From: "dwight veinot via CnC-List"
To: cnc-l...@cnc-list.coms
Cc: "dwight"
Sent: Tuesday, September 29, 2015 10:32:28 PM
Subject: Re: Stus-List Balsa core thickness
Chuck,
why do you have these samples...what happened...I can't imagine you cut out
samples just t
have samples from these areas.
>
>
> Chuck
> Resolute
> 1990 C&C 34R
> Broad Creek, Magothy River, Md
>
> --
> *From: *"Martin DeYoung via CnC-List" *Cc: *"Martin DeYoung"
> *Sent: *Monday, September 28, 20
Resolute
1990 C&C 34R
Broad Creek, Magothy River, Md
- Original Message -
From: "Martin DeYoung via CnC-List"
Sent: Monday, September 28, 2015 1:35:45 PM
Subject: Re: Stus-List Balsa core thickness
On Calypso, built in 1970 at Bruckmann's, the deck balsa is no
I'd echo the recommendation to *not* use expandable foam in a core
repair. The characteristics of the material may seem similar to
end-grain balsa but crush resistance is very different, and additionally
it is difficult to get thicknesses, densities and full-surface bonding
"right".
As an alterna
pso's deck.
>
>
>
> Martin
>
> Calypso
>
> 1971 C&C 43
>
> Seattle
> --
> *From:* CnC-List [cnc-list-boun...@cnc-list.com] on behalf of Petar
> Horvatic via CnC-List [cnc-list@cnc-list.com]
> *Sent:* Monday, September 28,
o
1971 C&C 43
Seattle
From: CnC-List [cnc-list-boun...@cnc-list.com] on behalf of Petar Horvatic via
CnC-List [cnc-list@cnc-list.com]
Sent: Monday, September 28, 2015 12:27 PM
To: cnc-list@cnc-list.com
Cc: Petar Horvatic
Subject: Re: Stus-List Balsa core thickness
I’ll measure befor
you would be able
> to verify that C&C did not use different thicknesses in newer
> designs/builds.
>
>
>
> Martin
>
> Calypso
>
> 1971 C&C 43
>
> Seattle
> --
>
> *From:* CnC-List [cnc-list-boun...@cnc-list.com] on b
Sent: Monday, September 28, 2015 2:52 PM
To: cnc-list@cnc-list.com
Cc: Andrew Burton
Subject: Re: Stus-List Balsa core thickness
On my 1981 C&C 40, the core thickness is 3/4". When I installed the windlass I
found the centerline, where a staysail track was, has plywood reinforcement
t; *From:* CnC-List [cnc-list-boun...@cnc-list.com] on behalf of Rick Brass
> via CnC-List [cnc-list@cnc-list.com]
> *Sent:* Monday, September 28, 2015 7:28 AM
> *To:* cnc-list@cnc-list.com
> *Cc:* Rick Brass
> *Subject:* Re: Stus-List Balsa core thickness
>
> Petar;
>
-list.com]
Sent: Monday, September 28, 2015 7:28 AM
To: cnc-list@cnc-list.com
Cc: Rick Brass
Subject: Re: Stus-List Balsa core thickness
Petar;
If I recall correctly, it is about 3/8” – perhaps ½”
Rick Brass
Imzadi C&C 38 mk 2
la Belle Aurore C&C 25 mk1
Washington, NC
From: CnC-List [mailt
To: CNC boat owners, cnc-list
Cc: phorvati .
Subject: Stus-List Balsa core thickness
Does anyone know what the thickness of balsa core is along the geona track
section of deck on 1976 C&C 38 Mk2
Petar
___
Email address:
CnC-List@cnc-list.c
Does anyone know what the thickness of balsa core is along the geona track
section of deck on 1976 C&C 38 Mk2
Petar
___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://
12 matches
Mail list logo
