > Mouse" (type: MOUSE) > > Fatal server error: > Caught signal 11. Server aborting > > if you have a 2 button mouse, use the emulate 3 buttons, otherwise, take it out. if u use the adb mouse, take it out, and a 3 button, you don't need it. eric -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: capslock fix for powerbooks

1 1/2 pages long :). eric > > jas. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

older powermacs was: Re: Multiple Swap Partitions? Re: Sudden loss ...

(GB seagate, 7200 rpm). the only times that i've had to reboot were when i was changing the kernel and moving all the files to the new drive. eric > Anthony -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Why is quik statically linked?

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 16 April, 2002 14:17, Adam C Powell IV wrote: > > > Doesn't the actual quik binary just process quik.conf and set up the > boot blocks? Like Jens, I don't see why this needs to be statically > linked. > yup, it sets up first.b and second.b, and the

Re: booting powebook g3 wallstreet with quik (help!)

mrc?" true > > I read something about setting OF variables, but dont know if and how to do > so! > Anyone willing to give a short step by step explanation of how to set things > up? > all of these (except for quik -f , can be set from OF, but instead of nvsetenv, it'

Re: which is the latest kernel-image for powerpc's

be able to identify sites which are > incomplete and sites which carry the full mirror of that particular > release. > i totally agree on that, it doesn't always work. yes it would be useful, and would save people some aggravation :). eric > -Lars > > On Mon, 22 Apr 2002

Booting the netinst CD image on a Mac mini

x27; at startup, the mac don't boot on the Debian cd but start MacOs. I haven't a apple keyboard, I use my pc keyboard a logitech. Any suggestions to install Debian are much appreciated!!! Thanks. Eric -- N'oubliez jamais que ce qu'il y a d'encombrant dans la morale, c'

Re: Booting the netinst CD image on a Mac mini

, just the configuration to finish :-)) Eric -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

[keybord] [X] space key problem....

o switch back to the console oops. there's something wrong did I do something wrong ?? thank's for any advice. Eric ps and oh an other thing, while working under the console both caps-lock and num-lock sends hid.c: ctrl urb status -32 received

new package to enable mouse button emulation

through. It still needs a little cleaning up, and i need someone to sponsor it, since I'm still waiting for DAM approval. Also, its currently called powerpc-mouse, which i think is a pretty bad name. Maybe apple-mice? What does everyone think? Eric Dorland [EMAIL PROTECTED] ICQ: #61138586

Re: new package to enable mouse button emulation

* Vinod Kurup ([EMAIL PROTECTED]) wrote: > On Sun, Feb 04, 2001 at 07:39:43PM -0500, Eric Dorland wrote: > > Hmm, the subject kinda of says it all. I wrote a init script and > > debconf scripts to enable 3 mouse button emulation for the newer kernels > > with input layer

Re: new package to enable mouse button emulation

> On Sun, Feb 04, 2001 at 07:39:43PM -0500, Eric Dorland wrote: > > Hmm, the subject kinda of says it all. I wrote a init script and > > debconf scripts to enable 3 mouse button emulation for the newer kernels > > with input layer support. It took me a while to figure out

Re: new package to enable mouse button emulation

Yes this is exactly what it does. And it always asks before blowing stuff away :) * Ethan Benson ([EMAIL PROTECTED]) wrote: > On Mon, Feb 05, 2001 at 06:12:35PM -0500, Eric Dorland wrote: > > Hmmm, yes this is probably the way to go. I guess you could argue that > > not eve

Re: new package to enable mouse button emulation

Ok, i've filled the wishlist bug, thanks a lot :) * Daniel Jacobowitz ([EMAIL PROTECTED]) wrote: > On Sun, Feb 04, 2001 at 07:39:43PM -0500, Eric Dorland wrote: > > Hmm, the subject kinda of says it all. I wrote a init script and > > debconf scripts to enable 3 mouse butt

Re: Kernel panic in Debian Install

27;t know what to do next. I really want to install debian. just start the installation again, and this time everithing should run fine. Eric -- donc, si tu n'en a rien à foutre tu ne lis pas les mess qui ne te sont pas adressés, c'est le problème de poster sur plusieurs fo

netscape ??

