Thanks for the reply, below are the outputs from Amixer, still don't work.
The two categories of controls intrigues me:
"Controls : 6Simple ctrls : 1"
fili@debian:~$ amixer -c 1
Simple mixer control 'Power LED',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
I'm not familiar with the card, but try amixer (and it's man page). A
Pinebook Pro has similar strangeness but loading an asound.state file
and doing alsactl restore gets it working. With this there are
multiple controls affecting the main input, they all need to be turned
up.
Mixer programs con
I have problems configuring audio gain on line level input. This line
level input works but at a very low level requiring more than 5vpp to full
scale.
Now I am using Debian 10 on a Thinkpad T430U. All information will be
appreciated, have no luck searching on google.
Excuse me for the horrible
Hi, after upgrading alsa-lib and alsa-utils to 1.1.8, Master, Headphones
and Speaker in AlsaMixer are stuck at -8 percentage. Adjusting attempts
immediately set max volume, still showing -8. Muting and unmuting work
fine. PCM control is not affected. Realtek ALC283, vanilla 4.20.0
kernel. Attac
Hi, I'm facing an assert while trying to start alsamixer on emulated
terminal, xterm or gnome-terminal. On tty works
Here is:
[geckos@archlinux ~]$ alsamixer
alsamixer: hcontrol.c:574: snd_hctl_load: Assertion
`list_empty(&hctl->elems)' failed.
Aborted
What that means?
I'm on archlinux, this h
Oh, I post a wrong output about cards...
$ cat /proc/asound/cards;
0 [V8237 ]: VIA8237 - VIA 8237
VIA 8237 with CMI9761A+ at 0xe400, irq 22
1 [SX ]: USB-Audio - Sound Blaster Digital Music SX
Creative Technology Ltd. Sound Blaste
Hi,
In Ubuntu Japanese Community forum, I help the person who cannot set the
PCM output volume of USB device with amixer or alsamixer.
https://forums.ubuntulinux.jp/viewtopic.php?id=11984&p=1
He can get PCM output (2 channels) from the device but cannot set their
volume correctly. I adviced him t
The business of where the alsamixer-reported items come from has
puzzled me for a while.
Over the past two and a half years I've been running ubuntu on an HP
tx2100 pavilion notebook.
I've had to compile alsa after each ubuntu upgrade or kernel change.
And with exaxtly the same hardware I've not ha
On 05/02/11 18:33, Bill Unruh wrote:
> On Sat, 5 Feb 2011, Torquil Macdonald Sørensen wrote:
>
>> Hi!
>>
>> On my Asus X5DID laptop I have an internal microphone, a "mic in", as
>> well as a
>> "line out", and of course internal speakers. The sound card is:
>>
>> tmac@asus ~$ lspci -s 02:00.1 -v
>>
On Sat, 5 Feb 2011, Torquil Macdonald Sørensen wrote:
Hi!
On my Asus X5DID laptop I have an internal microphone, a "mic in", as well as a
"line out", and of course internal speakers. The sound card is:
tmac@asus ~$ lspci -s 02:00.1 -v
02:00.1 Audio device: nVidia Corporation High Definition Au
Hi!
On my Asus X5DID laptop I have an internal microphone, a "mic in", as well as a
"line out", and of course internal speakers. The sound card is:
tmac@asus ~$ lspci -s 02:00.1 -v
02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev
a1)
Subsystem: ASUSTeK Comp
Hello ALSA users
The new Alsamixer-Qt4 0.6.0 is now available at
http://xwmw.org/alsamixer-qt4/
http://sourceforge.net/projects/alsamixer-qt4/files/
Changes (from the CHANGELOG):
* New support for string localization (i18n)
* German string translations (l10n)
* Reintroduced some aspects o
Hello lists
A new version Alsamixer-Qt4 (0.5.2) is available at
http://xwmw.org/alsamixer-qt4/
http://sourceforge.net/projects/alsamixer-qt4/files/
The only but quite drastic change is a new lighter slider widget style.
This makes sliders better distinguishable when there are a lot of them
(IMO)
Announcement:
A new version of the funny game "Catch-the-slider" aka
Alsamixer-Qt4 0.5.1 is now available at
http://xwmw.org/alsamixer-qt4/
http://sourceforge.net/projects/alsamixer-qt4/files/
This is mostly a GUI polishing release over 0.5.0 which seemed
to be reasonable stable.
