Re: ATI rage Pro on iMac G3

? (try lspci) > > > :00:10:0 Display Controller: Advanced Micro Devices, Inc. [AMD/ATI] > Rage 4 [Rage 128 PRO AGP 4X] > > https://we.tl/t-eTuylBwtlI > > > Did it work in the past or is this your first install? > Several installations. Never worked before. >Fr

Re: Debian on IBM RS/6000 7248-43p

On Thu, 11 May 2023 14:41:19 +0200, John Paul Adrian Glaubitz wrote: > On Thu, 2023-05-11 at 08:21 -0400, Lennart Sorensen wrote: >> Well I have seen lots of people say woody worked on that machine. >> Not sure how late support for that hardware stuck around. After all >> 192MB ram and 133MHz 604

Re: Debian on IBM RS/6000 7248-43p

On Thu, 11 May 2023 13:34:48 +0200, Alexander Huemer wrote: > On Thu, May 11, 2023 at 01:26:32PM +0200, Gabriel Paubert wrote: >> On Thu, May 11, 2023 at 01:03:21PM +0200, Alexander Huemer wrote: >> > Hi! >> > >> > On Thu, May 11, 2023 at 12:12:40PM +0200, John Paul Adrian Glaubitz >> > wrote: >>

Re: Q: double Boot for SMP 7300

and then start BootX to run linux, the second cpu >won´t run and I run a single cpu computer :-( >If I set the startup disk to the faked system-folder (AFAIK miBoot) both >cpus are running, but it is very difficult for me to get back to MacOS. >Zapping P-RAM isn´t always possible and did n

Re: can not launch xfree86 on debian linux on ibook G3

Hallo! I just got the new ibook G3 which has the ATI Radeon 7500 32MB card (12.1" screen). I am trying install debian linux on it. But I got the problem whem I try to make xfree86 work. The saw the same problem on the mail list but I didn�t find the solution this is the error that

SCSI problems with benh kernel 2.4.21...

Im running Debian Linux for powerpc with Benh kernel 2.4.21 (installed pre-compiled for OW SCSI) on a Macintosh PowerPC 9600/300. I have some problems I would like to get some help with. Heres the first problem: SCSI device dont show! Output of lspci-vv shows that the system can see my SCSI c

I can't install MOL

I have a PowerBook 12, Debian Sarge, kernel 2.6.15-4. I've downloaded mac-on-linux 0.9.70 but I can't get it installed (probably my fault). That's what I do (as root): bash$ tar -xzf mol-0.9.70.tgz bash$ cd mol-0.9.70 bash$ make bash$ make install (as root) After "make" I get this (I've

Power saving techniques

Hi everybody, I have a PowerBook 12-inch, 1.5Ghz (System Profiler says it's a PowerBook 6,8). I'd like to be able to save energy as much as I can while on the road; I'd like to know: 1) Does my PowerBook support cpu scaling? How do I enable it? Can I even make it run at 500Mhz or so? >>>I

Re: Power saving techniques

1) Does my PowerBook support cpu scaling? How do I enable it? Can I even make it run at 500Mhz or so? I think it runs at either half-speed or full speed. You need to enable cpufreq scaling in the kernel. Do I have to recompile kernel? How do I enable cpufreq scaling in the kernel? No, one is

Re: Power saving techniques

I have tried CPUDYND but it says "Nothing to do, exiting": does it mean my cpu (7447, pb12 1.5ghz) is unsupported? Thank you. Marco -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Updating 2.6.15 to 2.6.17-6

Hi, I've recently re-installed Debian Testing (10th July) with kernel 2.6.15. I decided to update to 2.6.17-6 but it freezes on startup on " Memory hole size: 0 MB Built 1 zonelist Kernel command line: ... mpic: ... PID hash table entries: 4096 (order: 12, 16384 bytes) GMT Delta read from XPRA

XF86Config-4 ibook2

Help please, I am trying to configure X for my ibook2. This is the little ibook, also known as ibook2001 and icebook. I know X can be configured because I had Yellowdog linux running just fine with kde and it was cool except I missed apt-get and all the wonders of debian. So I grabbed a recent

