id the project.
Michael Clow
<http://desiresailing.org/> Desire, C&C 32, Lake St. Clair
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rodrigo
Lequerica
Sent: Thursday, June 06, 2013 4:25 PM
To: cnc-list@cnc-list.com
Cc: cnc-list@cnc-list.com
Subject: Re: St
list if you
desire. Or perhaps some of you have had good experience with a particular
vendor of used winches.
Michael Clow mdc...@warmgear.com
Desire <http://desiresailing.org/> , C&C 32, Lake St. Clair
___
This List is provided
the toe rail back one. Kudos to C&C for pre-bending the toerail (not so for
a buddy with a Hunter 31).
http://desiresailing.org/Misc/C
<http://desiresailing.org/Misc/C&C32DeckHullJoint.pdf> &C32DeckHullJoint.pdf
Michael Clow
Desire <http://desiresailing.org/>
We had a similar problem with our 2GM15 and we removed the cable and
lubricated. Another major aspect was that the bracket holding the cable near
the transmission shift lever was not properly aligned. Once we did these two
things is was very smooth.
Michael Clow
<h
link.
Michael Clow
<http://desiresailing.org/> Desire, C&C 32, Lake St. Clair
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David
Knecht
Sent: Monday, September 09, 2013 9:56 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List 6 part mainsheet and also trav
Our modified 6 part mainsheet arrangement can be seen here:
http://desiresailing.org/CnC32MainSheetModification.pdf.
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Michael
Clow
Sent: Tuesday, September 10, 2013 9:29 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List 6
On my C&C 32 with a traveler in front of the companion way we have installed a
main sheet fine tuner horizontally along the boom. We could probably clean it
up a bit but it works great.
You can check it out at:
http://desiresailing.org/CnC32MainSheetModification.pdf
Michael
eFB13LowRes.pdf (1 MB)
http://desiresailing.org/Results/SailingMagC
<http://desiresailing.org/Results/SailingMagC&C32ArticleFB13.pdf>
&C32ArticleFB13.pdf (3 MB)
Michael Clow
Desire, C&C 32
Lake St. Clair
___
There is a simple solution, telescoping poles should be visibly marked so
competitors know the correct length is being used and front end crew knows
where to set pole length if it has been collapsed for storage.
Michael
Desire, C&C 32, Lake St. Clair
From: CnC-List [mailto:cnc-list-boun..
The problem with vinyl coated wire is that the coating hides any denigration of
the hidden wire. For the Port Huron to Mackinac Race the vinyl coated wire
life lines are grandfathered in but if a boat replaces the life lines it must
uncoated wire or the high tech cordage.
Michael Clow
I need an Autohelm/Raymarine ST50 Wind Transducer. Might anyone have one
they would be willing to sell? I have posted a picture online at
http://desiresailing.org/images/AutohelmST50WindSpeedTransducer.jpg.
Michael Clow
Desire <http://desiresailing.org/> , C&C 32, Lake
The Port Huron to Mackinac Race does not allow vinyl coated life lines when
replaced. Existing ones are grandfathered. The idea is that the vinyl
hides potential corrosion.
Michael Clow
TheYachtsman.Com <http://theyachtsman.com/>
Desire <http://desiresailing.org/&
/SailCertificateSymChute1998CnC32.pdf
There is no C&C 32-II. The C&C 32 (made 1979 to 1984) is actually 31.5 LOA.
The C&C99 is 32.5 feet and came out around 2000. The only similarity is that
they are within .5 feet of 32 feet.
Michael Clow
<http://desiresailing.org/> Desir
We did this project spring of 2013. I have summary diagram on my boat
website at: http://desiresailing.org/ToeRailJointDiagram.pdf
Michael Clow
<http://desiresailing.org/> Desire, C&C 32, Lake St. Clair
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Beha
Michael Clow
Desire <http://desiresailing.org/> , C&C 32, Lake St. Clair
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Kevin
Driscoll via CnC-List
Sent: Sunday, June 15, 2014 1:59 AM
To: cnc-list@cnc-list.com
Subject: Stus-List C&C 30 mkII prevente
the chute I make sure
it is at my back when I do the jibe which keeps it out of the way when
attaching the pole to the mast. We occasionally use it in light air going down
wind as a fraculator.
Michael Clow
<http://desiresailing.org/> Desire, C&C 32, Lake St. Clair
/products/cr-marine-products/spreader-boots
Michael Clow
Desire, C&C 32, Lake St. Clair
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Arnold
Griesel via CnC-List
Sent: Sunday, June 07, 2015 3:58 PM
To: cnc-list@cnc-list.com
Cc: Ar
need crew? Or
perhaps any tips on finding a ride? My wife and I are in our early 60's,
fit and experienced. We actively club race our C&C 32 in Metro Detroit on
Lake St. Clair.
Michael Clow
Desire <http://desiresailing.org/> , C&a
5 at 6:55 PM, Michael Clow via CnC-List
wrote:
Hello,
My wife and I will be in the Holland area Tuesday 7/28 through Thursday 7/30
and are interested in crewing on a boat (preferably a C&C) on all or any of
these days. It appears that there are races each evening out of MBYC, Bayshore
YC a
tch girl
C&C 36
Spring Lake, Mi
On Sun, Jul 5, 2015 at 6:55 PM, Michael Clow via CnC-List
wrote:
Hello,
My wife and I will be in the Holland area Tuesday 7/28 through Thursday 7/30
and are interested in crewing on a boat (preferably a C&C) on all or any of
these days. It appears
I use Sta-Set X 3/8” on my main halyard of my C&C 32 that I actively club race.
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of jtsails via
CnC-List
Sent: Monday, September 21, 2015 7:52 AM
To: cnc-list@cnc-list.com
Cc: jtsails
Subject: Re: Stus-List C&c 30 main halyard siz
I use Sta-Set X on jib and main halyards and StaSet on the spin halyards.
Michael Clow
Desire <http://desiresailing.org/> , C&C 32, Lake St. Clair
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
Jean-Francois J Rivard via CnC-List
Sent: Monday, Septembe
Another major benefit to a block and tackle setup on a split back stay is that
anyone can look aft and get a good idea of how much backstay tension is on the
rig. We periodically forget during short handed W/L races.
Michael Clow
<http://desiresailing.org/> Desire, C&C 32, Lake
do a lot of double
handed sailing so the running rigging is run back to the cockpit but is also
set up to be available at the mast too. I have a few photos on the layout
at: http://desiresailing.org/DeckSetUp.htm.
Where are you located and what kind of sailing do you plan to do?
Michael
I rebidded the aft half of my toe rail three years ago and the leaks stopped.
The link below show a diagram from C&C of my joint along with a few comments I
made after doing the job.
http://desiresailing.org/ToeRailJointDiagram.pdf
Michael Clow
Desire, C&C 32, Lake St. Clair
-
I just had my 2QM15 for my C&C 32 rebuilt over the winter and they did an
excellent job. We also had another club member Schooner Bay about 3 or 4 years
ago and he has been very happy too.
Michael Clow
Desire <http://desiresailing.org/> , C&C 32, Lake St. Clair
26 matches
Mail list logo
