Thanks, Tim and Neil for your help addressing my wheel pilot problem.
Neil's manual was the correct one for the 4000+. My actuator didn't have
the ball bearings that Tim described. Once I got the actuator off the
wheel and opened it, I found a bad belt.. A new belt from eBay for $22
fixed the pro
I had mine apart late last year and was successful in replacing the clutch
lever and clutch eccentric, getting it back together, and operational.
Symptoms were "catching" sound in the until and no positive "feel" for
whether it was engaged or disengaged. The wheel didn't hang up but a couple
dozen
Has anyone on the list taken the Wheel Pilot Actuator apart? On the way to
the starting line last week, the steering was catching on something inside
the Wheel Pilot Actuator, I opted to not race for fear that the steering
would lock up during the race. Previous to this happening, the clutch
leve
If you haven't already, try cleaning the contacts on the control head. My
old ST4000 started acting up and this fixed it.
Eric
C&C 34/36
On Thu, Aug 4, 2016 at 7:42 PM, Bill Coleman via CnC-List <
cnc-list@cnc-list.com> wrote:
> I have a peculiar problem, My ST4000+ display no longer displays my
I have a peculiar problem, My ST4000+ display no longer displays my rudder
indicator, altho it still seems to be wired in ok.
Also, my heading was locked in at 243 degrees. This makes my little boat on
the chart plotter point to 243 degrees, and I cannot use the autopilot. When I
try that, it
:cnc-list-boun...@cnc-list.com] On Behalf Of Russ &
Melody via CnC-List
Sent: Sunday, July 10, 2016 8:05 PM
To: cnc-list@cnc-list.com
Cc: Russ & Melody
Subject: Re: Stus-List ST4000+ WheelPilot heading Calibration
Maybe you have one set to true wind and the other set for apparent wind...
angles corrected. . .
Bill Coleman
C&C 39
Original message
From: Rick Brass via CnC-List
Subject: Re: Stus-List ST4000+ WheelPilot heading Calibration
Is it possible that your GPS is set to show True heading, while the fluxgate
is showing Magnetic? Ten degrees west variatio
Rick Brass
Subject: Re: Stus-List ST4000+ WheelPilot heading Calibration
Is it possible that your GPS is set to show True heading, while the fluxgate
is showing Magnetic? Ten degrees west variation is probably about right,
depending on where you are in PA.
Rick Brass
Washington
/16 8:55 PM (GMT-05:00)
To: cnc-list@cnc-list.com
Cc: Rick Brass
Subject: Re: Stus-List ST4000+ WheelPilot heading Calibration
Is it possible that your GPS is set to show True heading, while the fluxgate
is showing Magnetic? Ten degrees west variation is probably about right,
depending on whe
Behalf Of Bill
Coleman via CnC-List
Sent: Saturday, July 09, 2016 3:07 PM
To: cnc-list@cnc-list.com
Cc: Bill Coleman
Subject: Stus-List ST4000+ WheelPilot heading Calibration
I have just done my turns to calibrate my fluxgate, and when I correct it
down 10 degrees to agree with my GPS heading
I have just done my turns to calibrate my fluxgate, and when I correct it
down 10 degrees to agree with my GPS heading shown on my i70 Display, that
heading drops 10 degrees. So between the two of them, I am always 10 degrees
off. I think I am now around 40 degrees low, by the time I figured what w
list-boun...@cnc-list.com] On Behalf Of Curtis
> Sent: May 10, 2013 10:18 AM
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List ST4000 Fluxgate dile in
>
> This helps a great deal.
>
>
> It always helps to have a manule. However my control head dont look
> like th
cnc-list-boun...@cnc-list.com] On Behalf Of Curtis
> Sent: May 10, 2013 8:31 AM
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List ST4000 Fluxgate dile in
>
> Thanks will clean the wires and hook them back up. Do you know where I
> can get the proceedures on how to do the circle t
n Behalf Of Curtis
> Sent: May 10, 2013 8:31 AM
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List ST4000 Fluxgate dile in
>
> Thanks will clean the wires and hook them back up. Do you know where I
> can get the proceedures on how to do the circle thing?