Re: XF86Config-4 ibook2

Thanks everybody for your help. I was able to configure X on my ibook2. Using Benh latest kernel and building the r128 module along with the agp that the module dependencies required, and running "dpkg-reconfigure -plow xserver-xfree86" Some of the options selected where the ati driver the ke

Re: call for ports to begin using 2.4.0 headers for glibc

On Mon, Jan 15, 2001 at 11:05:39PM -0500, Ben Collins wrote: > Well, the big deal is that to enable LFS on glibc, it must be compiled > against 2.4.0 headers. This does not break when running on 2.2.x You mean we have to make binNMUs of glibc? Or will you make a new upload which explicitly requests

Re: call for ports to begin using 2.4.0 headers for glibc

On Tue, Jan 16, 2001 at 03:34:44PM +0100, Sven LUTHER wrote: > I have a spare A1200 with 68030 processor lying around, it has no harddisk > though. > > Would that count toward donating hardware ? Send it to Ben, if he can keep up with the "speed" of the machine. Christian

SMP G4 and 22" Apple Cinema Display

How I got XFree 4.0.2 working on this machine: * got the apple cinema display patch from * applied the patch to the bitkeeper 2.4 kernel from bitkeeper.fsmlabs.com * compiled the new kernel * rebooted, with the kernel op

Re: RaiserFS PPC status

Andrei Verovski wrote: > Anyone knows what is the status of RaiserFS support on PPC kernel 2.4.x? > > Kernel compilation configuration tool (menuconfig, xconfig) presents > RaiserFS, but no status description (i.e. read-only, dongerous write, > etc.). I think that

PReP Blackhawk (Powerstack) question

ckage available I'm not sure which to dd to the partition... Respectfully, Jeremy T. Bouse -- ,-, |Jeremy T. Bouse, CCNA - UnderGrid Network Services, LLC - www.UnderGrid.net | |Public PGP/GPG finge

Re: APUS Debian Boot-Floppies Images and bugs

On Tue, May 15, 2001 at 02:45:28PM +0200, Sven LUTHER wrote: > On Tue, May 15, 2001 at 11:57:11AM +0100, Alan Buxey wrote: > > hi, > > > > > Can you boot from an external 1.76MB floppy ? > > > > yes. its treated just as the old classic external floppies that I'm sure > > most people had with thei

Re: APUS Debian Boot-Floppies Images and bugs

On Tue, May 15, 2001 at 04:23:38PM +0200, Sven LUTHER wrote: > > > > not that i can think of. certainly boot-programs (such as the > > APUS/AF-booter (by Mr Duncan ) need MUI libraries, but the plain > > boothack/bootstrap for APUS just needs powerpc.library, which is in ROM I don't use APUS, pla

Re: xfree86 4.1.0-0pre1v1 for i386 at X Strike Force repository

On Tue, Jun 12, 2001 at 12:22:08AM -0500, Branden Robinson wrote: > Here's the first cut of 4.1.0. Is there a way to avoid downloading the complete source again? I have 4.0.3, maybe I can rsync of patch or whatever? I have space and fast access at work, but only slow access at home (and no more sne

Re: 2.4.7, motorola powerstack, NCR825, SCSI timeouts...

kernel-image-* builds have do so on it's own... Respectfully, Jeremy T. Bouse christian mock was said to been seen saying: > hi, > > I can't seem to get 2.4 kernels to run reliably on my PReP moto > powerstack/riscPC box with an NCR825 wide controller. > >

Re: 2.4.7, motorola powerstack, NCR825, SCSI timeouts...

spectfully, Jeremy T. Bouse christian mock was said to been seen saying: > > Also anyone know what should be the correct steps to be taken > > to install the kernel on this beast? The initial install handled it > > fine but no other kernel-image-* builds have do so on i

Package version diffs from other ports

ier to maintain... Respectfully, Jeremy T. Bouse -- ,-, |Jeremy T. Bouse, CCNA - UnderGrid Network Services, LLC - www.UnderGrid.net | | Public PGP/GPG key available through http://wwwkeys.us.pgp.net| |