Changes
GUI
Am 10.10.2010 15:28, schrieb Niccolò Belli:
> Awesome, best mixer ever!
Glad to hear :-).
Thanks,
Sebastian
--
Beautiful is writing same markup. Internet Explorer 9 supports
standards for HTML5, CSS3, SVG 1.1, ECMAScrip
Awesome, best mixer ever!
Thank you,
Darkbasic
--
Beautiful is writing same markup. Internet Explorer 9 supports
standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 & L3.
Spend less time writing and rewriting co
Hello again
After an almost complete rewrite to support separate channels views
in the main sliders and switches areas, Alsamixer-Qt4 0.5.0 is now
available.
http://xwmw.org/alsamixer-qt4/
http://sourceforge.net/projects/alsamixer-qt4/files/
This is a snapshot from the CHANGELOG file.
* The ch
Hello again
This is a bugfix release. Not all issues have been addressed, but
hopefully the most annoying ones.
1.)
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3678
The "EQ Peaks" mixer element gets skipped since there's not way to
display it correctly at the moment.
Also the mixer no
Hello everyone
I've been working on Alsamixer-Qt4 lately and compiled
the changes into a new release version 0.4.0.
Most importantly the cards list can be refreshed now
and the style got a little overhaul, too.
A more detailed changelog can be found at the xwmw.org page.
The new version 0.4.0 is
I recently changed from Fedora 10 (i386) to 12 (x86_64) and found the
following differences when using alsamixer:
* the items shown by alsamixer were slightly different from fc10 to
fc12 even though the hardware is the same (Asrock ION). I think I
recall there was an item called IEC958 in fc10 th
John Carlyle-Clarke wrote:
> Hi-
>
> I have a very strange situation. After a kernel upgrade, I get a crash
> if I run alsamixer in urxvt. If I run it in xterm or terminal, or by
> ssh, then it works. If I *then* run it in urxvt it works, although it
> pauses for a split second at the moment
Hi-
I have a very strange situation. After a kernel upgrade, I get a crash
if I run alsamixer in urxvt. If I run it in xterm or terminal, or by
ssh, then it works. If I *then* run it in urxvt it works, although it
pauses for a split second at the moment where it normally crashes. The
crash
Hi,
I have a system here where alsamixer does not list all of the controls
(specifically the one controlling which of the two analogue inputs is
sampled when recording happens, "Mic Capture Switch"). The control is
listed in the file that "asoundctl store" creates, and altering the
value and then
Geoffrey Leach wrote:
>
> FWIW, it appears that this (1.0.19) is the problem:
>
> function stop() {
> #
> # store driver settings
> #
> if [ -x $alsactl ]; then
> $alsactl -f $asoundcfg store
>
> The file as installed from the source distribution, does not have
> executable permissions
On 04/17/2009 01:16:26 AM, Clemens Ladisch wrote:
> Geoffrey Leach wrote:
> > I'm havind a problem with alsamixer. It appears not to save the
> > changes. The man page does not mention this, so perhaps its doing
> what
> > it is designed to do.
>
> It is only designed to change the sound card's mi
Geoffrey Leach wrote:
> I'm havind a problem with alsamixer. It appears not to save the
> changes. The man page does not mention this, so perhaps its doing what
> it is designed to do.
It is only designed to change the sound card's mixer settings.
> In that case, can anyone point me to a tool tha
I'm havind a problem with alsamixer. It appears not to save the
changes. The man page does not mention this, so perhaps its doing what
it is designed to do. In that case, can anyone point me to a tool that
makes permanent (mute, in this case) settings?
Thanks.
MG wrote, on 17/04/09 03:17:
> I can play mp3s throught my Extigy
> However the sound from web pages plays through the onboard sound
> Please help!!!
>
I think that sound from browser-based applications is going through the
default sound card.
You appear to have 2 sound cards, the inter
On Thursday 16 April 2009 19:28, MG wrote:
> Maybe I am not selecting it properly
> Can someone please give an example of how to select my card is it using :
> AlsaMixer v1.0.17
> Usage: alsamixer [-h] [-c ] [-D ] [-g] [-s] [-V
> ] [-a ]
> or 'aplay'??
