oss-1.0.17
alsa-utils-1.0.21
How do I unmute 'mono' in the latest version of ALSA, or am I being
really dumb?
Many thanks in advance.
Dan
--
Come build with us! The BlackBerry(R) Developer Conference in SF,
I have fixed my own issue, by adding
options snd-hda-intel model=basic
to the end of /etc/modprobe.d/alsa-base
Many thanks
Dan
On Wed, 2009-10-28 at 11:18 +, Dan wrote:
> afternoon,
>
> I have just compiled and installed the latest version of ALSA. I have
> a Sony UX1XN
obe.d/sound
10. modprobe snd-hda-intel
11. system-config-soundcard - This failed
12. reboot Sound works!
Does anyone have any suggestions to get my sound working?
Regards,
Dan
-
This SF.net email is sponsored by: Splunk In
Rafael,
I'm not sure I'm looking in the right place, but everything
in this directory has a current time stamp except
/lib/modules/2.6.22.4-65.fc7/kernel/sound/soundcore.ko
soundcore.ko sounds important, could this be my problem?
Dan
On Thursday 06 September 2007, Rafael Roquetto wro
,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
soundcore 9633 2 snd
[EMAIL PROTECTED] ~]$
Does anyone have any suggestions?
Dan
-
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log
d enough
information.
Many thanks,
Dan Halson
---
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver
higher performing products faster, at low TCO.
http:/
nly occurs
when i'm using dmix.
Hope this helps shed a little more light on the subject, maybe someone else
has experienced something similar?
Dan
On Thursday 06 May 2004 17:49, dan wrote:
> Hello,
>
> I'm trying to set up my M-Audio Delta 66 using the alsa drivers (ice1712
y i can't be of more help.
Dan
On Tuesday 18 May 2004 21:43, Radoslaw "AstralStorm" Szkodzinski wrote:
> More information:
>
> It is not connected with mmap, only dmix.
>
> I've uncovered another problem, one can't connect
TO
option, command
#cat sound > /dev/dsp
produce noises..
I understand that I must specify 'dd' options before recording or use
some other device..
What's wrong?
Are there another way of recording? Alsa-HOWTO says too liltle
found in google so far has made any change. The computer isn't
even outputting the "red light".
So I think Intel HDA Audio is still aways away.
Dan
On Mon, Dec 22, 2008 at 11:15 AM, Julien Claassen wrote:
> Hello!
> I know there have been many of them. But a friend of m
rnels snd-rtctimer is no
longer available (due to the RTC API update) and there is no other way
to get a high resolution ALSA timer.
Thanks,
Dan Muresan
--
This SF.net email is sponsored by:
SourcForge Community
Source
here courtesy of the Turtle Beach hack.
The register setup is outlined in the datasheet (I found it here:
http://pdf1.alldatasheet.net/datasheet-pdf/view/158787/CMEDIA/CM106-L+.html)
on page 21.
The key is to set b15 in register 0x02 so that we can ge
s - I guess I'm still in 32-bit land here.
If I do get my hands on some 64-bit hardware (maybe at work) I'll test out
my change, but in the meantime, would someone else be kind enough to verify
that this is indeed not necessary on 64-bit Linux and that my change doesn't
break anything?
ese are nice little USB sound cards, and since they're so cheap on eBay,
I'm sure we'll see more and more people needing support for them.
---Dan
On Fri, May 22, 2009 at 2:18 PM, Fabrício Nihues
wrote:
> Hello Dan,
>
> I've tested the optical connection to my receiver a
Okay, well, if SPDIF out didn't work with the settings I sent out, then I
really don't know what else to do for it since I'm only stabbing in the dark
here.
Besides, everything I'm reading seems to imply that the optical out is only
2-channel stereo anyway on most of these "budget" chips and they o
Just FYI, I've submitted the patch and Takashi says it'll make it in with
the next merge.
Thanks for all the help.
---Dan
On Tue, May 26, 2009 at 10:49 PM, Fabrício Nihues wrote:
> Dan, everything works, I think was the test sample (a .wav Dolby
> Digital sample) that I
0
HDA Intel, ALC888 Digital
IEC958 (S/PDIF) Digital Audio Output
null
Discard all samples (playback) or generate zero samples (capture)
Thanks!
Dan
--
Download Intel® Parallel Studio Eval
Try the new softw
CS4630 problem but nothing has happened yet.
> P.S. What about Yamaha/Intel 753 chip that is found in the Toshiba
> Satellite 5005's?
