well I thought that but the steaming light is a regular traditional type...I
think it is WAY to dim as it barely has a glow...
-- Original Message --
From: Jim Watts
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Electrical issues up the mast...
Date: Fri, 17 Aug 2012 07:43:25
My Davis light came with two bulbs, one bright and one dim. Any chance you
have one of each installed in those lights?
On 16 August 2012 10:44, djhaug...@juno.com wrote:
> Okay so, Lolita is being VERY high maintenance!
>
> I installed new lights up the mast. I put a mega light at the top,
to get
launched
-- Original Message --
From: Eric Frank
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Electrical issues up the mast
Date: Thu, 16 Aug 2012 22:25:31 -0400
Danny, How did you do this test? "old wires" from a battery to the light, so
not using th
Danny,
How did you do this test? "old wires" from a battery to the light, so not using
the wires in the mast? If so, then since the light is also dim now, my guess
would be that the old wires were fine and the problem is in the light itself.
Maybe in the socket or in the connections of the wi
fonctoids.
Time to make the 4 hour drive to the boat for the weekend!!!
Dennis C.
Touche' 35-1 #83
Mandeville, LA
From: Martin DeYoung
To: "cnc-list@cnc-list.com"
Sent: Thursday, August 16, 2012 4:23 PM
Subject: Re: Stus-List Electrical issues up the mast...
You know something though.
fonctoids.
Time to make the 4 hour drive to the boat for the weekend!!!
Dennis C.
Touche' 35-1 #83
Mandeville, LA
From: Martin DeYoung
To: "cnc-list@cnc-list.com"
Sent: Thursday, August 16, 2012 4:23 PM
Subject: Re: Stus-List Electrical issues up the mast...
You know something th
cnc-list.com"
Sent: Thursday, August 16, 2012 4:23 PM
Subject: Re: Stus-List Electrical issues up the mast...
You know something though...I tied a knot in the wire so it wouldn't pull into
the mast...that shouldn't do anything though, should it?
A loose knot would not add signif
: Thursday, August 16, 2012 2:54 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Electrical issues up the mast...
Oh, no. A knot? That will result in a hydrocoidal spin in the neutralos.
That, in turn, will cause an icolastic backflow of the angrafads which may
invert the dissacromal fonctoids
e, LA
>
> From: Martin DeYoung
>To: "cnc-list@cnc-list.com"
>Sent: Thursday, August 16, 2012 4:23 PM
>Subject: Re: Stus-List Electrical issues up the mast...
>
>
>
>You know something though...I tied a knot in the wire
lf Of djhaug...@juno.com
Sent: Thursday, August 16, 2012 1:22 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Electrical issues up the mast...
you know, I did test before hand. The mast head light worked as it should but
the steaming deck light was dim as it is nowI thought, "
t 16, 2012 1:22 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Electrical issues up the mast...
you know, I did test before hand. The mast head light worked as it should but
the steaming deck light was dim as it is nowI thought, "well it is lighting
and it must be this old wi
run a
heavier ground to that block from the bonding wire? However, I don't think
that is the issue...
-- Original Message --
From: Joel Aronson
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Electrical issues up the mast...
Date: Thu, 16 Aug 2012 16:30:38 -0400
Don&
something though...I tied a knot in the wire so it wouldn't pull
> into the mast...that shouldn't do anything though, should it?
>
> I got the idea from the old wire I replaced...
>
>
>
>
> -- Original Message ------
> From: Stevan Plavsa
> To
n Plavsa
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Electrical issues up the mast...
Date: Thu, 16 Aug 2012 15:36:09 -0400
Do you know what the draw is?
There is a neato chart
here:http://www.postaudio.net/webserver/marinewiring.htmlRemember, 20 feet of
double cable is a 40 foot circuit
hooked upagaineven if that were so, it shouln't really matter,
>> right. All the negs go to the same place essentially...
>>
>>
>> -- Original Message --
>> From: "Marek Dziedzic"
>> To:
>> Subject: Re: Stus-List
ek Dziedzic"
> To:
> Subject: Re: Stus-List Electrical issues up the mast...
> Date: Thu, 16 Aug 2012 15:17:46 -0400
>
> Is it possible (considering that two lights are dim) that you connected
> them in series? I know that it sounds too simple, but it is a consideration.
>
gaineven if that were so, it shouln't really matter,
> right. All the negs go to the same place essentially...
>
>
> -- Original Message ------
> From: "Marek Dziedzic"
> To:
> Subject: Re: Stus-List Electrical issues up the mast...
> Date:
e pos from one and the neg
from the other hooked upagaineven if that were so, it shouln't really
matter, right. All the negs go to the same place essentially...
-- Original Message --
From: "Marek Dziedzic"
To:
Subject: Re: Stus-List Electrical issues up
Is it possible (considering that two lights are dim) that you connected them in
series? I know that it sounds too simple, but it is a consideration.
Marek
C&C 24 Fennel___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-Lis
_
From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On
Behalf Of djhaug...@juno.com
Sent: Thursday, August 16, 2012 10:45 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Electrical issues up the mast...
Okay so, Lolita is being VERY high maintenance!
I installed
Electrical issues up the mast...
Date: Thu, 16 Aug 2012 18:18:14 +
it isn't a spreader light. It is a megalight for a deck light and a
traditional steaming light, and the run is just half way up, like 20'
-- Original Message --
From: Stevan Plavsa
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Electrical issues up the mast...
Dat
list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On
Behalf Of Stevan Plavsa
Sent: Thursday, August 16, 2012 1:02 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Electrical issues up the mast...
Yeah, I had crappy lamp cord going up my mast to the steaming/deck light, I
replaced
Yeah, I had crappy lamp cord going up my mast to the steaming/deck light, I
replaced that too. I was surprised to see it in there to be honest, I
thought C&C was better than that. I guess they did cut some corners.
Steve
C&C 32
On Thu, Aug 16, 2012 at 2:00 PM, Stevan Plavsa wrote:
> Going up the
Going up the mast?
I put new 14/2 wiring up my mast while it was horizontal on saw horses this
spring before stepping. And THAT was a pain in the ass! I would hate to do
that job from a bosun's chair 40 feet above the deck, no thanks. If you
have conduit in your mast it makes things a lot easier, i
exits at the cabin top inside the cabin
-- Original Message --
From: Joel Aronson
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Electrical issues up the mast...
Date: Thu, 16 Aug 2012 13:51:46 -0400
Women! �What did you expect?
Use the handheld and sail during daylight
oun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On
Behalf Of djhaug...@juno.com
Sent: Thursday, August 16, 2012 12:45 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Electrical issues up the mast...
Okay so, Lolita is being VERY high maintenance!
I installed new lights up the mast. I
Women! What did you expect?
Use the handheld and sail during daylight.
Does the wire exit at the base of the mast or cabin top? Crushed at exit
point?
Wish I had more constructive ideas.
On Thu, Aug 16, 2012 at 1:44 PM, djhaug...@juno.com wrote:
> Okay so, Lolita is being VERY high maintenance
Okay so, Lolita is being VERY high maintenance! I installed new lights up the
mast. I put a mega light at the top, I used another megalight as a deck light
and installed a new steaming light. I don't know what happened but, I think
something in the mast let go. There is some downward pressure
29 matches
Mail list logo
