This .pdf is a summary of what we did this past spring. We only did the back half of the boat on both sides as the front seemed to be fine. You should only do halt of the boat at a time. FYI, we were in our cradle with the mast down on the ground. The bolt holes lined up perfectly when we put the toe rail back one. Kudos to C&C for pre-bending the toerail (not so for a buddy with a Hunter 31).
http://desiresailing.org/Misc/C <http://desiresailing.org/Misc/C&C32DeckHullJoint.pdf> &C32DeckHullJoint.pdf Michael Clow Desire <http://desiresailing.org/> , C&C 32, Lake St. Clair From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of jarie...@aol.com Sent: Monday, August 26, 2013 10:35 AM To: cnc-list@cnc-list.com Subject: Stus-List recaulking toerails I need to recaulk the toerails on my 32' C&C. My thought is to remove the bolts, clean out all the old material between the underside of the deck and the rubrail and between the bottom of the toerail and the top of the deck. I would use Skiaflex to reseal these areas and Buytul tape for the bolt holes. Any thoughts, experiences? Jesse A. Rieber Witch of the Westmoreland 32' C&C, Cotuit, Cape Cod, MA
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