Re: Package version diffs from other ports

Daniel Jacobowitz was said to been seen saying: > On Sun, Jul 29, 2001 at 11:14:46AM -0700, Jeremy T. Bouse wrote: > > Is there any attempts being made to make sure that the same version > > of packages are available for all arches? I've just re-install'd 2 of my

Re: Package version diffs from other ports

ut if it builds and runs properly I don't see an obvious reason... Respectfuly, Jeremy T. Bouse -- ,-----, |Jeremy T. Bouse, CCNA - UnderGrid Network Services, LLC - www.UnderGrid.net | |Public PGP

Kernel source

build available through apt-get is broken... Respectfully, Jeremy T. Bouse P.S. - please don't reply to me personally and the list as I don't need double copies... Prefer replies to list as it will more than l

Issues with Debian Lenny on Powerbook G4

Hey everyone, I recently upgraded the hard drive of my laptop and decided to take the chance and plunge to lenny. I had Etch running beautifully on this laptop. The lenny experience started out beautifully but there are several issues I came across with: 1. Xorg.conf * No matter what I tr

Re: Issues with Debian Lenny on Powerbook G4

Yes I have tried the VESA drivers but there is an error when loading it. I will post the exact error messages in a follow up email. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Issues with Debian Lenny on Powerbook G4

Thanks for the quick reply... I tried that as well...I have tried almost everything. I can't seem to figure out what the problem is. Maybe what I will do is reinstall Debian Etch and do a dist-upgrade to Lenny. I hope that works. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject

Re: Issues with Debian Lenny on Powerbook G4

Hi there, I'm actually using the r128 driver. I've also tried 'ati' but no luck as well. Thanks for the reply. Amit -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

[EMAIL PROTECTED]: Bug#497165: amiga-fdisk-cross is not being built on any architecture other than i386]

Hi, could the buildd admins please enable building for amiga-fdisk and upload the resulting packages (powerpc has been built, but it seems it was never uploaded). thanks, Christian - Forwarded message from Martin Guy <[EMAIL PROTECTED]> - Subject: Bug#497165: amiga-fdisk-cross is not bei

Re: xfree86-1_3.3.4 now compiles on powerpc, mach64 mess fixed, patch included.

On Thu, 16 Sep 1999, Sven LUTHER wrote: > On Thu, Sep 16, 1999 at 09:24:17AM +0200, Sven LUTHER wrote: > Oops a little mistake came up because of the haste, correct patch is attached Just a quick question, for building xfree on m68k I had to remove mach64, imstt and pm2 from some Imakefile, since

Re: Need your input for keymap configuration

On Thu, Nov 18, 1999 at 12:35:33PM +0100, Sven LUTHER wrote: > On Tue, Nov 16, 1999 at 09:40:44PM +0100, Yann Dirson wrote: > > > A, somehow, related question. How to get a correct keymap under X? > > > > Hm, X keymap setup is currently quite a distinct thing. I hope to add > > one day support f

Re: Need your input for keymap configuration

On Thu, Nov 18, 1999 at 03:19:03PM +0100, Sven LUTHER wrote: > On the french keymap, the @ and # are mapped to the shifted * and - of the > keypad, i think. I painted the corresponding symbols on said keys, and i > worked fine since then. Excellant idea, so instead of finding a xmodmap entry we wil

Re: Need your input for keymap configuration

On Thu, Nov 18, 1999 at 11:11:59PM +0100, Yann Dirson wrote: > Christian T. Steigies writes: > > Where does X get the information about the keyboard? Its not from > > the console tools, is it? > > Generated XF86Config use an Xkb definition. If none is in XF86Config, >

Re: MD5 sum failures

sure where to look on this one but somethin tells me it's buried in APT... Respectfully, Jeremy T. Bouse, Pres/CEO UnderGrid Network Services, LLC Tom Vier was said to been seen saying: > it seems all the recently updated debs are failing MD5 sum matching. > eg

Re: netstd, fingerd and the r* gang

7;d by removing netstd then fixin it's dependencies would solve the problem... I haven't seen this issue on either of my i386 or alpha machines (4 machines total)... Respectfully, Jeremy T. Bouse UnderGrid Network Services, LLC -- ,------

