drawing air it may prevent the pump from working even
if the other tanks is full.
Joe
Coquina
From: Peter McMinn via CnC-List
Sent: Monday, March 22, 2021 2:55 AM
To: cnc-list@cnc-list.com
Cc: petemcm...@gmail.com
Subject: [EXTERNAL] Stus-List water tanks interconnected, or not?
I have a 30gal
I have a 30gal water tank under both settees. The valves for each are set to
open flow. However, the pump seems to draw only from the starboard side. I’d
assumed that with both valves open, the tanks would equalize, but the stbd tank
empties and the pump goes dry, while the port tank remains ful
I don’t have the accumulator (yet). But it is on order.
Marek
From: Bill Coleman via CnC-List
Sent: Tuesday, July 10, 2018 10:30
To: cnc-list@cnc-list.com
Cc: Bill Coleman
Subject: Re: Stus-List Water tanks pressure pump
Is your accumulator tank waterlogged? You should get at least a cup of
y 09, 2018 10:49 PM
To: cnc-list@cnc-list.com
Cc: Marek Dziedzic
Subject: Re: Stus-List Water tanks pressure pump
If we are talking about the water pressure pump…
My pump works, but this season it started to work a bit differently. In the
past it provided a steady flow and usually shut down
retty tricky and I note that the manual is generally silent on
operations of these thing. Great idea marking the ends, I shall do that btw!
Cheers,
Maurice
Original Message
From: Chad Osmond via CnC-List
To: cnc-list
Cc: Chad Osmond
Sent: Tue, Jul 10, 2018 7:39 am
Subject: Re: Stus
Is this the black and orange 4 port manifold? If so, each side of the knobs
has either a round part or a pointed part at the end. The orientation is
vertically, with the pointed part up for open, or the rounded end for
closed.
If they're sideways it will not work.
I ended up removing mine to get
t; I would appreciate any suggestions.
>
>
>
> Thanks
>
>
>
> Marek
>
> 1994 C270 “Legato”
>
> Ottawa, ON
>
>
>
> *From:* CnC-List *On Behalf Of *Josh
> Muckley via CnC-List
> *Sent:* Monday, July 9, 2018 10:43
> *To:* C&C List
> *Cc:* J
Marek
1994 C270 “Legato”
Ottawa, ON
From: CnC-List On Behalf Of Josh Muckley via
CnC-List
Sent: Monday, July 9, 2018 10:43
To: C&C List
Cc: Josh Muckley
Subject: Re: Stus-List Water tanks pressure pump
Typically the water pumps are rubber diaphragm style with either one, two, or
three diaphr
Hi Maurice,
Congratulations on the new boat! We are in season 6 with our 30-2 and really
love the boat. Our water tank setup sounds simpler than yours, we have one
valve that opens one tank and closes the other. It’s locate
I, too, had trouble with the tank manifold when I got my boat. The pointy end
of the valve handle has to be in the proper orientation to select the tank. I
still have to look at the almost hidden label to determine which way that is. I
think the pointed end is toward the outlet of the manifold t
Typically the water pumps are rubber diaphragm style with either one, two,
or three diaphragms. There are often inlet and outlet check values as
well. The checks and diaphragms are rubber flappers that push/pull,
seat/unseat alternately as a drive motor runs. As the rubber gets old and
as gunk g
t@cnc-list.com Cc: mp...@aol.com Subject: Stus-List Water tanks pressure
pump
Hello,
As new owners of our C&C 30 mkii, we were out for a first weekend and had a
ball. Very comfortable and loads of fun on the water was our overall
appraisal! But we did run into a bit of a snag and I turn to the
p 20, 2017 10:00 pm
Subject: Re: Stus-List Water Tanks - now source for Kracor Tanks
I see that I did not specifically say it, but I called the 800 number
listed in the Kracor Catalog on Tuesday morning, and was told that
they only manufacture tanks for boat builders and that they had no
de
Nine
Louisville, Kentucky 40220-1462
502-584-7255
-Original Message-
From: Rick Brass via CnC-List
To: cnc-list
Cc: Rick Brass
Sent: Wed, Sep 20, 2017 10:00 pm
Subject: Re: Stus-List Water Tanks - now source for Kracor Tanks
I see that I did not specifically say it, but I called the 800 nu
idge Lane, Suite Nine
Louisville, Kentucky 40220-1462
502-584-7255
-Original Message-
From: Rick Brass via CnC-List
To: cnc-list
Cc: Rick Brass
Sent: Wed, Sep 20, 2017 10:00 pm
Subject: Re: Stus-List Water Tanks - now source for Kracor Tanks
I see that I did not specifically sa
] On Behalf Of Persuasion37
via CnC-List
Sent: Wednesday, September 20, 2017 7:35 AM
To: cnc-list@cnc-list.com
Cc: Persuasion37
Subject: Re: Stus-List Water Tanks - now source for Kracor Tanks
Kracor's catalogue.