All yamaha 75x should be supported with the alsa 'ymfpci' driver.
-Dan
--
[-] Omae no subete no kichi wa ore no mono da. [-]
___
r to utilize it.
> *There is JACK project which has a huge potential but none of its
> effects are again universal, nor backwards-compatible with already
> released software.
> *There is Gstreamer, but I do not honestly know enough about it.
Then make them better.
-Dan
--
[-] Omae
concise solution, rather than a dozen
> half-working ones?
Because the different projects have different (and sometimes mutually
incompatible) goals.
-Dan
--
[-] Omae no subete no kichi wa ore no mono da. [-]
___
Alsa-user mailing
On Tue, 19 Mar 2002, Maren Peasley wrote:
> So, if I were to do so, what information would be needed?
The complete datasheets, not the abbreviated useless ones on their
website.
-Dan
--
[-] Omae no subete no kichi wa ore no mono da. [-]
___
A
ailed
--
any ideas?
thanks,
dan
___
Don't miss the 2002 Sprint PCS Application Developer's Conference
August 25-28 in Las Vegas -- http://devcon.sprintpcs.co
another
output?
Many Thanks,
Dan
__
Do You Yahoo!?
Everything you'll ever need on one web page
from News and Sport to Email and Music Charts
http://uk.my.yahoo.com
___
Don't
t the
sound card connected up? what do i put in
/etc/sysconfig/soundcard? or whatever.
> You might also try asking stuff on the linux-thinkpad mailing
> list -- They have lots of experience in dealing with thinkpads:
> [EMAIL PROTECTED]
this is my next step.
thanks.
dan
j.
Hello all
I've been trying for about a week now to get cmipci to output 5.1 sound.
In xine or mplayer I get very bassy distortion. 2 speakers work fine,
as does the mirrored rear speaker setting in the mixer, but I'd like
more than that. Help would be greatly apprec
:
http://sourceforge.net/mailarchive/message.php?msg_id=1471546
that suggested there is a problem with the buffer size, but running
/test/pcm with different -b values did not solve the problem. Some help
would be greatly appreciated.
~Dan
Here is a # cat /proc/asound/card0/cmicpi
while running # pcm
ther. I
suggest contacing Takashi Iwai ([EMAIL PROTECTED]) since he is the cmipci
driver maintainer, but he hasn't replied to me yet either. Good Luck!
Dan Pierce
---
This sf.net email is sponsored by: To learn the basics of securing
y
Konsti,
I believe I was using bios 2aa3, but I upgraded to 2aa5 and I'm
listening to music as I write this. Perhaps an irq issue, or some other
resource. I don't know what else to tell you except maybe a faulty
sound chip. Wish I could help more.
Dan Pierce
Konstantin Klets
ported
in Linux yet, but I'm just curious if anyone has kludged it into
working or perhaps if anyone might be looking into adding support
for it at some point.
Thanks!
Dan
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heav
Dan Hopper <[EMAIL PROTECTED]> remarked:
> Hi,
>
> I recently was tossed a new motherboard at work, an Epox EP-8RDA+.
> The product blurb is at:
> http://www.epox.com/html/motherboard.asp?product=EP-8RDAplus&lang=1
>
> Athlon Socket A motherboard, Nvidia
Hi Carl,
Carl Hartshorn <[EMAIL PROTECTED]> remarked:
> I can answer my own question. While browsing the archives re: A7N8X, I tripped
> over a mail from Dan who had a similar question about a nForce2 support for a
> Epox EP-8RDA+ MB.
>
> The lspci output was identical
ck only mode, which should solve the problem.
echo quake3 0 0 disable > /proc/asound/card0/pcm0c/oss
echo quake3.x86 0 0 disable > /proc/asound/card0/pcm0c/oss
-Dan
--
[-] Omae no subete no kichi wa ore no mono da. [-]
---
This SF.net ema
ew usb card, how do I play
cdaudio via it? I'm using a laptop and presumably the cd drive connects
straight to the laptop's internal sound card, which I've had quite enough of.
How can I go around that?
Thanks,
- --
Dan Armak
Gentoo Linux developer (KDE)
Matan, Israel
Public GPG k
On Thu, 5 Jun 2003, Takashi Iwai wrote:
> At Wed, 4 Jun 2003 11:48:40 -0700 (PDT),
> Dan Hollis wrote:
> > Is it possible to capture program's output (eg realplayer) with arecord
> > on trident or ymfpci?
> several possibilities:
> - no perfect quality but easy:
from the Synths correctly first.
