26, 2013 10:25 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Replacing Spreaders and Standing Rigging
Remove the rods, coil them to no LESS than 200 times rod diameter, cable tie
them to an "X" made from 2 x 4's and UPS them (insured) to Florida Rigging and
Hydraulic
ennis C.
Touche' 35-1 #83
Mandeville, LA
>
> From: David Folsom
>To: cnc-list@cnc-list.com
>Sent: Saturday, January 26, 2013 8:01 PM
>Subject: Re: Stus-List Replacing Spreaders and Standing Rigging
>
>
>Rick and Lee, thanks for th
Rick and Lee, thanks for the info.
I replaced my forestay about 3 years ago when I installed a roller furler.
I am waiting on prices for replacing the shrouds- and based on price will
pick between rod and wire.
the rigger recomended going with wire for the backstay as a simple way to
save some m
In the summer of 2010, we fell off a 4 ft wave while close reaching in 16
knots true, and something went POP. Sounded like a .22 going off; and I said
"F***! Something broke!"
One of the jump stays between the first and second spreaders, which I later
learned is officially called the D2 shroud,
Dave,I recently did a complete check of my rod rigging while I had the mast out
for repaint. I presume you have rod? Its a little complex disassembling the
furler .If you have a Harken Mk 1,I have a diagram (exploded view} and assembly
description if you need it. The biggest issue is with dye c
I bought replacement spreaders from South Shore Yachts.
Wal
David Folsom wrote:
Does anyone know of a source for replacement spreaders?
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
Oh and they can replicate your rigging if you ship your current set to them. I
understand a lot of people have had good luck with them.I have no affiliation
with them what-so-ever. I have been to their shop though. If you were to
start the process now, you should have plenty of time to get i
I just did my standing rigging last year with a local guy.
http://www.riggingonly.com/ is a good source for hardware maybe they would have
some spreaders for you...
-- Original Message --
From: David Folsom
To: cnc-list@cnc-list.com
Subject: Stus-List Replacing Spreaders and St