https://www.kracor.com/support/holdingtanks.pdf
Mike
PERSUASION
C&a
My understanding is that Yamaha intends to supply boat builders and it's
own internal needs. Sounds as if they are out of the retail aftermarket.
Bill Bina
On 9/20/2017 1:54 PM, Jim Reinardy via CnC-List wrote:
There was a note in our local paper in June that Kracor had been sold
to Yamaha Ma
c-list.com wrote:
>
> Re: Stus-List Water Tanks - now source for Kracor Tanks
___
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.m
paid for a custom length.
>
> Robbie
>
> Sent from my iPad
>
> > On Sep 20, 2017, at 8:48 AM, cnc-list-requ...@cnc-list.com wrote:
> >
> > Re: Stus-List Water Tanks - now source for Kracor Tanks
>
> ___
>
> This lis
I ordered mine directly from Kracor, and even paid for a custom length.
Robbie
Sent from my iPad
> On Sep 20, 2017, at 8:48 AM, cnc-list-requ...@cnc-list.com wrote:
>
> Re: Stus-List Water Tanks - now source for Kracor Tanks
___
Thi
s via CnC-List
> To: cnc-list
> Cc: Rick Brass
> Sent: Tue, Sep 19, 2017 10:18 pm
> Subject: Stus-List Water Tanks - now source for Kracor Tanks
>
> Long story short: both of the water tanks on my 38 have cracks in the water
> fill fitting. The tanks are mold number 5060, a
7255
-Original Message-
From: Rick Brass via CnC-List
To: cnc-list
Cc: Rick Brass
Sent: Tue, Sep 19, 2017 10:18 pm
Subject: Stus-List Water Tanks - now source for Kracor Tanks
Long story short: both of the water tanks on my 38 have cracks in the water
fill fitting. The tanks are mold nu
Long story short: both of the water tanks on my 38 have cracks in the water
fill fitting. The tanks are mold number 5060, and model number 75330 (which
I presume indicates the location of the vent, fill, and drain fittings.
The cracks radiate out from the threaded fitting. The Kracor catalog sa
t owners, cnc-list"
To: "CNC boat owners, cnc-list"
Sent: Tuesday, June 17, 2014 3:58:11 PM
Subject: Stus-List Water tanks
Hi all,
This may seem like a trivial question but I just took ownership of a 1974 33
three quarter tonner. Going through the boat for the first time I
] On Behalf Of Edd
Schillay via CnC-List
Sent: Tuesday, June 17, 2014 4:04 PM
To: CNC boat owners, cnc-list
Subject: Re: Stus-List Water tanks
Burt,
Congrats on the purchase of your C&C!
I used to have a 1978 C&C 34, which, I believe, is very similar
to
Burt,
Congrats on the purchase of your C&C!
I used to have a 1978 C&C 34, which, I believe, is very similar to your
33. There were two water tanks — one on port, one on starboard, both under the
seating.
All the best,
Edd
Edd M. Schillay
Sta
Hi all,
This may seem like a trivial question but I just took ownership of a 1974 33
three quarter tonner. Going through the boat for the first time I found that
there is no water tank but it seems like there was one at some time. There
is a water fill on the deck connected to nothing and a sma
Richard
My 35-3 does have 2 water tanks- the large one (28 gals) is under the
starboard settee(your settee is to port?) and the smaller (14 gals is) is
under the Dinette outboard on the port side. There is a manifold to switch
between -(looks like gardenia outdoor watering stuff) and the water pu
m
Subject: Re: Stus-List water tanks.
