Chuck, why do you have these samples...what happened...I can't imagine you cut out samples just to learn the thickness
Dwight Veinot C&C 35 MKII, *Alianna* Head of St. Margaret's Bay, NS d.ve...@bellaliant.net On Tue, Sep 29, 2015 at 11:11 PM, Chuck S via CnC-List < cnc-list@cnc-list.com> wrote: > FWIW, the balsa on my 1990 34R is 3/4" thick on deck and the hull. All > vertical walls of cockpit and coachroof and transom are solid laminate, w > no core. The fiberglass unit that covers the companionway slides and > moonroof has 3/8" balsa. I have samples from these areas. > > > Chuck > Resolute > 1990 C&C 34R > Broad Creek, Magothy River, Md > > ------------------------------ > *From: *"Martin DeYoung via CnC-List" <cnc-list@cnc-list.comrtical > *Cc: *"Martin DeYoung" <mdeyo...@deyoungmfg.com> > *Sent: *Monday, September 28, 2015 1:35:45 PM > > *Subject: *Re: Stus-List Balsa core thickness > > On Calypso, built in 1970 at Bruckmann's, the deck balsa is nominally > 1/2". When replacing failed balsa I have been purchasing 1/2" then sanding > it down a little to leave room for epoxy and filler and the new epoxy/glass > laminations. > > > > If you remove a fastener in the general area of the deck you would be able > to verify that C&C did not use different thicknesses in newer > designs/builds. > > > > Martin > > Calypso > > 1971 C&C 43 > > Seattle > ------------------------------ > *From:* CnC-List [cnc-list-boun...@cnc-list.com] on behalf of Rick Brass > via CnC-List [cnc-list@cnc-list.com] > *Sent:* Monday, September 28, 2015 7:28 AM > *To:* cnc-list@cnc-list.com > *Cc:* Rick Brass > *Subject:* Re: Stus-List Balsa core thickness > > > Petar; > > > > If I recall correctly, it is about 3/8” – perhaps ½” > > > > Rick Brass > > *Imzadi *C&C 38 mk 2 > > *la Belle Aurore *C&C 25 mk1 > > Washington, NC > > > > > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of > *phorvati > . via CnC-List > *Sent:* Saturday, September 26, 2015 8:01 PM > *To:* CNC boat owners, cnc-list <cnc-list@cnc-list.com> > *Cc:* phorvati . <phorv...@gmail.com> > *Subject:* Stus-List Balsa core thickness > > > > Does anyone know what the thickness of balsa core is along the geona track > section of deck on 1976 C&C 38 Mk2 > > Petar > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