Hello, i'm just finishing to install the powerbook (pismo) of my boss. she want's to be abble to use netscape. when I apt-get install netscape (or communicator or wathever) I get the following error Sorry the following packages have unmet dependencies: netscape: Depends: communicator

debian2.2r2 on powerbook G4

w one ?? any advice ?? Thank's Eric -- TN: Hahahahahah ! Ma copine aussi est utilisable sous Linux ;-) ST: C'est quelle version , ta copine ? TN: Beta 1 ;-))) JP: C'est quel type de license ? -+- TN in Guide du linuxien pervers : "pas le rouleau à patisserie

Re: debian2.2r2 on powerbook G4

On Mon, 5 Mar 2001, Alan DuBoff wrote: > Eric Deveaud wrote: > > > I'm trying to install debian on a powerbook G4 (titanium). > > > > as the cd is non bootable, I grab the linux kernel and ramdisk.image.gz > > from /potato/main/disks-powerpc/2.2.19-2000-12-03/po

Re: debian-powerpc: Apple Titanium notebooks ?

th a pismo500) but it's fast. Eric -- TN: Hahahahahah ! Ma copine aussi est utilisable sous Linux ;-) ST: C'est quelle version , ta copine ? TN: Beta 1 ;-))) JP: C'est quel type de license ? -+- TN in Guide du linuxien pervers : "pas le rouleau à patisserie

Re: Email client and conversion from Netscape Mail on win32

o big problems. Once Netscape was on linux I put the Mac files in that matched the linux files. Backup of the orignals would be a good idea. It was pretty manual but it worked okay. Netscape does crash occasionally on Linux and Mac just so you know. Hope this helps, Eric :-)

Re: rsync-ing ftp directories ? [Resend]

On Thu, 8 Mar 2001, Andrei Verovski wrote: Hi, > > Anyone can suggest how I can make scheduled sync ftp directories with > rsync and cron? Everytime I am trying to do it i've got stupid message > "module name must be defined". with rsync I duno why don't

Xserver boot problem: Mouse won't load

any suggestions at all, I would greatly appreciate them. Thanks in advance -- Eric

Yaboot 0.6

ounted the boot partition during installation, it even recognized it as a boot partition and prompted me as such, but is there some other step that I missed? Thanks. -- Eric

Gnome: Where's my panel?

ig file or something to specify this stuff? Thanks. -- Eric

report install debian on powerbook G4

X, compile a fitted kernel for this machine, and so on ;-)) just a note, as I've read on list, eth drivers for the eth card of the TiG4 are not so good. Eric -- l [e2fsck] a bien démarré, mais il m'a rendu la main aussitot en me > disant "houlala, c'est pa

Re: report install debian on powerbook G4

On Mon, 12 Mar 2001, Ethan Benson wrote: > On Mon, Mar 12, 2001 at 06:53:35PM +0100, Eric Deveaud wrote: > > > 4) get the SystemDisk tool from apple > >ftp://ftp.apple.com/developer/macosxserver/utilities/> > >with this one note the number of the partition or

Gnome trouble: No panel

from the console with the command: Panel &. But there are errors on the console and when I close the console, the panel disappears. Well, any info would be helpful, thanks. -- Eric

Re: french keyboard missing | and \

On Thu, 12 Apr 2001, Bruno Waes wrote: > euhm, any solution for the french (belgian) keyboard that doesnt have a | or > \ character on the keyboard ? > or would i have to look out for a new keyb see http://www.linux-france.org/article/materiel/mac/#clavier> Eric -- JdC&

Re: potato r3 is out, includes working boot floppies (was: Re: new potato boot-floppies)

directory driver-1.img, it request me a different floppy... Any idea? -- __ / ` Eric Valette - Canon CRF /-- __ o _. Canon Development Europe Team Leader (___, / (_(_(__ Rue de la touche lambert 35517 Cesson-Sevi

Re: USB Mouse Problem

could be compatible.. as my pismo tolds me in this momment.(I can't break it ie switch to Xfree4, for the momment. I need it in a stable and working state) did you have the /dev/input/mice is your /dev/usbmouse a symlink to /dev/input/mice Eric -- «Ca te derange ??? Je fait ce qu

Re: I sometimes lose 'q' key in profit of 'a' using mac-fr3 keymap... (fwd)

i value on the numerical keyboard, while pressing the command(apple) key. it saves me some times, while installing debian on various Mac, whith azerty keyboards Eric -- A noter que si on a installé Macsbug, on peut avoir accès à une fenêtre bien plus grande, bourrée d'informat