Please stop top posting. Post you
I can play mp3s throught my Extigy
However the sound from web pages plays through the onboard sound
Please help!!!
On 16/04/2009, MG wrote:
>
> Maybe I am not selecting it properly
> Can someone please give an example of how to select my card is it using :
> AlsaMixer v1.0.17
> Usage: als
I need an example of how to use the -D command in aplay/alsamixer
Can you give an example of the command, preferably for the Extigy
I have got buntu to list the devices:
List of PLAYBACK Hardware Devices
card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 0: Intel ICH [Intel
82801DB-ICH4]
Maybe I am not selecting it properly
Can someone please give an example of how to select my card is it using :
AlsaMixer v1.0.17
Usage: alsamixer [-h] [-c ] [-D ] [-g] [-s] [-V
] [-a ]
or 'aplay'??
Alsa-user@lists.sourceforge.net
-- Forwarded message --
From: MG
Date
Thanks, it helps a lot:)
As you said, I find the configure file in /usr/share/alsa/alsa.conf in
ubuntu, and the the line "/usr/share/alsa/pulse.conf" makes the default to
be the PulseAudio. If i remove this line, the alsamixer would act as what i
expect.
2008/10/21 John Haxby <[EMAIL PROTE
Jiang Wei wrote:
> hi, all
> I am using the alsamixer command line(v1.0.17) in ubuntu
> intrepid beta.
> If using the command "# alsamixer" without any parameters, it
> outputs as following:
>
> Card: PulseAudio
> Chip: PulseAudio
> ...
> and only one bar shows up(the hardware i
That's normal when using PulseAudio.
2008/10/21 Jiang Wei <[EMAIL PROTECTED]>:
> hi, all
> I am using the alsamixer command line(v1.0.17) in ubuntu intrepid
> beta.
> If using the command "# alsamixer" without any parameters, it outputs
> as following:
>
> Card: PulseAudio
> Chip: Pulse
hi, all
I am using the alsamixer command line(v1.0.17) in ubuntu intrepid
beta.
If using the command "# alsamixer" without any parameters, it outputs
as following:
Card: PulseAudio
Chip: PulseAudio
...
and only one bar shows up(the hardware is multi-channels). If using the
command
Salatiel Filho wrote:
> On 12/13/07, Clemens Ladisch <[EMAIL PROTECTED]> wrote:
>> Salatiel Filho wrote:
>> > I am having a big trouble to make sound work on my ARM machine.
>> >
>> > alsamixer: function snd_mixer_load failed: Inappropriate ioctl for device
>>
>> Make sure that the kernel and the u
On 12/13/07, Clemens Ladisch <[EMAIL PROTECTED]> wrote:
> Salatiel Filho wrote:
> > I am having a big trouble to make sound work on my ARM machine.
> >
> > alsamixer: function snd_mixer_load failed: Inappropriate ioctl for device
>
> Make sure that the kernel and the userspace tools are compiled wi
Salatiel Filho wrote:
> I am having a big trouble to make sound work on my ARM machine.
>
> alsamixer: function snd_mixer_load failed: Inappropriate ioctl for device
Make sure that the kernel and the userspace tools are compiled with
exactly the same architecture and other options that can affect
I am having a big trouble to make sound work on my ARM machine. I am
running debian 4.
# uname -a
Linux LS-GL7D6 2.6.16.57-arm2 #7 Wed Dec 12 18:14:51 BRT 2007
armv5tejl GNU/Linux
Modules load successfully
# lsmod
Module Size Used by
snd_pcm_oss47680 0
snd_mixer
On Wed, 2007-10-24 at 14:05 +0200, Quasi Steady State wrote:
>
>
> Hi all,
>
> I am installing a clean linux distro from scratch. I copy the ALSA
> library and utilities (and library's needed by the utilities) from my
> host machine (Debian etch) to my clean linux distro and if i run
> alsamixer
Hi all,
I am installing a clean linux distro from scratch. I copy the ALSA library
and utilities (and library's needed by the utilities) from my host machine
(Debian etch) to my clean linux distro and if i run alsamixer i get the
following error:
alsamixer: relocation error: /lib/libpthread.so.0:
I am running 1.0.14 on a machine with centos 4.5
lspci reports:
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia
On Wed, 14 Feb 2007, Bokyun Na wrote:
> Hello,
> I have such a problem with alsa.