Thanks in advance! Any help would be greatly appreciated!
Kind Regards,
Dan
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
thr
ink. However, I'm beginning to think that this
package needs something "higher level" to work. I know that Ubuntu and
Debian install PulseAudio by default and am wondering if I need that
layer to produce my sound.
I will be grateful for any information, suggestions or directions.
ilable for others who may
want to take this approach.
Thanks in advance for your help! If there are any further questions, please
let me know!
Kind Regards,
Dan
--
___
Alsa-us
On Wed, Nov 5, 2014 at 4:21 AM, Clemens Ladisch
wrote:
> Dan Swain wrote:
> > /FX-bus - the EMU10K2 chip has an effect bus containing 64 accumulators.
> > Each of the synthesizer voices can feed its output to these
> accumulators
> > and the DSP microcon
on me, so my experiments ended, and I'll have to
re-initialise the DSP :-)
Is there anyone on this mailing list who is 'fluent' with the emu10k1
patches, and modifying them?
Thanks,
Dan
On Wed, Nov 5, 2014 at 6:24 AM, Dan Swain wrote:
> On Wed, Nov 5, 2014 at 4:21 AM, Clemen
ro.
Below is a test application which illustrates this issue on my setup, it
takes the ALSA device as its argument and I am linking against the latest
stable alsa (1.0.29).
Any help with this would be much appreciated.
-Dan
---
#include
snd_pcm_t *handle;
int getFramesReady()
{
int
ce ID: 0x
Misc
Module: unknown
So ALSA must not be loading the driver. How can I fix this?
Thanks,
Dan
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll ge
On 12/30/06 9:12 AM, ael wrote:
Dan Star wrote:
Hi,
I bought the Roland/Edirol UA-1EX for a Compaq nx9010 laptop based on
the ALSA list that it is fully supported. However I can't get it to
work. Here are some details (keep in mind I am a newbie):
Installed
On 1/1/07 7:37 AM, ael wrote:
Dan Star wrote:
On 12/30/06 9:12 AM, ael wrote:
Dan Star wrote:
Hi,
I bought the Roland/Edirol UA-1EX for a Compaq nx9010 laptop based on
the ALSA list that it is fully supported. However I can't get
Has anyone gotten sound working on a Gateway mx6454 laptop or similar
model? It shows up as an ATI when it is a SigmaTel. I try to configure
using yast and it says it failed due to possible IRQ conflict. I also
was getting an error during boot: linux kernel: ALSA
sound/pci/hda/hda_codec.c:212: hda_
rk, but
> this
> will likely have latency issues, so I'd rather get a USB 2.0 card.
>
> Any advice or information welcome.
>
> Regards,
>
> Gareth
>
>
I suggest you check http://www.alsa-project.org/alsa-doc/. The
Roland/Edirol UA-1EX is listed as suppor
io at
start up and does not "clean them up".
3 - Why does ACPI disable the built-in sound card's interrupt?
Am I on the right track? Maybe someone can help me...
Thanks,
Dan
-
Take Surveys. Earn Cash. I
On 1/15/07 11:02 PM, Rich Shepard wrote:
> On Mon, 15 Jan 2007, Dan Star wrote:
>
>> What video format are you trying to play? A proprietary one?
>
> Dan,
>
> I don't think so. It's whatever is used on www.reuters.com (the news
> site). A couple of years ag
Has anyone gotten sound working on a Gateway mx6454 laptop or similar
model? It shows up as an ATI when it is a SigmaTel. I try to configure
using yast and it says it failed due to possible IRQ conflict. I also
was getting an error during boot: linux kernel: ALSA
sound/pci/hda/hda_codec.c:212: hda_
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
I'm a Gentoo user who recently upgraded my alsa-driver package via the
newest portage update over the weekend. After the update, I have a had
a number of trouble with alsa. I can no longer start, stop, or restart
the alsasound service via the
Is it possible to capture program's output (eg realplayer) with arecord
on trident or ymfpci?
-Dan
--
[-] Omae no subete no kichi wa ore no mono da. [-]
---
This SF.net email is sponsored by: Etnus, makers of TotalView, The best
t
asound/card0/pcm0c/oss
This works for me, for return to castle wolfenstein:
echo wolf 0 0 disable > /proc/asound/card0/pcm0c/oss
echo wolf.x86 0 0 disable > /proc/asound/card0/pcm0c/oss
I can then use teamspeak and rtcw at the same time. It works really well
too.