Re: French Keyboard

2 [A] and no [Q], and it¹s hard to Quit ! the french keymap is a little broken. for a `working one' see http://www.linux-france.org/article/materiel/mac/#clavier> for the missing q just remember that you can use the ascii key-codes q=option-1-1-3 (the number must be typed on the numeri

Xfree86-4.0.3 - iMac revA

while using the following Device section everything is OK Section "Device" Identifier "Card0" Driver "fbdev" Option "UseFBDev" EndSection what I did wrong ?? Eric NB here a some more details about the machine

Re: Xfree86-4.0.3 - iMac revA

On Sat, 2 Jun 2001, Michel Dänzer wrote: > Eric Deveaud wrote: > > > X starts correctly, BUT (yes there's a but) all the text is displayed in > > a `kind of mirror' mode, ie all letter are reversed. > > > It's a driver bug which will be fixed in 4.1.0 a

Re: Xfree86-4.0.3 - iMac revA

On Sun, 3 Jun 2001, Michel Dänzer wrote: > Eric Deveaud wrote: > > I'll grab the cvs tree to see how it works. > > Make sure to get xf-4_1-branch or xf-4_1_0, the trunk might be broken. thank's for the advice. I'll let you know it works. Eric -- L

Re: mozilla - 5 processes using 149Mb

that you don't NEED a debian package of > > galeon, its very clean and well behaved for source installation: > > > > ./configure > > make > > su -c 'make install' > > And pollute my clean debian install, on way, ... in this case why not ./config

benh kernel 2.4.6 + gpm

Hi, I just finished to rsync and compile benh kernel for my pismo(thank's ben for your work) and I notice a problem wille using gpm, with my usb external 3 buttons mouse as I spend a lot of time in console mode, I eavily use gpm. with 2.2.19 everything is OK with benh kernel, when I mous

Re: benh kernel 2.4.6 + gpm

onfig CONFIG_VGA_CONSOLE=y ok, I clean rebuild. thank's Eric -- Si maintenant on introduit le concept de normalité des bugs, où va l'informatique ? Chez Microsoft ? Ah oui, pas faux ça. -+- GG in Guide du Macounet Pervers : R i F, you'll be Buggified -+-

Re: benh kernel 2.4.6 + gpm

On Mon, 9 Jul 2001, Eric Deveaud wrote: > let's see. > yoko:~ > grep CONFIG_VGA_CONSOLE /usr/src/linux/.config > CONFIG_VGA_CONSOLE=y > > ok, I clean rebuild. thank's it solve the problem. Eric -- ED : (Intel) ne fait que des circuits electroni

Re: Dual booting?

that check the yaboot/ybin sections. NB man yaboot.conf is very informative. Eric -- TN : Désolé mais cette expression n'a aucun sens ... SP : Il est informaticien, alors, tant que tu compiles pas, ses paroles : n'ont aucun sens... -+ SP in Guide du Macounet Pervers : Bien Compiler Son Informaticien +-

IBM js20 etch amdk111 ide bus

have tried various methods to rebuild a kernel with this compiled in, and re-author the debian cd with little success. Does anyone have recommendations on how to get/build a debian etch cd with amdk111 support? Thanks, Eric Schoeller Computational Science Center University of Colorado at

Re: Debian has failed us

ated. On the contrary, he attacked nobody personally, and his tone was not inflammatory. Your response made an unfortunate situation worse. It's you who should apologize. -- Eric Cooper e c c @ c m u . e d u -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject o

open firmware and my etch boot

I have a Apple G4 server model M5183. I've install Etch without a problem, however when I get to second stage boot... it freezes or hangs then the monitor turns black. my boot-device for open firmware(3)is: boot-device /pci/ATTO,[EMAIL PROTECTED]/@0:11,\\:tbxi

Re: open firmware and my etch boot

? Thanks. xavier grave wrote: Le mardi 12 juin 2007 à 09:52 -0400, Eric Benoit a écrit : I have a Apple G4 server model M5183. I've install Etch without a problem, however when I get to second stage boot... it freezes or hangs then the monitor turns black. my boot-device for open fir

Re: GUI Text Editor for GNOME

You can control line numbering, text wrapping, etc. in the Edit > Preferences dialog. -- Eric Cooper e c c @ c m u . e d u -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: USB microphone or webcam with in-built mphone on iBook 300MHz

lets you connect an analog microphone. -- Eric Cooper e c c @ c m u . e d u -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: USB microphone or webcam with in-built mphone on iBook 300MHz

n to a stereo system. But this page says the capture function should work too: http://seehuhn.de/pages/imic -- Eric Cooper e c c @ c m u . e d u -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

