On my 1981 C&C 40, the core thickness is 3/4". When I installed the windlass I found the centerline, where a staysail track was, has plywood reinforcement about 3" wide.
Andy C&C 40 Peregrine On Mon, Sep 28, 2015 at 1:35 PM, Martin DeYoung via CnC-List < cnc-list@cnc-list.com> wrote: > On Calypso, built in 1970 at Bruckmann's, the deck balsa is nominally > 1/2". When replacing failed balsa I have been purchasing 1/2" then sanding > it down a little to leave room for epoxy and filler and the new epoxy/glass > laminations. > > > > If you remove a fastener in the general area of the deck you would be able > to verify that C&C did not use different thicknesses in newer > designs/builds. > > > > Martin > > Calypso > > 1971 C&C 43 > > Seattle > ------------------------------ > *From:* CnC-List [cnc-list-boun...@cnc-list.com] on behalf of Rick Brass > via CnC-List [cnc-list@cnc-list.com] > *Sent:* Monday, September 28, 2015 7:28 AM > *To:* cnc-list@cnc-list.com > *Cc:* Rick Brass > *Subject:* Re: Stus-List Balsa core thickness > > Petar; > > > > If I recall correctly, it is about 3/8” – perhaps ½” > > > > Rick Brass > > *Imzadi *C&C 38 mk 2 > > *la Belle Aurore *C&C 25 mk1 > > Washington, NC > > > > > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of > *phorvati > . via CnC-List > *Sent:* Saturday, September 26, 2015 8:01 PM > *To:* CNC boat owners, cnc-list <cnc-list@cnc-list.com> > *Cc:* phorvati . <phorv...@gmail.com> > *Subject:* Stus-List Balsa core thickness > > > > Does anyone know what the thickness of balsa core is along the geona track > section of deck on 1976 C&C 38 Mk2 > > Petar > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > -- Andrew Burton 61 W Narragansett Ave Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ phone +401 965 5260
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