-Dan
--
[
1 root audio 14, 4 Jan 1
1970 audio
crw-rw1 root audio 14, 20 Jan 1
1970 audio1
crw---1 dan audio 14, 10 Jan 1
1970 dmfm
crw---1 dan audio 14, 9 Jan 1
1970 dmmidi
crw-rw1 root audio 14, 3 Jan 1
1970
--- Clemens Ladisch <[EMAIL PROTECTED]> wrote:
> Dan Garton wrote:
> > I have been trying to use the snd-usb-audio ALSA
> > driver to capture sound from the built-in
> microphone
> > on my webcam:
> > Bus 001 Device 002: ID 046d:0850 Logitech, Inc.
> Quic
n't mind getting my hands dirty in a bit of code,
by the way, if that's the quickest way to get the mic
working under ALSA. Due to time constraints though I
could do with a quick pointer or two to get me
started.
Thanks
Dan
--- Dan Garton <[EMAIL PROTECTED]> wrote:
>
>
--- Clemens Ladisch <[EMAIL PROTECTED]> wrote:
> Dan Garton wrote:
> > --- Clemens Ladisch <[EMAIL PROTECTED]> wrote:
> > > Dan Garton wrote:
> > > > # modprobe snd-usb-audio
> > > > ALSA ../alsa-kernel/usb/usbaudio.c:1980:
> 2:2:0 :
>
ol
__read_lock_failed
/lib/modules/2.4.20-8/kernel/sound/acore/snd.o: unresolved symbol
schedule_work
/lib/modules/2.4.20-8/kernel/sound/acore/snd.o: insmod
/lib/modules/2.4.20-8/kernel/sound/acore/snd.o failed
/lib/modules/2.4.20-8/kernel/sound/acore/snd.o: insmod snd-cs4
On Sun, 7 Sep 2003, David Fries wrote:
> Is there a sound loader for the wavetable on this card?
trident has no wavetable.
-Dan
--
[-] Omae no subete no kichi wa ore no mono da. [-]
---
This sf.net email is sponsored by:ThinkGeek
Welcome
On Wed, 10 Sep 2003, David Fries wrote:
> Is this a lack of someone writing the driver or a lack of the hardware
> having enough hardware to support a MIDI wavetable?
basically someone has to write a softsynth that uses the trident
wavetable.
-Dan
--
[-] Omae no subete no kichi wa ore n
ever much interest since timidity can do a decent
job.
-Dan
--
[-] Omae no subete no kichi wa ore no mono da. [-]
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_
oc/asound/card0/pcm0c/oss
echo quake3.x86 0 0 disable > /proc/asound/card0/pcm0c/oss
-Dan
--
[-] Omae no subete no kichi wa ore no mono da. [-]
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
can record. To be clear:
> - OSS application A writes to /dev/dsp
> - asoundrc routes and/or duplicates A's stream to a file or too a
> virtual pcm devices (say pcm.oss_capture) which can be opened
> by a recording application B.
; to work properly.
forward his emails to [EMAIL PROTECTED], since that's his ISP and he's abusing
his TOS.
-Dan
--
[-] Omae no subete no kichi wa ore no mono da. [-]
---
This SF.net email is sponsored by: SF.net Giveback Prog
I have no "captureable" device in my alsamixer display, does anyone have a
clue why? (i did a google on revolution + alsa + capture and wasnt
successful).
thanks
Dan
---
This SF.net email is sponsored by: SF.net Giveback Pro
terminology or mixer
technology so I might be missing something really obvious. Please let me
know if there is any other information I could provide that would help you
help me!
Thanks,
Dan Nephin
e-Radio Inc.
[EMAIL PROTECTED]
---
This SF.net
Hi,
I'm trying to use snd-usb-audio from alsa-driver
1.0.0_rc1 (compiled on Gentoo) to read from the USB
mic built into my Logitech Quickcam Web webcam.
The mic seems to be active:
[EMAIL PROTECTED] dan $ amixer -c 1
Simple mixer control 'Mic',0
Capabilities: cvolume cswitch
t/
It's much more straightforward than bugzilla, far more powerful than
sourceforge, much much easier to use, and very easy to install.
-Dan
---
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools De
ories.
This is probably the strongest argument, the rest are rubbish imho :-)
Another possibility would be to create gateway between bugzilla and
mantis... but that would take some coding.
-Dan
---
The SF.Net email is sponsored by Ecl
pository for ALSA would be nice.
Users could submit working configs for known difficult hardware, and a
search interface would allow lookups.