2 oldworld Power Macs available to a good home

IMO these are too slow to do any native development/building; I always cross-compiled their kernels on faster machines. But they might be OK for doing QA on installers, bootloaders, or other PowerMac-specific stuff. Please contact me off-list if you need more details. -- Eric Cooper

Re: Cross-compile PPC kernel on x86

powerpc --revision=test.kernel_image I've been using prebuilt kernels for a while, so this may be out of date, but I used to use this: make-kpkg --arch powerpc --subarch pmac --cross-compile powerpc-linux ... It will look for cross-tools in your PATH that are named powerpc-linux-gcc, powerpc-l

bug in rcp

lid_machine_name:/tmp Memory fault -- __ / ` Eric Valette /-- __ o _. Canon CRF - Communication Dept (___, / (_(_(__ Rue de la touche lambert 35517 Cesson-Sevigne Cedex

Incorrect optimization on PowerPC due to volatile keyword (gcc-2.95.1 official)

rn type; } main() { IMFS_token_types type; char token[ IMFS_NAME_MAX + 1 ]; char path [4]; int len; int i = 0; strcpy(path, "dev"); memset(token, 0, sizeof(token)); type = IMFS_get_token( &path[i], token, &len ); printf("token = %s\n", token); }

Incorrect loop generation code generated by gcc-2.95.2 configured for PPC target (powerpc-rtems) (extracted directly from cvs the 21/10/99)

s in the asm code. NB : THIS IS A VERY SEVERE BUG. -- __ / ` Eric Valette /-- __ o _. Canon CRF (___, / (_(_(__ Rue de la touche lambert 35517 Cesson-Sevigne Cedex Tel: +33 (0)2

Re: PowerMac kernels with GCC 2.95.1

t; kernels? Is there some other compiler I should be using (older Shaw> GCC)? I would suggest to upgrade to gcc-2.95.2 as there are severe bug for PPC with 2.95.1 (incorrect loop generation, mishandling of volatile keyword, ...). -- __ /

Re: gcc 2.95.2 vs 2.91

mpac and efficient than with egcs 1.1.2... Its free software guys. I you submit good bug reports, be sure the cygnus folks and and other GCC gurus will fix them. Alos note that there are *clear* warnings with the asm macros on the gcc page... -- __ / `

Re: gcc 2.95.2 vs 2.91

port it on my MCP750 and will tell you how it goes. NB : be sure you use -fno-strict-aliasing when compiling as linux is known to be broken using the strict-aliasin option. -- __ / ` Eric Valette /-- __ o _.

Re: [Fwd: trackpad-g3 powerbook]

On Tue, 23 May 2000, Ethan Benson wrote: > On Tue, May 23, 2000 at 05:10:11AM -0500, Joshua Holland wrote: > > > sorry to disturb you, but as I'm a full newbee, could you explain me how > > > you install the trackpad_tool. > > > > I'm pretty new at this too, so let me remember what I did... > > D

Re: [Fwd: trackpad-g3 powerbook]

path/to/your/trackpad_tool notap third as root chmod 755 the script fourth as root ln -s /etc/rc2.d/trackpad_no_tap /etc/rcN.d/trackpad_no_tap where N is your default runlevel when is done, each time you will boot your powerbook, the track-pad tapping will be disabled Eric PS I do thi

Re: [Fwd: trackpad-g3 powerbook]

On Tue, 23 May 2000, Ethan Benson wrote: > On Tue, May 23, 2000 at 01:38:03PM +0200, Eric Deveaud wrote: > > > > first > > take a look at /etc/inittab, to see your default runlevel. > > usually with debian, runlevel is 2 > > # The default runlevel. > >

Re: PowerBook (FW) - hints and tips

On Wed, 7 Jun 2000, Olaf Grewe wrote: > > > > >Yep, you can alienate those RPMs or try my tarballs: > > > >http://n.ethz.ch/student/download/XFree86/ > > > I'm afraid that link is broken... it seem's to be it's currently pointing to the tarb

date problem on pismo

Hello, I'm in trouble with my date settings on powerbook G3 firewire (pismo) running debian potato, and MacOs 9.04 currently my date in losing time everydays. I loose 1 hour evry 4 days. (anoying for compilation an other things...) I don't have any idea from where the problem comm