Re: Debian for PPC problems

tree... the problem is with 0.3.14... As for the rest of your issues I'm unaware of them or they haven't affected me for one reason or another (ie- I don't use telnet as port 23 connections in and out are drop'd at the firewall and I don't run ircd on any of my

Re: Need your input for keymap configuration

Moin Haggie, On Wed, Jan 19, 2000 at 01:12:22PM +0100, Hartmut Koptein wrote: > as you all may know, the console-data arch-detection routine is broken. > > Powerc and m68k need some tests, i've not changed any of the m68k code, it > is the source from console-data.config. what do you want us to d

PowerPC Kernel installs

e it isn't as I'm runnin Linux not MacOS)... Respectfully, Jeremy T. Bouse UnderGrid Network Services, LLC -- ,-----, | Jeremy T. Bouse - UnderGrid Network Services, LLC - www.UnderGrid.ne

Re: PowerPC Kernel installs

eproduce whatever it did to make the system boot the kernel... Even though I"ve install'd new kernels on the system it still has yet to boot one of them... Respectfully, Jeremy T. Bouse UnderGrid Network Services, LLC -- ,---

Re: PowerPC Kernel installs

d to ensure the system is bootable as it shouldn't try to 'dd' to the partition if there isn't a PPC PReP boot partition to dd to... Respectfully, Jeremy T. Bouse UnderGrid Network Services, LLC Hartmut Koptein was said to been seen saying: > > > Ap

Debian Potato PowerPC disks-powerpc

Can anyone think of why PowerPC's boot disks for potato should still be in sid? I would think if PPC was gonna try and make it in the potato release it should be in potato not sid... Or am I missing somethin from the big picture? Respectfully, Jeremy T.

Re: PowerPC Kernel installs

C PReP Boot partition (/dev/sda2 in example)... Respectfully, Jeremy T. Bouse UnderGrid Network Services, LLC Matt Porter was said to been seen saying: > Yes, this is exactly how I implemented things in boot-floppies for PReP > systems. Fortunately, we have libfdisk the

Re: xfree86-1 3.3.6-3; 3 down, 3 to go

On Tue, Jan 25, 2000 at 11:21:28PM -0500, Branden Robinson wrote: > [Sorry for the wide crossposting.] > > xfree86-1 3.3.6-3 was installed into the archive for alpha and i386 > yesterday. > > The sparc packages are in Incoming. > > That leaves arm, m68k, and powerpc, which I traditionally do not

Re: New kernel packages available - PLEASE test!

While you were at it were you able to make changes necessary to properly install on a PPC that just needs the kernel image dd'd to the PReP boot partition? Respectfully, Jeremy T. Bouse UnderGrid Network Services, LLC Daniel Jacobowitz was said to been

Re: package update lag on powerpc

On Sun, Feb 20, 2000 at 03:08:49PM -0800, C.M. Connelly wrote: > > "DJ" == Daniel Jacobowitz <[EMAIL PROTECTED]> > > Daniel, > > DJ> I feel like I've answered this question a thousand > DJ> times There is a build daemon now, but only for > DJ> potato, and I do not have time t

Re: Storm Linux 2000

site but haven't yet burned it to a CD as I really don't have a machine I can kill in order to test it out... Respectfully, Jeremy T. Bouse UnderGrid Network Services, LLC Björn Johansson was said to been seen saying: > Hi! > > What do you think about Storm

Re: open firmware netboot?

on 9/8/00 10:46 PM, pohl at [EMAIL PROTECTED] wrote: > > Ethan wrote: >> >> this is strange and disturbing. can it read regular ISO9660 CDs? >> (debian CD 1 is hybrid ISO/HFS) > > Yes, it can read regular ISO9660s...what's more interesting is that > we have another iMac of the same vintage that

Wingman Mouse

I have a Logitech Wingman gaming mouse that I can't figure out how to get the 3rd or middle button to work. When I ran redhat, it got probed and configured automatically so I don't know what made it work. I've tried the emulate 3rd button in the XF86Setup and that did not work. Paul