> modules are loaded without any problems. However, I could not open
> "alsamixer".
What do you mean "I could not open alsamixer"? What happened? did the
computer crash with smoke pouring out? Did you misspell the c
Hello,
I have such a problem with alsa.
modules are loaded without any problems. However, I could not open
"alsamixer".
My system is on Intel ICH5 chipset with ALC655 chip.
Thus, I set up with snd_intel8x0.o module. It is loaded without any problem.
Should I load other drivers such as snd_x.o?
I'm running Linus's latest git kernel with alsa 1.0.13.
Alsamixer announces that I have Card: VIA 8235 and
Chip: Realtek ALC650E
My problem, which started maybe two or three months ago,
is that the sound is still audible when alsamixer's
volume control is set to zero. I'd estimate that the
sound
On Thursday 03 August 2006 12:44, )\(@sS wrote:
> Hello everyone,
> i have been haaving problems with alsamixer.
> i have slackware 10.2 that came with kernel 2.4.31..
> sound didn;t work but i didnt wbother fixing it then... plus now i
> have installed a newer kernel 2.6.17.3 and after alot of tri
Hello everyone,
i have been haaving problems with alsamixer.
i have slackware 10.2 that came with kernel 2.4.31..
sound didn;t work but i didnt wbother fixing it then... plus now i
have installed a newer kernel 2.6.17.3 and after alot of trials i
managed to get the sound going using the snd_hda_int
Hi again,
===snip===
list of modules
===snap===
> >
> > removing them and only issuing a modprobe snd_intel8x0 loads only the
> > following modules:
>
> Why removed?
I found this link, there they use the same modules, well, no card name is
mentio
At Wed, 25 Jan 2006 07:40:53 -,
Sebastian Reitenbach wrote:
>
> Hi takashi,
>
>
> >
> > It's alsa-driver-*/snddevices included in alsa-driver tarball.
> >
> >
> > Takashi
> >
>
> I was looking only for a snddevices.sh or *.sh prior, but now i found and ran
> it without receiv
Hi takashi,
>
> It's alsa-driver-*/snddevices included in alsa-driver tarball.
>
>
> Takashi
>
I was looking only for a snddevices.sh or *.sh prior, but now i found and ran
it without receiving any error messages. but still no sound.
I ran alsaconf. then I have the following mo
At Tue, 24 Jan 2006 14:13:55 -,
Sebastian Reitenbach wrote:
>
> Hi again,
> ===snip=
> ===snap=
> >
> > Try running the "snddevices.sh" script that comes with alsa...
> >
> I try to find the snddevices.sh but unfortunately cannot find it on m
Hi again,
===snip=
===snap=
>
> Try running the "snddevices.sh" script that comes with alsa...
>
I try to find the snddevices.sh but unfortunately cannot find it on my
harddisk. so googled for it, and found out that it has to be in the
alsa-
On Tue, 2006-01-24 at 08:31 +, Sebastian Reitenbach wrote:
> Hi Lee and alsa users,
>
> > >
> > > I am trying to get a mentioned card to work. unable to find the error.
> > >
>
> > > So I downloaded the alsa-driver-1.0.9.tar.bz2 archive to have the latest
> > >
>
> >
Hi Lee and alsa users,
> >
> > I am trying to get a mentioned card to work. unable to find the error.
> > So I downloaded the alsa-driver-1.0.9.tar.bz2 archive to have the latest
> > drivers.
> >
>
> That is NOT the latest version! The latest stable release
On Fri, 2006-01-20 at 17:00 +, Sebastian Reitenbach wrote:
> Hi alsa users,
>
> I am trying to get a mentioned card to work. unable to find the error.
> So I downloaded the alsa-driver-1.0.9.tar.bz2 archive to have the latest
> drivers.
>
That is NOT the latest versio
Hi alsa users,
I am trying to get a mentioned card to work. unable to find the error.
So I downloaded the alsa-driver-1.0.9.tar.bz2 archive to have the latest
drivers.
lspci:
:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS]
Sound Controller (r
On Sat, 05 Jun 2004 04:47:34 -0700, Frans Ketelaars wrote:
> On Saturday 05 June 2004 12:54, Matthijs van Aalten wrote:
>> via82cxxx_audio27528 0
>> ac97_codec 18956 1 via82cxxx_audio
>
> The two modules above are OSS modules, you have to remove them.
