Is angrafads correct? I usually spell it angrafarads.
Cheers, Russ
At 02:54 PM 16/08/2012, you wrote:
Oh, no. A knot? That will result in a hydrocoidal spin in the
neutralos. That, in turn, will cause an icolastic backflow of the
angrafads which may invert the dissacromal fonctoids.
Time to make the 4 hour drive to the boat for the weekend!!!
Dennis C.
Touche' 35-1 #83
Mandeville, LA
From: Martin DeYoung <mdeyo...@deyoungmfg.com>
To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
Sent: Thursday, August 16, 2012 4:23 PM
Subject: Re: Stus-List Electrical issues up the mast...
You know something though...I tied a knot in the wire so it wouldn't
pull into the mast...that shouldn't do anything though, should it?
A loose knot would not add significantly to the resistance however a
knot may increase the chance of fouling on other cables or halyards.
A #10 ground back to your main ground terminal should be OK for the
lighting loads. How are the older connections along that run?
Martin
Calypso
----------
From: cnc-list-boun...@cnc-list.com
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of djhaug...@juno.com
Sent: Thursday, August 16, 2012 1:22 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Electrical issues up the mast...
you know, I did test before hand. The mast head light worked as it
should but the steaming deck light was dim as it is now....I
thought, "well it is lighting and it must be this old wire I'm using
to connect the battery to the leads sticking out of the mast that is
junk. Man, I'm glad i ran those new wires..."
You know something though...I tied a knot in the wire so it wouldn't
pull into the mast...that shouldn't do anything though, should it?
I got the idea from the old wire I replaced...
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
