e:
>>>
>>>> We had exact same drama, but assumed it was FM. Cambium believed that
>>>> too. Replaced years old UBNT gear with F300. Couldn’t get 1 Gbps to hold.
>>>> Not a single drama for the years before with UBNT junk.
>>>>
>>>&g
gt; We had exact same drama, but assumed it was FM. Cambium believed that
>>> too. Replaced years old UBNT gear with F300. Couldn’t get 1 Gbps to hold.
>>> Not a single drama for the years before with UBNT junk.
>>>
>>>
>>>
>>>
>>>
>&
h UBNT junk.
>>
>>
>>
>>
>>
>> *From:* AF *On Behalf Of *Jaime Solorza
>> *Sent:* Saturday, 17 July 2021 13:09
>> *To:* AnimalFarm Microwave Users Group
>> *Subject:* Re: [AFMUG] Cambium Force 300 Ethernet question
>>
>>
>>
>
*Sent:* Friday, July 16, 2021 10:49 AM
> *To:* AnimalFarm Microwave Users Group
> *Subject:* Re: [AFMUG] Cambium Force 300 Ethernet question
>
> We have recently seen similar issues when using Chuck's surge
> suppressors. Not sure what changed, the RJ 45s, The jack Chuck uses, or my
&
rday, 17 July 2021 13:09
> *To:* AnimalFarm Microwave Users Group
> *Subject:* Re: [AFMUG] Cambium Force 300 Ethernet question
>
>
>
> KCOS TV
>
> PBS station ...their STL is at 23GHz...
>
> I am replacing the cable and connectors tomorrow morningthe radios i
> replaced
Microwave Users Group
Subject: Re: [AFMUG] Cambium Force 300 Ethernet question
KCOS TV
PBS station ...their STL is at 23GHz...
I am replacing the cable and connectors tomorrow morningthe radios i
replaced were Powerbridges!!
On Fri, Jul 16, 2021, 8:37 PM Mark Frost
mailto:mfr...@onq.com.au>>
KCOS TV
PBS station ...their STL is at 23GHz...
I am replacing the cable and connectors tomorrow morningthe radios i
replaced were Powerbridges!!
On Fri, Jul 16, 2021, 8:37 PM Mark Frost wrote:
> Is it remotely close to any sort of FM transmitter?
>
>
>
> *From:* AF *On Behalf Of *Jaime Sol
Is it remotely close to any sort of FM transmitter?
From: AF On Behalf Of Jaime Solorza
Sent: Friday, 16 July 2021 12:32
To: AnimalFarm Microwave Users Group
Subject: [AFMUG] Cambium Force 300 Ethernet question
Installed a PTP link with great signal but Ethernet port will not lock at
1000FDX.
I moved the jacks up as high as they can go.
From: Darren Shea
Sent: Friday, July 16, 2021 2:29 PM
To: 'AnimalFarm Microwave Users Group'
Subject: Re: [AFMUG] Cambium Force 300 Ethernet question
I know there’s supposedly no such thing as a stupid question, so please be kind
if thi
might help…
>
>
>
> *From:* AF [mailto:af-boun...@af.afmug.com] *On Behalf Of *Chuck McCown
> via AF
> *Sent:* Friday, July 16, 2021 2:24 PM
> *To:* AnimalFarm Microwave Users Group
> *Cc:* Chuck McCown
> *Subject:* Re: [AFMUG] Cambium Force 300 Ethernet question
>
>
>
&g
Group
Cc: Chuck McCown
Subject: Re: [AFMUG] Cambium Force 300 Ethernet question
There is not enough room to make a hole large enough for a grommet that will
allow a cat5 plug to pass. We have about .735” to work with. You need a
minimum of .750 hole and the grommet itself is 1” dia.
I
nstall it.
I doubt no one wants to feed the wire through then install the plug.
*From:* Jason McKemie
*Sent:* Friday, July 16, 2021 11:56 AM
*To:* AnimalFarm Microwave Users Group
*Subject:* Re: [AFMUG] Cambium Force 300 Ethernet question
I've drilled holes in the bottom of the DC SS enclosure
doubt no one wants to feed the wire through then install the plug.
From: Jason McKemie
Sent: Friday, July 16, 2021 11:56 AM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] Cambium Force 300 Ethernet question
I've drilled holes in the bottom of the DC SS enclosures, directly belo
I've drilled holes in the bottom of the DC SS enclosures, directly below
the connectors. Works well enough for those, it would be a bit more of a
pain with the RJ45 connector though since you'd have to install the end
afterwards.
On Fri, Jul 16, 2021 at 11:51 AM Carl Peterson
wrote:
> We have r
is a gamble in and of itself. Will
customers pay say $5 more to have three entrances. Cost me probably $15K just
to find out.
From: Carl Peterson
Sent: Friday, July 16, 2021 10:49 AM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] Cambium Force 300 Ethernet question
We have
We have recently seen similar issues when using Chuck's surge suppressors.
Not sure what changed, the RJ 45s, The jack Chuck uses, or my techs but we
figured out that it was caused by the cable getting pulled sideways in the
surge enclosure and the tolerance stack on the RJ/RJ jack just not working
I've put up alot of the F300, haven't seen any problems. Bad cable or
Radio? Did you try a different POE? 9/10 times Ethernet seems to be a
problem with the termination and/or cable. I've done 1000's of ends,
but just the other day I did one with one blue and green wire switched,
I think th
Cable or connector issue possibly.
On Thursday, July 15, 2021, Jaime Solorza wrote:
> Installed a PTP link with great signal but Ethernet port will not lock at
> 1000FDX...only 100FDx...if i force it it loses connection or 10mbps hex...
> Latest firmware...
> Any ideas?
> I even put a Trendnet
18 matches
Mail list logo