Thanks you very much -
Matthijs van Aalten wrote:
Result from ls /dev/snd/controlC0:
crw-rw1 root audio 116, 0 Jun 5 12:31 /dev/snd/controlC0
Maybe you should make that "crw-rw-rw-", if you want to use it as
non-root: chmod o+rw /dev/snd/controlC0
Greg
---
On Saturday 05 June 2004 12:54, Matthijs van Aalten wrote:
> Hello,
>
> (apologies for a long post, but I thought it would be best to
> include as much relevant information as I could)
>
> I'm trying to install Alsa on my system, but alsamixer returns
> the error message:
> alsamixer: function
Hello,
(apologies for a long post, but I thought it would be best to include
as much relevant information as I could)
I'm trying to install Alsa on my system, but alsamixer returns the
error message:
alsamixer: function snd_ctl_open failed for default: No such device
System:
Via Epia M1
Erik P. Olsen wrote:
> I have just downloaded and installed ALSA 1.0.4 according to the description
> for sound card AW320 (cs46xx) and when I run alsamixer all I get is:
>
> alsamixer: function snd_ctl_open failed for default: No such file or directory
Do the device nodes in /dev/snd/ exist? Did
I have just downloaded and installed ALSA 1.0.4 according to the description
for sound card AW320 (cs46xx) and when I run alsamixer all I get is:
alsamixer: function snd_ctl_open failed for default: No such file or directory
I did not have that error with ALSA 1.0.3. Any work-around?
Regards,
Er
On Sat, 14 Feb 2004, Randy Broman wrote:
> I have a Biostar system with Athlon board, VT8237 southbridge
> (includes audio) and C-Media CMI9739A AC97 Codec. The system
> has SuSE 8.1, but with custom 2.6.2 kernel. I compiled the kernel with
> soundcore and snd_via82xx as modules, updated /etc/mo
I have a Biostar system with Athlon board, VT8237 southbridge
(includes audio) and C-Media CMI9739A AC97 Codec. The system
has SuSE 8.1, but with custom 2.6.2 kernel. I compiled the kernel with
soundcore and snd_via82xx as modules, updated /etc/modprobe.conf,
and the modules seem to load correctl
everything in alsamixer come in two instances. there is Master and Master
1, PCM and PCM 1, Micro and Micro 1, etc... what does it mean ? of course,
those marked '1' don't work at all...
I'm running gentoo kernel 2.6 with alsa 1.0.0.rc2, oss emu, CS46xx driver
compiled in, and alsa-lib and alsa-ut
Clemens Ladisch schrieb:
Jörg Böhnke wrote:
bash-2.05a$ cat /proc/asound/cards
1 [ALS4000]: ALS4000 - Avance Logic ALS4000
Avance Logic ALS4000 at 0xd600, irq 9
When you have one card, it should be at index 0, not 1. Probably,
there's a line similar to:
options sn
Jörg Böhnke wrote:
> bash-2.05a$ cat /proc/asound/cards
> 1 [ALS4000]: ALS4000 - Avance Logic ALS4000
> Avance Logic ALS4000 at 0xd600, irq 9
When you have one card, it should be at index 0, not 1. Probably,
there's a line similar to:
options snd-als4000 index=1
Clemens Ladisch schrieb:
Jörg Böhnke wrote:
alsamixer: function snd_ctl_open failed for default: No such device
Is the driver for your card loaded?
Does it show up in /proc/asound/cards?
Regards,
Clemens
Hi Clemens,
thanks for your rapid support
the driver is loaded:
bash-2.05a$ cat /proc/aso
On Fri, 09 Jan 2004 10:24:57 -0600
"Gary Cauthon" <[EMAIL PROTECTED]> wrote:
> The error "no such device" does not tell you anything. The alsa
> driver returns ENODEV any time it encounters any type of error. So
> "no such device" translates into "something went wrong". Without
> knowing more d
The error "no such device" does not tell you anything. The alsa driver
returns ENODEV any time it encounters any type of error. So "no such
device" translates into "something went wrong". Without knowing more
details, it is impossible to troubleshoot this sort of problem.
-Gary
From: J
Jörg Böhnke wrote:
> alsamixer: function snd_ctl_open failed for default: No such device
Is the driver for your card loaded?
Does it show up in /proc/asound/cards?