>
> On 5/10/1
age-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Curtis
Sent: May 10, 2013 8:31 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List ST4000 Fluxgate dile in
Thanks will clean the wires and hook them back up. Do you know where I
can get the proceedures on how to do the circ
Suggest reading the manual to get best use of the unit. If you do not have a
manual see
http://www.raymarine.com/view/?id=5694
Rich Knowles
Indigo. LF38
Halifax
On 2013-05-10, at 8:05, Curtis wrote:
Can I dile in the fluxgate compass usint the control head for the st4000?
Or what is the the 3
-list.com
Subject: Re: Stus-List ST4000 Fluxgate dile in
Curtis
I believe what you are describing as "dial in" is called a deviation check
on the fluxgate compass. You need to do very slow circles (counter
clockwise works for me) and if you go too fast that will be displayed and
you will
ections to improve things.
>
> Dwight Veinot
> C&C 35 MKII, Alianna
> Head of St. Margaret's Bay, NS
>
>
> -Original Message-
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Curtis
> Sent: May 10, 2013 8:05 AM
> To: CnC-List@cnc-list
d use some electrical
contact cleaner on the connections to improve things.
Dwight Veinot
C&C 35 MKII, Alianna
Head of St. Margaret's Bay, NS
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Curtis
Sent: May 10, 2013 8:05 AM
To: CnC-List@cnc-list.com
Can I dile in the fluxgate compass usint the control head for the st4000?
Or what is the the 3 circle procedure for this process? It is the
first time I have tried to use the auto helm st4000. When I put it on
auto, it holds the course just fine its just reading like 209 degrees
when the boat is ti
t of my sailing
between Halifax and Shelburne.
Dwight Veinot
C&C 35 MKII, Alianna
Head of St. Margaret's Bay, NS
_
From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com]
On Behalf Of Tortuga
Sent: September 13, 2012 8:45 AM
To: cnc-list@cnc-list.com
Subje
ndfills.
Derek Kennedy
Tortuga (1979 C&C 30 Mk1)
Ballantyne's Cove, NS
From: cnc-list-boun...@cnc-list.com
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C.
Sent: Wednesday, September 12, 2012 2:29 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List ST4000 wheel drive prob
Hi Derek,
Don't get rid of the LCD control unit if that is still working. You can buy a
new wheel on ebay as another lister mentioned. That's because when the LCD
drive unit fails, you have to buy a new wheel, new fluxgate compass, new LCD
monitor (which requires a bigger hole) and a "compute
Wednesday, September 12, 2012 2:29 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List ST4000 wheel drive problem
Monitor eBay. The drive units show up regularly. I sold one a few months
ago. Won't be cheap.
Dennis C.
Sent from my iPhone
On Sep 12, 2012, at 9:52 AM, Tortuga wrote:
Monitor eBay. The drive units show up regularly. I sold one a few months ago.
Won't be cheap.
Dennis C.
Sent from my iPhone
On Sep 12, 2012, at 9:52 AM, Tortuga wrote:
> During our last sail, the wheel drive for the Autohelm ST4000 on our 1979 30
> mk1 stopped engaging. When I moved the dr
There is a chance that CMC will help you. Ask to speak to Joey. He has lots of
used stuff lying around.
Rich
On 2012-09-12, at 10:52, Tortuga wrote:
During our last sail, the wheel drive for the Autohelm ST4000 on our 1979 30
mk1 stopped engaging. When I moved the drive lever into the engag
: Re: Stus-List ST4000 wheel drive problem
Had same problem this summer. Culprit are 1/16 inch diameter roller pins.
Can't remember length. Ace hardware carried them. Also Fastenal stores carry.
Hope yhis helps.
Bill Walker
36
Evening Star.
- Reply message -
From: "Tortuga"
...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com]
On Behalf Of Tortuga
Sent: Wednesday, September 12, 2012 9:53 AM
To: cnc-list@cnc-list.com
Subject: Stus-List ST4000 wheel drive problem
During our last sail, the wheel drive for the Autohelm ST4000 on our 1979 30
mk1 stopped engaging. When I
Had same problem this summer. Culprit are 1/16 inch diameter roller pins.
Can't remember length. Ace hardware carried them. Also Fastenal stores carry.
Hope yhis helps.
Bill Walker
36
Evening Star.
- Reply message -
From: "Tortuga"
To:
Subject: Stus-List ST4000 whee
29 matches
Mail list logo