Something like http://www.qbik.ch/usb/devices/ or
http://www.linux1394.org/hcl.php but with ALSA tailored inform
t worked
under Win95/98 back when I had that OS.
Is there other output from dmesg or /proc that would be helpful?
Thank you very much!!!
-Dan
# ls -l /dev/sndstat
crw--- 1 root root 14, 6 Feb 23 16:02 /dev/sndstat
# chmod a+rw /dev/dsp /dev/mixer /dev/sequencer /dev/midi
chmod: cannot access
kinda drop off after telling
you to run alsamixer.
tia
-Dan
--
___
Get your free email from http://www.iname.com
---
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial pres
I got sound! But it's quiet. If I set the PCM level in alsamixer to 70% then I need
to crank the speaker volume. If I set the PCM level to 100% then it's better, but is
it OK to have this in the red (above 70%)? Kinda noisy in here right now, so I can't
really tell if it sounds degraded...
I seem to be having a unique issue getting the sound to work on my
laptop. Everywhere on the internet I see that people with this laptop
have gotten the sound to work with no modifications. My problem is
this: I install alsa-lib, alsa-utils and alsa-driver either from the
source on sourceforg
FWIW, Gentoo and the kernel devs claim that this problem is fixed in
the 2.6.6 kernel, but in order to get sound, I have to disable acpi by
passing acpi=off pci=noacpi to the kernel at boot time. Im happy to
have finally gotten sound to work. Now I need to tweak things so I
can have my custom
tl_elem_info_t *info)
snd_kcontrol replaces snd_kcontrol_t. Looks like there are no references
to snd_kcontrol_t anywhere in the new kernel's source tree so this is
probably a simple global change but i thought i'd mention it.
help!
thanks,
danno
--
Dan Pritts, System Administrator
Inter
tParameters,
outputParameters, sampleRate, framesPerBuffer, &inputLatency,
&outputLatency, &hostBufferSizeMode )' failed in
'pa_linux_alsa/pa_linux_alsa.c', line: 1775
Also, KRecorder doesn't work. I would
On 12/18/06 11:36 PM, Lee Revell wrote:
On Mon, 2006-12-18 at 23:13 -0600, Dan Star wrote:
have a Compaq nx9010 laptop with built in Southbridge Audio.
Because
it has a flaky head phone jack and the line-in recording quality was
bad
I bought a SB Audigy 2 ZS PC Card. The SB
I have a built in Southbridge Chip in my nx9010 laptop and a Audigy 2 ZS
PC Card. How do I tell applications/alsa which card to use?
Thanks,
Dan
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net&#
, I would
be happy to take any length contract you might have from a few days (or
even hours) on up.
If you would be interested in considering some sort of an arrangement like
this, please let me know and I will forward you a copy of my resume.
Regards,
Dan Twyman
er MP).
Any Trident NX or YMF744 card should do.
-Dan
--
[-] Omae no subete no kichi wa ore no mono da. [-]
___
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
arding the Audiophile 2496
BTW, I also have a AudioPCI card in the machine and in all the versions
of alsa mentioned about, it works perfectly. So I have no trouble
getting sound out of my machine, just out of the Audiophile 2496.
Thanks,
DanZ
--
*
eze the
machine and envy24control will freeze the machine without any controls
or windows coming up. aplay -l will show a device for the card, but any
attempt to play will freeze the machine.
--
* Dan Zaharevitz
* Camp Springs, MD
* [EMAIL PROTECTED]
On Mon, 10 Dec 2001, Brendon Greve wrote:
> Hi, I've got a KT133 chipset which as u prob know has an integrated
Remove microsoft windows from your system and install linux. Then we will
be able to help you.
-Dan
--
[-] Omae no subete no kichi wa ore no
e power switch when trying to debug.
--
* Dan Zaharevitz
* Camp Springs, MD
* [EMAIL PROTECTED]
Breakpoint 1, get_control (handle=0x805b0f0, id=0xb560,
top=0x8050080) at alsactl.c:170
170
err = snd_ctl_elem_read(handle, ctl);
(gdb) print *handle
$1 = {name = 0x8050050
Jaroslav Kysela wrote:
> On Sun, 16 Dec 2001, Dan Zaharevitz wrote:
>
>
[...]
description of the problem deleted
>
> Oops, it seems that there is missing unlock for the I2C bus spinlock.
> Could you try the latest CVS sources or this patch?
&g
On Wed, 19 Dec 2001, freaky child wrote:
> when i use aplay i get nothing but really loud static,
> I type aplay /root/mp3z/* and it starts with an mp3
> and says 8000hz mono, how do i get rid of this noise?