Regards,
Clemens
---
This SF.net email is sponsored by: Perforce Software.
Hi everybody,
is there anybody who knows this problem:
alsamixer: function snd_ctl_open failed for default: No such device
I downloaded alsa* Release 1.0.1 compiled and installed it.
I am able to find the modules with lsmod.
Help is appreciated.
Thanks a lot.
Jörg
---
Hi all,
alsamixer and amixer both get a seg fault at msort_with_tmp
within glibc. I am not sure whether the bug is in alsa-utils or
glibc or the patch that I applied to my kernel. No OSS emulation.
Sound card driver is es1968. aplay and arecord don't produce a
seg fault. Most probably the call to
How do I find out which of the 30 or so elements in gnome-alsamixer
corresponds to which of the dozen or so inputs and outputs on my SB Live
platinum 5.1? The labels are different, and I know little about the theory
of all this. I can't find any documentation. All that came with the
gnome-alsamix
Hi
I builded the alsa driver, lib and utils for my SB Live 128 following
the information in the doc. Everything builded fine, installation was
also without any problem. then I load the modules, evething was ok and
as the documentation point out, the sound was put on mute. But here is
my proble
HI!
Did you unmute the items in alsamixer? You can do that by pressing 'm' when
on an item. With m you can toggle mute, unmute. That's all I can think of.
Kindest regards
Julien
Julien Patrick Claassen
[EMAIL PROTECTED]
[EMAIL PROTECTED]
http://www.geocities.com/jjs_home
SBS C-LAB
a question about alsamixer.
I have modules loaded and have cranked up all the
alsamixer settings but dont have sound...maybe because
in the Item: section next to each category is [off]
example Master [off]
master digital [off]
master digital 1 [off]
etc... is there a way to change off to [on],
On 08/26/03 03:02 panos statiris spoke thusly
Trying to run alsamixer I get no graphical interface (by the way should
I get a graphical interface?)
No you should NOT.
This is what I get :
alsamixer: failed to open mixer #0/#0: Success
Maybe something about permissions isn't right, I have no ide
Trying to run alsamixer I get no graphical interface (by the way should
I get a graphical interface?)
This is what I get :
alsamixer: failed to open mixer #0/#0: Success
Any guess of what may be wrong?
My modules.conf is this
>
# ALSA portion
al
After installing ALSA according to the instrsuctions, I attempt to
launch alsamixer, I get the error:
alsamixer: function snd_ctl_open failed for default: No such file or
directory
What can I do to fix this?
Thanks,
Harold
---
This SF.Net emai
Harold Martin <[EMAIL PROTECTED]> writes:
> After installing ALSA according to the instrsuctions, I attempt to
> launch alsamixer, I get the error:
> alsamixer: function snd_ctl_open failed for default: No such file or
> directory
> What can I do to fix this?
What is the output when you run
$
Hello, I just compiled Alsa .9.6 on Redhat 9.0.93 for my Audigy.
Everytime I run alsamixer I get a segmentation fault. The driver
installs correctly with the exception of the mixer problem. I cannot
test the sound output, because alsa automatically starts with the
channels muted. Here is an strace
Hello. I'm having trouble with getting the mixer to
work with the latest test kernel. I do have sound, and
I can ejust it's vollume and other setting with, for
example, kde's mixer. But none of the progs in the
alsa utils package seems work.
I was using alsa version 0.5.12a in my 2.4.21 kernel
whic
On 07/16/03 06:37 Christian From spoke thusly
I'm trying to get some sound from my delta66 card from m-audio under
Mandrake 9.1. The driver ice1712 seems to be there and working, but no sound.
I was told I had to open alsamixer and unmute all channels, but I can't open it, I'm getting "no mixer e
Le Mercredi 16 Juillet 2003 12:37, Christian From a écrit :
> I'm trying to get some sound from my delta66 card from m-audio under
> Mandrake 9.1. The driver ice1712 seems to be there and working, but no
> sound. I was told I had to open alsamixer and unmute all channels, but I
> can't open it, I'm
I'm trying to get some sound from my delta66 card from m-audio under
Mandrake 9.1. The driver ice1712 seems to be there and working, but no sound.
I was told I had to open alsamixer and unmute all channels, but I can't open it, I'm
getting "no mixer elems found" in the terminal when I try it.
