you wrote:
Hole saws! Way too obvious! Why was 1/4 inch too thick? Looks like you
had plenty of room.
1/4 would have worked, but at the time the steering wasn't in and I
wanted to leave myself some room to fiddle. To align the steering
cables just right with the quadrant, it's easiest to m
Wally,
Hole saws! Way too obvious! Why was 1/4 inch too thick? Looks like you
had plenty of room.
Joel
On Mon, Aug 18, 2014 at 11:02 AM, Wally Bryant via CnC-List <
cnc-list@cnc-list.com> wrote:
> Jake wrote:
>
>> I think Wally made some or had some made. McMaster has a wide
>> variety of
Jake wrote:
I think Wally made some or had some made. McMaster has a wide variety of
plastics. Delerin would be my first choice of material.
Charlie said something about two pegs riding on the bearing, which is
different than my setup. I have the 'donut' with two set screws.
But Delrin w
see him when we are there. Contact me
if you have any questions …..
Paul Fountain
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Charlie
Normand via CnC-List
Sent: Sunday, August 17, 2014 12:25 PM
To: cnc-list@cnc-list.com
Subject: Stus-List top rudder post washer
Aft
Mistress”
C&C 35 Mk-III
Hampton VA
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Charlie
Normand via CnC-List
Sent: Sunday, August 17, 2014 12:25 PM
To: cnc-list@cnc-list.com
Subject: Stus-List top rudder post washer
After a beautiful sail yesterday in Narragan
Done this
Will do a post with how when we are Back home enjoying a sail for a change
Paul. :)
> On Aug 17, 2014, at 12:24 PM, "Charlie Normand via CnC-List"
> wrote:
>
> After a beautiful sail yesterday in Narragansett Bay by Fort Adams (site of
> this year's NE Rendezvous - still room to
After a beautiful sail yesterday in Narragansett Bay by Fort Adams (site of
this year's NE Rendezvous - still room to sign up..), I noticed that a
piece of the white teflon (?) plastic ring around the rudder post had come
off. It is located under the helm seat hump and the 2 horizontal pegs that
