Re: Stus-List A tribute to Doyle Sail Loft

Tequila makes my Keel fall off. Tim Toronto From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of John Pennie via CnC-List Sent: Thursday, August 21, 2014 9:00 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List A tribute to Doy

Re: Stus-List Engine stalling after shifting

Dave, I had similar drama with my engine six years ago. It was made worse by a cantankerous starter. I once had to have guests steer while I jumped below and shorted the starter solenoid contacts with a big screw driver to start it. (docking was similar to Jack Lemon in The Wackiest Ship In The

Re: Stus-List Engine stalling after shifting

Re: higher than spec rpm Just be careful. Shifting is "supposed" to be done at less than 1000rpm. Josh On Aug 22, 2014 7:58 AM, "Chuck S via CnC-List" wrote: > Dave, > I had similar drama with my engine six years ago. It was made worse by a > cantankerous starter. I once had to have guests st

Re: Stus-List Top rudder bushing

Dave, The 35/3 has a fiberglass tube without bearings. Just top and bottom nylon bushings. If there is play in the tube you can use epoxy to make a "bearing". The West website explains how. basically, wax the rudder shaft and pour epoxy down the rudder tube. Joel 35/3 On Thursday, August 21,

Re: Stus-List Stus-clevis pin

If push comes to shove a machine shop can make one for you. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Aug 21, 2014 1:47 PM, "Richard N. Bush via CnC-List" < cnc-list@cnc-list.com> wrote: > > I have run into an unusual problem; I lost a clevis pin from the lower > shroud, ("someone" d

Re: Stus-List Engine stalling after shifting

And the funny part ….. We are supposed to be sailors not mechanics! From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck S via CnC-List Sent: Friday, August 22, 2014 8:58 AM To: Joel Aronson; CNC boat owners, cnc-list Subject: Re: Stus-List Engine stalling after shiftin

Re: Stus-List A tribute to Doyle Sail Loft

Wait a minute! Your name is not Wally . From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tim Sippel via CnC-List Sent: Friday, August 22, 2014 8:52 AM To: John Pennie; cnc-list@cnc-list.com Subject: Re: Stus-List A tribute to Doyle Sail Loft Tequila makes my Keel fal

Re: Stus-List Top rudder bushing

Rich Knowles will likely chime in on this one. A fellow named Phil Walsh in Halifax (J120 Philharmonic – beautiful boat) I believe has made these in the past. I have heard they work well and is a cheaper way to go …. Mike Persistence 1987 Frers33 (Yeah – I know) From: CnC-List [mailto

Re: Stus-List A tribute to Doyle Sail Loft

Wow — too bad for Wal… :^) Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI On Aug 22, 2014, at 6:51 AM, Tim Sippel via CnC-List wrote: > Tequila makes my Keel fall off. > > Tim > Toronto ___ This List is provided

Re: Stus-List Top rudder bushing

True. Easy to make. Even on a wood lathe. Rich > On Aug 22, 2014, at 9:43, "Hoyt, Mike via CnC-List" > wrote: > > Rich Knowles will likely chime in on this one. A fellow named Phil Walsh in > Halifax (J120 Philharmonic – beautiful boat) I believe has made these in the > past. I have heard

Re: Stus-List Top rudder bushing

Strikes me that it might be easier to have a machine shop make a thin walled sleeve of delrin(?) with a flange that replicates the ring we now have. The sleeve would drop over the top of the post and take up the slack. Am I missing something? Presumably to do the West method the rudder has to

Re: Stus-List Top rudder bushing

Hello We made 2 top bearing washers (1 for my 39TM & 1 for my dock mate's 35 Mk1) out of a sheet of .25" Teflon sourced through McMaster Carr. It took all of about 15 minutes to produce the 2 and the 12" x 12" piece allowed each of us to have a spare washer as well. We completely rebuilt boat's st

Re: Stus-List Top rudder bushing

I have just had another thought on how to take out the "clunk" at least from the top of the rudder post - (I have never taken mine apart so would welcome any feedback as to why this would not work My top rudder assembly is made up of what appears to be 4 components 1) Aluminum base - with 4 bol

Re: Stus-List Top rudder bushing

I think Delrin, also called Acetal, is the material of choice for the bushings. http://www.aetnaplastics.com/products/d/Acetal I had a machine shop make up a selection of thicknesses from tube stock at a reasonable price - $80 for six pieces. I did take the rudder off, cleaned and checked it for

Re: Stus-List More animals on the bayou

I hope his heel will heal quickly ;-) Leslie Phoenix C&C32 On Thu, 8/21/14, Edward Levert via CnC-List wrote: Subject: Re: Stus-List More animals on the bayou To: "Bill Hoyne" , "cnc-list@cnc-list.com" Date: Thursday, August 21, 2014, 1:42

Re: Stus-List More animals on the bayou

The reason Dennis is enjoying life so much now is that he sent all their humidity up to the North Coast! Take it back! Bill Coleman C&C 39 -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Leslie Paal via CnC-List Sent: Friday, August 22, 2014 2:00 PM

Re: Stus-List C&C NE Rendezvous

Please stay tuned for dockage details...We will get them to you as soon as possible. When you combine a non-profit organization with a state-run park things can be a slower than I/we like. My Apologies to any Non-profit and/or state employees. David F. Risch 1981 40-2 (401) 419-4650 (cell)

Re: Stus-List Ever Have a Battery-Selector Switch Go Bad?

Edd, Until last weekend I would have said no. Then Spent about an hour checking everything because selector switches "never go bad" By process of elimination confirmed that it was the switch. I could initially get power on 2 or all, then only on 2. When I went to remove the lead

Re: Stus-List A tribute to Doyle Sail Loft

Doyle Huntington made me a #1 (155) last season. The transformation from the old #1 was amazing. The boat is close winded and fast. I can confirm that they know their stuff. Now if I could stop tacking into headers... Kirk Sneddon C&C Mk 29 Mk II From: CnC-List [mailto:cnc-list-boun...

Re: Stus-List Ever Have a Battery-Selector Switch Go Bad?

Kirk, Thanks. It was the weirdest thing and I thought it had to be the switch too. I have another Perko switch on board and can swap it (at least I hope so.) I’ll be out there tomorrow morning to investigate and repair. I was planning to do an overhaul of the main electrical o