Re: Wingman Mouse

on 9/9/00 12:03 AM, Paul T. McNally at [EMAIL PROTECTED] wrote: > I have a Logitech Wingman gaming mouse that I can't > figure out how to get the 3rd or middle button to work. > When I ran redhat, it got probed and configured > automatically so I don't know what made it

Re: boot-floppies 2.2.17 req'd packages

On Thu, Oct 05, 2000 at 07:36:30PM -0400, Adam Di Carlo wrote: > > Here's the list of pkgs from potato-porposed-updates which I used for > boot-floppies 2.2.17: > > base-config_0.33_i386.deb > debconf-tiny_0.2.80.17_all.deb > libc6_2.1.3-13_i386.deb > locales_2.1.3-13_i386.deb > makedev

Re: 2.4.19 -- no sound

On Wed, Aug 28, 2002 at 06:49:09PM +0100, Paul Talacko wrote: > As I posted in a previous thread, I've upgraded to 2.4.19 which has got > my RTL8029 working, but now I have no sound. No beep, nothing. Xmms > does everything fine as if it plays sound, but nothing comes out the > speaker. Using mi

Re: sources.list entries for OpenOffice doesn't work

I used the following to install/upgrade without a problem... deb http://ftp.openoffice.tuxfamily.org/openoffice testing main contrib Jeremy On Fri, Sep 06, 2002 at 04:20:37PM +0200, Roland Wegmann wrote: > Hello > > I have in mind to install OpenOffice via apt-get. So I tried ou

Tibook G4 kernel compile fails

generic_agp_enable': agpgart_be.c::400: warning: unused variable `cap_id' and so on with a bunch more warns. I haven't found any info on this so far. I can post more error messages if necessary. Or appropriate sections from the kernel config. Any suggestions would be greatly appreci

Re: Tibook G4 kernel compile fails

> agpgart only works or even builds with Ben's tree. How does it fail > without? I did not know that... I thought the 2.4.19 kernel would build on the ti since it'd been out for a while. I was under the impression the benh kernels were the bleeding edge kernels kernels & that I could survive on

Re: Tibook G4 kernel compile fails

> If you already have a copy of the linux source, it's a lot faster to > move/copy an existing tree into place, and then rsync benh's tree on top > of that. mozilla didn't seem to want to dl the benh source too fast, but wget is moving along a lot faster. Regardless, anyone have a rsync url for t

Disabling Builting Speakers On TiBook

Is there a way to disable the built-in speakers on my TiBook? - I only want to hear stuff from the line out. I used audioctl to disable the builtins on my ultra 5, but I have yet to find a ppc (or x86) equivalent. >--))> >--))> Mark T. Valites Unix Systems Analyst 1 College Circle -

Re: Disabling Builting Speakers On TiBook

Thanks Toby, > On Fri, Sep 27, 2002 at 08:35:05AM -0400, Mark T. Valites wrote: > > Is there a way to disable the built-in speakers on my TiBook? - I only > > want to hear stuff from the line out. I used audioctl to disable the > > builtins on my ultra 5, but I have yet

Re: Disabling Builting Speakers On TiBook

a way to do this without recompiling the whole kernel? Thanks again, -Mark On Fri, 27 Sep 2002, Toby Sargeant wrote: > On Fri, Sep 27, 2002 at 09:22:04AM -0400, Mark T. Valites wrote: > > > > Hmm. Maybe it's just an esd issue then. When I use mpg123 or similar > > apps with a plu

Re: Re: Disabling Builting Speakers On TiBook

oring your the mixer parameters over reboots. > > apt-get install setmixer > > - Matt > > -- > Matt Christian [EMAIL PROTECTED] Learn to love and love to learn. > http://www.visi.com/~mattc/ 0111 ftp://ftp.visi.com/users/mattc/ > 5468652073656372657420697320131b331b2e1b311

Re: Re: Disabling Builting Speakers On TiBook

Maybe it was a combination of the mic & the line (what's the line anyways?) setmixer -V mic 0 setmixer -V line 0 Seem to have taken care of it. Thanks. On Fri, 27 Sep 2002, Mark T. Valites wrote: > Eeee!!! My ears Need to make it stop!!! > > aumix installed just f