> and get the music to play correctly
afaik aplay doesn't play mp3 file
uot;modprobe
snd-card-sb16" or "modprobe snd-sb16".
I've also made and made/installed the modules again. I'm not sure where to go
from here - i assume i'm doing something wrong.
Dan Frost
__
Do You Yahoo!?
Everything you&
Alsa-0.9beta10 from Debian unstable. Thanks.
DMAN PCI is cs4614, as my midiman contact told me (and as usenet posts
confirm). cs4222 is merely a 20-bit adc/dac.
-Dan
--
[-] Omae no subete no kichi wa ore no mono da. [-]
___
Alsa-user mailing l
On Thu, 10 Jan 2002, ÀÌ⿱ wrote:
> Content-Type: text/html; charset="ks_c_5601-1987"
Jaroslav, can we make the mailing list reject such mails? I can't think of
any legitimate reason for anyone to send BIG5/JIS/EUC-TW/etc to the list.
-Dan
--
[-] Omae no subete no kichi
On Thu, 10 Jan 2002, Jaroslav Kysela wrote:
> On Wed, 9 Jan 2002, Dan Hollis wrote:
> I can modify the regex filter for the mailing list, so if someone sends me
> this filter, I'll update the mailing list configuration.
This should work for procmail, i've no idea about exim
On Tue, 5 Feb 2002, Paul Davis wrote:
> i have had this problem from time to time as well. i am still, after 2
> years of working with the hammerfall, unsure of what causes it.
Could it be a PCI problem? Latency timer issue? Busmastering problem?
-Dan
--
[-] Omae no subete no kichi wa
resources for this that i don't know about or have
overlooked?
Many thanks,
Dan
--- Thomas Hauth <[EMAIL PROTECTED]> wrote: > Hi !
> I have some problems configuring alsa. I'm using a Hercules Gamesurround
> Fortissimo II with a CS4236 chip. After starting the tool a
okay. However, when I attempt to play
> sounds using aplay or adjust levels using alsamixer, my machine
> freezes and I must do a hard power off. :^(
>
> Browsing the list archives, I found that Dan Zaharevitz was having
> a similar problem. Jaroslav Kysela r
n a number of ways
according to the documentation.
Yet, the only thing that i get out of any sound app is: "Can't open /dev/dsp!"
Does anybody have any ideas? It's driving me nuts!
.-- - - - -
| Dan "frosty" M.
| Telenetworkputerologist
| Fus
/dev/dsp exists, and is a symlink to /dev/dsp0
/dev/dsp0 also exists, and has "crw-rw-rw-" as it's permissions.
fro.
On May 16, 2002 05:25 pm, Michael Carmack wrote:
> On Thu, May 16, 2002 at 02:55:59PM -0500, Dan frosty M. wrote:
> > Each of the 0.9.0rc1 packages
vice]
Wow, i bet that won't format nicely without fixed-width.. in any case, i did
*not* compile alsa with legacy OSS support. I don't know if that would help
at all, however, i'm going to give it a shot anyways.
Thanks for the help so far!
.-- - - - -
| Dan "
t; hurts to look. :)
Ah, the problem is not with ALSA. The problem is that i'm a retard, got it.
In the future, i will always remember to hit the "M" key. :-) Thanks for the
tip. Everything works now. Finally i can block out the office with beats
and overused samples again.
at do I need to do???
Hope someone can help!!
yours with no music to keep me company at work :-(
Dan
Daniel James White PhD.
Cell Biology
Department of Biological and Environmental Science
University of Jyväskylä
FIN-40351
Jyväskylä
Finland
[EMAIL PROTECTED]
http://www.chalkie.org.uk
-3/ , and I think my sound support is turned on, how exactly do I check that??? Modprobe or something
Hope you have a few ideas as to why ./configure cant see my compiled driver .....??!
Cheers
Dan
P.S.
the thing i got from the realtek site was just a 0.5 alsa driver or something with
say I need to edit modutils
but I can't see this file, what did you mean??
exactly what should I put where.?
do i need to edit my /etc/modules.conf
if so what needs to be in there. I don't understand the instructions in the drivers directory INSTALL file
c
Frank, Takashi Mark van D, et al.,
Mark, how much sound are you getting? Just CD (like me) or can you
hear noises from gnome and mp3s from xmms My software is
generating sound information as seen in the graphics in xmms and
gnome sound monitor panel applet, but nothing except cd sound come
1 - 100 of 106 matches
Mail list logo