Re: date problem on pismo

is an issue > that you can solve via AppleCare... let see I hoppe it's just a soft error, or mistake i've done. Eric -- AB : (...) et encore on semble échapper aux betas :-, LF : bah peut-être qu'ils en font plus ;-) GG : Ils auraient embauché des types de Microsoft ? -+- GG in Guide du Macounet Pervers : Bah oui, gros béta ! -+-

Re: date problem on pismo

On Tue, 13 Jun 2000, Sergio Brandano wrote: > > Then > 1. remove /etc/adjtime > 2. set the timezone > 3. reset the clock from MacOS. > > Ensure that no linux program modifies the clock. stage 1 and 3 were done, but I havn't set the timezone Eric --

Re: date problem on pismo

On Tue, 13 Jun 2000, Sergio Brandano wrote: > > > stage 1 and 3 were done, but I havn't set the timezone > > You have to. done, I'll tell you the result in 2-3 days Eric -- Si maintenant on introduit le concept de normalité des bugs, où va l'info

Re: X Trouble

nux/pbg3.html> the source code is here http://xenu.phys.uit.no/~alvin/linux/trackpad_tool.tar.gz> Eric -- Je veux acheter un boomerang neuf. Comment puis-je me debarrasser du vieux?

Mising Package on debian PPC

qqq Obsolete/local Extra packages in section utils qqq *** Xtr utilskbd 0.99-8 -- __ / ` Eric Valette - Canon CRF /-- __ o

Re: g3 pismo - monitor out

need XFree86 4.0 Have'nt tested it, but here is the solution enjoy Eric -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- From [EMAIL PROTECTED] Tue Jul 25 08:56:53 2000 Date: Thu, 15 Jun 2000 17:24:08 -0500 From: Rob Minerick <[EMAIL PR

Debian 2.2 Installer kernel image for MCP750

If someone give me an FTP access somewhere, I can upload a linux+ramdisk image enabling to install potato on motorola MCP750 via PPCBUG. kernel = 2.2.17pre9 + MCP750 specific patches... -- __ / ` Eric Valette - Canon CRF /-- __ o

RE: Embedded Debian (was: compaq iPaq)

Ag, evil. If you plan to use busybox upgrade to .46 there are some serious problems with .45 in regards to tar and nfs. On Wed, 16 Aug 2000, Frank Smith wrote: > > Hi Ben, > > Ben Armstrong wrote: > > > anywhere else in Debian? It's curious that busybox isn't packaged > > separately. > > A

Re: mac on linux compilation

On Tue, 12 Sep 2000, Clay Ginsburg wrote: > Oh one other thing, what is the best way to emulate a 2 button or 3 > button mouse for X(in particular either afterstep or kde). emulation of mouse buttons depends on wich Xserver your using. in Xpmac-rev10 you should emulate the buttons with the foll

Re: mac on linux compilation

On Tue, 12 Sep 2000, Michel Dänzer wrote: > Eric Deveaud wrote: > > > and sotty I don't now yet how to done the same with Xfree86-fbdev nor > > Xfre86-4.*. > > It's not done by the server there but by the kernel. The > adb_buttons=, kernel option for 2.2 ke

Re: potato install problems

lowdog kernel that does boot but the install then stops at the > first screen of dinstall. apparently i can't proceed because the > keyboard doesn't work at all. no enter, no space, no way to go om. use the kernel from Benh's page. http://ppclinux.apple.com/~benh/> use yaboot

RS-6000 43P

ht on my situation I'd greatly appreciate. If you want specific errors and such let me know and I'll give them to you. Thanks in advance! Eric

Building PPC Kernel

OK I just got done reading through IBM's sketchy information pages, and it appears as though I need to build a 2.4 kernel in order to be able to boot off of my RS-6000 43P 240 machine. Can I build a kernel for a PPC architecture on an i386 machine, or do I have to find (fat chance) a powerpc m

Re: Building PPC Kernel

At 10:38 PM 10/11/00 , Ethan Benson wrote: On Wed, Oct 11, 2000 at 10:27:35PM -0400, Eric Reischer wrote: > OK I just got done reading through IBM's sketchy information pages, and it > appears as though I need to build a 2.4 kernel in order to be able to boot > off of my RS-6000 4

Tweaking Kernel Makefile

to be the only variable affecting how the kernel is built. Eric

zsh-dev version ???