Is
I had sound and then it stopped I ran alsa mixer and got this.
What do I need to do??
[root@aamehl aamehl]# alsamixer
alsamixer: function snd_ctl_open failed for default: No such file or
directory
Thanks
Aaron
did you run ./snddevices when u installed the alsa modules?
---
I had sound and then it stopped I ran alsa mixer and got this.
What do I need to do??
[root@aamehl aamehl]# alsamixer
alsamixer: function snd_ctl_open failed for default: No such file or
directory
Thanks
Aaron
--
Aaron <[EMAIL PROTECTED]>
---
On Thu the 06 Feb 2003 at 15 hours EST
SB wrote...
>
>>
>> things seem to be working, except for alsa-utils like
>> alsamixer amixer and so on. Here are the errors:
>>
>> alsamixer
>> alsamixer: function snd_ctl_open failed for default: No such file or
>> directory
>>
>> amixer
>> amixer: Mixe
things seem to be working, except for alsa-utils like
alsamixer amixer and so on. Here are the errors:
alsamixer
alsamixer: function snd_ctl_open failed for default: No such file or
directory
amixer
amixer: Mixer attach default error: No such file or directory
have you tried to run ./sndde
Hello,
I'm using a wolk kernel 2.4.18 with alsa sound only.
I haven't installed OSS compat libs.
things seem to be working, except for alsa-utils like
alsamixer amixer and so on. Here are the errors:
alsamixer
alsamixer: function snd_ctl_open failed for default: No such file or
directory
ami
Hi,
On Sat, 16 Nov 2002, Stephen Mollett wrote:
> Hi,
>
> On Saturday 16 Nov 2002 02:09, A.H.Gilbert wrote:
> > Also I can't get pmidi to work.
> > $ pmidi -l
> > Port Client name Port name
> > 64:0 External MIDI 0 MIDI 0-0
> > 65:0 Emu10k1 W
Hi,
On Saturday 16 Nov 2002 02:09, A.H.Gilbert wrote:
> Also I can't get pmidi to work.
> $ pmidi -l
> Port Client name Port name
> 64:0 External MIDI 0 MIDI 0-0
> 65:0 Emu10k1 WaveTable Emu10k1 Port 0
> 65:1 Emu10k1 WaveT
Hi,
I'm using alsa-0.9.0rc5 with SBLive 5.1 digital.
I get an enormous range of ncurses columns in alsamixer ( full list
below).
At present I am transfering cassettes to CD and so recording them as .wav
files.
To do this and listen to the .wav files with either arecord/aplay or snd
and also to
Hello!
I get the following error when trying to run alsamixer to turn my sound
volume up (i.e i cant get the sound to work!)
ALSA lib simple.c:944:(simple_add1) helem (MIXER,'IEC958 Playback
Switch',0,0,0) appears twice or more
alsamixer: function snd_mixer_load failed: Invalid argument
i compil
On Tue, 2002-07-23 at 02:37, Takashi Iwai wrote:
> At 22 Jul 2002 23:42:27 -0700,
> Florin Andrei wrote:
> >
> > Quite embarassing, i discovered the permissions on the directory
> > /usr/share/alsa were 644 :-(
> > Changed that to 755 and now it works.
>
> oh, it's a good news.
> i totally forgo
Takashi Iwai wrote:
>>Quite embarassing, i discovered the permissions on the directory
>>/usr/share/alsa were 644 :-( Changed that to 755 and now it works.
>
> oh, it's a good news. i totally forgot this possibility. should be added to FAQ :)
I added this to AlsaTips at the Wiki. Hopefully this
At 22 Jul 2002 23:42:27 -0700,
Florin Andrei wrote:
>
> Quite embarassing, i discovered the permissions on the directory
> /usr/share/alsa were 644 :-(
> Changed that to 755 and now it works.
oh, it's a good news.
i totally forgot this possibility.
should be added to FAQ :)
Takashi
Hi,
At Tue, 23 Jul 2002 16:59:41 +1000,
Mark Constable wrote:
>
> Mark Constable wrote:
> > Try "chmod 666 -R /dev/snd" and see if that allows you to at least
> > run all apps as any user...
>
> Toxic advice... should have been "chmod 666 /dev/snd/*". And to compliment
> this insecure setting
1 - 100 of 135 matches
Mail list logo