Re: Re: Re: Disabling Builting Speakers On TiBook

> Here's the answer to the "location of the TiBook microphone" question: > > http://www.macopinion.com/columns/roadwarrior/01/02/21/talk/3.html For those who don't know, the mic's under the left speaker grate. A highly intelligent placement if you ask me... > You probably had a feedback loop whe

Re: Sys. Backup using a firewire Lacie 24x CD burner

On Thu, Oct 03, 2002 at 05:05:57PM -0400, Adam wrote: > I have been backing up my systems just by hand using tar. I have found > cd backup but I am using a firewire CD burner. I have not got any thing > running with fire wire yet. I have FW compiled into my kernel but don't > know how to access

Right clicking & pasting in X

mouse_button_emulation lets me past highlighted text with function-cntrl-option, but still no right clicking... Thanks in advance, -Mark -- >--))> >--))> Mark T. Valites Unix Systems Analyst 1 College Circle - 124b1 South Hall SUNY Geneseo Geneseo, NY 14454 585-245-5577 585-259-3471 (Cell) 585-245-5579 (Fax)

New TiBook Install Problems

t openbsd munging up my filesystem, but I suspect this is the cause. I don't have my openbsd cds with me at the moment, so I can't think of a way to dump my parition table to include in the message. I'd like to not have to wipe the hd & be able to keep openbsd. Is there any hope? (P

2.6.13 CardBus woes

port 32-bit CardBus devices is ``greyed out'' with hyphens. I assume this is because it's assumed you want 32-bit support if you've just selected that you've got a Yenta-Socket socket :-). Any info would be greatly appreciated! best regards, -- Matthew T. Atkinson <[EM

Re: 2.6.13 CardBus woes

n ITP so I can find out when it's safe to boot into my new kernel again? :-) best regards, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

gnome uninstallable on Etch?

:2.10.2.3) but it is not installable oberon:/home/matatk# Thanks in advance for any information! -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: X kills my powerbook

27;t seem to be able to install it by using the -t switch to force it to use a given distribution, as testing has 6.9 already. Please could anyone explain how I might force apt to install it? Thanks in advance, best regards, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, em

Re: X kills my powerbook

On Tue, 2006-03-28 at 15:26 +0100, Matthew T. Atkinson wrote: > Please could anyone explain how I might force apt to install it? Apologies -- my sources.list had got another sid (instead of the diseed etch) entry in there which I missed. It is now -- at last -- working again. Thanks very m

microphone recording level

ye just now, best regards, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: 2.6.16 kernel build errors

e to see if the problem remains. I'm not sure it's the same error but IMHO it fits under the thread's remit :-). Has anyone else had this problem? I have a 1.5 G4 AlBook. best regards, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTE

X Viewport Issues on certain 2.6 kernels

't compile I'm on a PowerBook5,4 (G4/1.5/15''). If anyone else has this issue, please reply! best regards, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: X Viewport Issues on certain 2.6 kernels

plained the problem -- it just locks up my machine. Also there is a thread about 2.6.16 build errors -- I can't get mine to compile at all. best regards, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: www.debian.org down?

I had noticed problems reaching www.d.o this morning but could traceroute and ping... I also noticed problems with IMs such as AIM and ICQ as well partly due to DNS resolution issues as well as network problems... All of this I noticed from 2 seperate networks on different backbone provide

[no subject]

ernel (rm -rf /my/kernel - oops), then I can't boot to the debian partition. I tried installing a second bootstrap partition & making the first point to that, but I've had no such luck so far. Any ideas on the proper way to do this? >--))> >--))> Mark T. Valites Uni

Re: Amazing I have posted twice to this list and not one answer

I'm not sure if this will solve your problem, or if it will work when "date" didn't, but try "rdate -s your.favortire.ntp.server.com" & see if you have any luck with that. And grow up, don't whine when you don't get a response to a post. That&#