7;s a developement version no ?? correct me if I'm wrong. is it normal to get a developpemnt version of something when using a "stable" distribution ??? OK you will answer, that zsh-3.0.7 is still available, and "aptable" Eric -- à mail and news de microsoft, ont pouva

Re: zsh-dev version ???

On Tue, 17 Oct 2000, Daniel Jacobowitz wrote: > On Tue, Oct 17, 2000 at 04:16:50PM +0200, Eric Deveaud wrote: > > > > > > Hello, > > > > could someone explain me one thing ?? > > > > with an /etc/apt/source.list pointing to stable > >

Kernel image

If anybody is running an RS-6000 43P that has a 2.4 kernel built, could you please sent it to me (off list)? I don't have a PowerPC machine to build a kernel on, and none of the ones offered with any of the distros are working with my machine. Thanks. Eric

Re: Kernel image

I have tried setting up cross-compiling, but never found all the necessary source files to make the compiler. Eric At 07:49 AM 10/24/00 , Rob Andrews wrote: In newsgate.debian.powerpc, Eric Reischer wrote: > If anybody is running an RS-6000 43P that has a 2.4 kernel built, could

Re: Xpmac or XFree4

it's the binary (don't know where to find Xpmac sources) drop it in /usr/bin/X11 (or somewhere else) chmod 755 the binary modify your /etc/X11/Xserver to use Xpmac Eric NB you will need xfonts-scalable in order to use Xpmac. -- tu as aussi la [MacsBug 6.5.4]a7 qui est appar

/proc/self/maps ---p segment

000 03:06 30727 /lib/libc-2.1.1.so ` -- Eric Marsden http://www.laas.fr/~emarsden/>

Re: Innd problems

Try checking the permissions and ownership on it. I've had that problem before, but it wasn't with lnnd. Eric At 03:53 PM 10/26/00 , Paul Talacko wrote: I can't get Innd to start and keep getting this error in my syslog: SERVER cant bdzinit /var/lib/news/history No such fi

Re: Kernel Image

der (which is where I ran the ../configure from) My ultimate aim, obviously from the above, is to make a ppc cross-compiler on an intel machine. Eric

Network Boot Problems

ce of it failing part-way through. Anybody seen this before? -- Eric Reischer "You can't depend on your eyes [EMAIL PROTECTED] if your imagination is out of focus." [EMAIL PROTECTED]-- Mark Twain --

Kernel build crapped out

event': drivers/input/inputdrv.o(.text+0x16bc): undefined reference to 'emulate_raw' drivers/input/inputdrv.o(.text+0x16bc): relocation truncated to fit: R_PPC_REL24 emulate_raw make: *** [vmlinux] Error 1 Anybody know what I'm doing wrong; or if it's a bug, is there a patc

Re: Kernel build crapped out

Sorry about that.I'm compiling a 2.4test9 kernel. And when I did the config, I issued the command: make CROSS_COMPILE=powerpc-unknown-linux-gnu- ARCH=ppc config which automatically put the CONFIG_PPC entry in the autoconf.h file. Eric At 02:33 AM 10/31/00 , Martin Costabel wrote:

Re: Kernel build crapped out

Is this something that should be submitted to the Linux Kernel mailing list to be fixed by the next kernel prerelease? Eric At 06:49 PM 10/31/00 , Martin Costabel wrote: Eric Reischer wrote: > > Sorry about that.I'm compiling a 2.4test9 kernel. And when I did the > config

kernel compile

in the xconfig window.  Is there a dependency that I don't know about here? Eric Reischer   "You can't depend on your eyes [EMAIL PROTECTED]    if your imagination is o

INIT frezzes on boot

guessing it's trying to load init or something. Ctrl-Alt-Del still works, and it does a clean reboot, but I don't get the usual init messages that go along with it (e.g. INIT: Switching to runlevel 6), so I'm assuming that the machine is not "hung", but is instead

pmud.deb ??

Hello I'm wondering if pmud-0.7 was packaged for debian, or if I should compile it from pmud-0.7-1.src.rpm or 'alienate' the pmud-0.7-1.ppc.rpm thanks Eric -- CF: Et ton serveur l'a accepté? Moi quand ça m'arrive, j'ai un message : d&#

  1   2   3   4   5   >