boun...@cnc-list.com] On Behalf Of John and
Maryann Read
Sent: Wednesday, November 20, 2013 8:01 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Muffler
The stainless muffler has finally given up the ghost. It is 6 ¼ round, 2
inch side inlet and 1 ½ inch top outlet, 9 inches high and the base
: Wednesday, November 20, 2013 9:14 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Muffler
John:
I replaced the SS muffler this past Spring.don't remember the exact
measurements put similar to yours.
I replaced it with a Vernalift resin mufflerslightly bigger (2" higher)
muffler bu
ooled down by
the water in the mixer/muffler. Thus the volume is reduced.
Dennis C.
>
> From: John and Maryann Read
>To: cnc-list@cnc-list.com
>Sent: Wednesday, November 20, 2013 7:00 AM
>Subject: Stus-List Muffler
>
>
>
>The s
John:
I replaced the SS muffler this past Spring.don't remember the exact
measurements put similar to yours.
I replaced it with a Vernalift resin mufflerslightly bigger (2"
higher) muffler but with the same 2" inlet and 1 1/2" outlet. I will try
to find my receipt which will have the
.8611 x4824 : : fax: 419.861.3299
[http://www.metzgers.com/misc/EmailSig.jpg]<http://www.metzgers.com/social-media>
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of John and
Maryann Read
Sent: Wednesday, November 20, 2013 8:01 AM
To: cnc-list@cnc-list.com
Subject: Stus-
The stainless muffler has finally given up the ghost. It is 6 ¼ round, 2
inch side inlet and 1 ½ inch top outlet, 9 inches high and the base is 7
inches square. Any suggested sources?? Vernalift by Centek Industries
makes a close copy but the outlet is 2 inch. On a related note, any
thoughts on
t.com] On Behalf Of Robert
Abbott
Sent: Tuesday, October 23, 2012 11:27 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Muffler
Just curious, does anyone know the 'life expectancy' of the metal water
muffler(s) on our boats (realizing that a fresh water vs a salt water
environment may
Looking at the numbers here it is pretty random, I don't think you can
put a best before date on it... mine is a year older than yours and is
original.
Graham Collins
Secret Plans
C&C 35-III #11
On 23/10/2012 11:26 AM, Robert Abbott wrote:
Just curious, does anyone know the 'life expectancy
Mine is original to the boat 1978 but has always been in Fresh water
On 23/10/2012 11:26 AM, Robert Abbott wrote:
Just curious, does anyone know the 'life expectancy' of the metal
water muffler(s) on our boats (realizing that a fresh water vs a salt
water environment may be a factor)?
Bob Abbo
No, it had been used on my Perkins 107
Bill Coleman
C&C 39 animated_favicon1
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick
Brass
Sent: Tuesday, October 23, 2012 3:40 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Muffler
Bill, was this the muffler fo
Sold!
Paypal?
Joe Della Barba
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Coleman
Sent: Tuesday, October 23, 2012 3:40 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Muffler
23# To a commercial address, say, Castle Harbor Marina, would be 14.04.
Residential to
cnc-list@cnc-list.com
Subject: Re: Stus-List Muffler
How much to ship?
Joe Della Barba
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill
Coleman
Sent: Tuesday, October 23, 2012 2:46 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Muffler
I have an Onan Aqua
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Muffler
I have an Onan Aqualift steel, White enamel coated. I removed from my boat
on repowering as it was too small. I will send it for shipping cost if
anyone wants it, it is 12 diameter, 12 high, 1 ½ NPT IN on the side
with a nipple there
How much to ship?
Joe Della Barba
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Coleman
Sent: Tuesday, October 23, 2012 2:46 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Muffler
I have an Onan Aqualift steel, White enamel coated. I removed from my boat on
1 ½ ID Hose, but could be anything. Appears to be in nice shape.
Bill Coleman
C&C 39 animated_favicon1
-Original message-
From: Robert Abbott
To: cnc-list@cnc-list.com
Sent: Tue, Oct 23, 2012 15:26:42 GMT+00:00
Subject: Stus-List Muffler
Just curious, does anyone
I have a boat from the same year as you and replaced my muffler with a
fibreglass one three years ago...
Tim
Mojito
C&C 35-3
Branford, CT
On Tue, Oct 23, 2012 at 11:26 AM, Robert Abbott wrote:
> Just curious, does anyone know the 'life expectancy' of the metal water
> muffler(s) on our boats (re
lto:cnc-list-boun...@cnc-list.com] On Behalf Of Robert
> Abbott
> Sent: Tuesday, October 23, 2012 11:27 AM
> To: cnc-list@cnc-list.com
> Subject: Stus-List Muffler
>
> Just curious, does anyone know the 'life expectancy' of the metal water
> muffler(s) on our boats (
glass when I
am ready to replace it.
John
Arpeggio
C&C 32 - 84
Norwalk Ct
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robert
Abbott
Sent: Tuesday, October 23, 2012 11:27 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Muffler
Just curious, do
Just curious, does anyone know the 'life expectancy' of the metal water
muffler(s) on our boats (realizing that a fresh water vs a salt water
environment may be a factor)?
Bob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
___
This List is provided by the C
19 matches
Mail list logo