X & No keyboard input with new kernels

booted either of them, I had no keyboard input. (I have no kernel parameters for either through append in yaboot.conf...) In the meantime, I'm giving a shot at the kernel compile myself. Any suggestions for X or something else I could be doing wrong kernel-wise? >--))> >--))> Mark

Re: X & No keyboard input with new kernels

>--))> >--))> Mark T. Valites Unix Systems Analyst 1 College Circle - 124b1 South Hall SUNY Geneseo Geneseo, NY 14454 585-245-5577 585-259-3471 (Cell) On 19 Apr 2002, Colin Walters wrote: > I have a first-gen tibook too; I've put my XF86Config put up at: > > http://

Re: changing extensions, a little OT perhaps.

>--))> >--))> Mark T. Valites Unix Systems Analyst 1 College Circle - 124b1 South Hall SUNY Geneseo Geneseo, NY 14454 585-245-5577 585-259-3471 (Cell) > In terminal: > > > for i in *; do >mv $i $i.mp3; > done > I've been close to this. When

Re: New xfce4 packages

on my two computers, I switched back to GNOME to see what was new in 2.8. Is there any news on when the xfce 4.2 packages will make it in? best regards, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

extremely poor bochs performance

access to a win32 version :-(. bye just now, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

installing from source

Hi: I want to know where can I set up system-wide options if I intend to install packages from source (and where do I find a list of available options). Things like setting up the processor type and (possible) optimizations. I also noted that FreeBSD has in its port system, a way of telling the

X Client Errors over SSH

was a bad request made by the client and the connection was therefore axed. Any info greatly appreciated, best regards, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: extremely poor bochs performance

forum/viewtopic.php?t=138 Are there plans to patch Debian's QEMU packages to include this fix? If none are known about, I'll file a bug to let them know about the fix. bye just now, best regards, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECT

OOo crash on startup

trying it after a sleep and after a reboot or cold start * removing the settings in my home directory and starting afresh Nothing seems to work. I would be grateful for any information you might be able to provide (error log attached). best regards, -- Matthew T. Atkinson <[EM

Re: OOo crash on startup

e so far, best regards, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: OOo crash on startup

back in didn't cause the problem to re-occur. However, it seems that as OOo is multi-threaded it is fairly random when I get the crashes anyway, so (an infinite amount of) time will tell if this has actually fixed the issue :-). Thanks to those that replied, best regards, -- Matthew T. Atk

LCD Colours Washed-Out on PowerBook5,4

es such a thing exist for Debian? Perhaps some X config options? best regards, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: LCD Colours Washed-Out on PowerBook5,4

t the correct colour profile? There are no colour temperature/contrast controls on it, like you get on desktop monitors, of course :-). Just wondering if anyone else has noticed this on their PBs... best regards, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [

Problems Playing Videos (audio track is choppy) (PB5,4)

ne and totem through aoss to see if ALSA was the problem. I got the same results, which isn't really conclusive as aoss is advertised as not being a magic bullet. Anyway, has anyone else got these problems? -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMA

Re: Permission for 'dev/pmu'

adn't clicked OK out of habit, and it didn't appear again! :-D Could it be that it's finally been fixed? I'm really happy! Many thanks to the person responsible! -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject

Re: Problems Playing Videos (audio track is choppy) (PB5,4)

'ello, Thanks to all who replied; I undid the prelinking and now mplayer works. It plays DVDs and videos OK. bye just now, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Finding non apt-managed files

to do this)? I would like to keep my system tidy and have been doing a lot of development work recently that I want to make sure hasn't put anything where it shouldn't. best regards, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECT

Re: Finding non apt-managed files

'ello, Thanks for the replies. I had heard of checkinstall before -- and always try to install to /usr/local -- but thanks for reminding me of it. I hadn't heard of cruft (the program :-)) before -- it looks like just the thing I'm looking for; thanks! best regards, -- Matt

benefits of apt-build for powerpc?

this would make as big a difference as the leap from i386 to k7 did. bye just now, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

CPU Frequency -- min save value?

bye just now, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Sound drivers for newer machines: need help

p support, for example, has been *incredibly* useful)! best regards, -- Matthew T. Atkinson <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

  1   2   >