Dwight,
The high number I quote pertains only to cruisers who make passages or
who stay aboard for a long period of time.
With regard to folks who do weekends aboard or a 2 week coastwise
cruise - I'm sure many of them still do the bottled thing - but as
k when on board other boats. Usually that
> comes from sealed cans or bottles so it has not really been a big concern
> so
> far.
>
> And Cheers to you too
> Dwight
>
> -Original Message-
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Colin
>
..@cnc-list.com] On Behalf Of Colin
Kilgour
Sent: November 9, 2012 7:11 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List water tanks.
Dwight,
You wondered how many folks use their on board tanks for potable water.
I say almost 100% of all cruisers. Anything else is just impractical.
And like R
.com] On Behalf Of Rich
Knowles
Sent: November 9, 2012 5:13 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List water tanks.
I've been running water, javex, soap solution through every fall, followed
by a good rinse and then plumbing alcohol. Rinse through thoroughly in the
spring and add a ha
.
-Original Message-
From: Colin Kilgour
Sent: Friday, November 09, 2012 6:10 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List water tanks.
Dwight,
You wondered how many folks use their on board tanks for potable water.
I say almost 100% of all cruisers. Anything else is just imp
Sent: November 9, 2012 5:13 PM
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List water tanks.
>
> I've been running water, javex, soap solution through every fall, followed
> by a good rinse and then plumbing alcohol. Rinse through thoroughly in the
> spring and add a half
:cnc-list-boun...@cnc-list.com] On Behalf Of dwight veinot
Sent: Friday, November 09, 2012 12:31 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List water tanks.
How do you clean the lines leading from the tank(s) to the faucets...doesn't
the same crud that accumulates on the tank walls also a
javex would
probably take care of that but…taste counts too!
Dwight Veinot
C&C 35 MKII, Alianna
Head of St. Margaret's Bay, NS
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rich Knowles
Sent: November 9, 2012 5:13 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List wa
wles
Sent: November 9, 2012 5:13 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List water tanks.
I've been running water, javex, soap solution through every fall, followed
by a good rinse and then plumbing alcohol. Rinse through thoroughly in the
spring and add a half cup of javex to each tan
: November 9, 2012 5:06 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List water tanks.
Hi Dwight,
I still have hand pumps, no pressure system, so I shop vac because it's
expedient (or I'm lazy... depends who is part of the conversation :).
Our tanks are potable water and no matter
teeth.
Dwight Veinot
C&C 35 MKII, Alianna
Head of St. Margaret's Bay, NS
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Russ & Melody
Sent: November 9, 2012 3:53 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List water tanks.
For water tank cleaning I like a stro
ottle water for drinking, cooking and brushing teeth.
Dwight Veinot
C&C 35 MKII, Alianna
Head of St. Margaret's Bay, NS
--
From: CnC-List
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Russ & Melody
Sent: November 9, 2012 3:53 PM
To: cnc-list@cnc-list.com
Subject: Re:
oking and brushing teeth.
Dwight Veinot
C&C 35 MKII, Alianna
Head of St. Margaret's Bay, NS
--
*From:* CnC-List
[mailto:cnc-list-boun...@cnc-list.com]
*On Behalf Of *Russ & Melody
*Sent:* November 9, 2012 3:53 PM
*To:* cnc-list@cnc-list.com
*Subje
&
Melody
Sent: November 9, 2012 3:53 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List water tanks.
For water tank cleaning I like a strong bleach solution, say 1/2 cup to
gallon of warm water (125mL -> 4 Litres).
* pour solution into tank and swish/rub all surfaces with cloth
For water tank cleaning I like a strong bleach solution, say 1/2 cup
to gallon of warm water (125mL -> 4 Litres).
* pour solution into tank and swish/rub all surfaces with cloth or brush
* let soak 5 - 10 minutes and repeat a number of times (while
doing other things)
* remove bleach
KIII
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com]On Behalf Of bev
parslow
Sent: Friday, November 09, 2012 1:54 PM
To: cnc-list@cnc-list.com
Subject: Stus-List water tanks.
What is the best way to clean them. I have access through hat
What is the best way to clean them. I have access through hatches.
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
45 matches
Mail list logo
