Move Data from Bad Tapes

Hi all. I've got the following Problem: We have a StorageTek - Tape Robot and we have nearly 200 Tapes that ADSM uses, that are damaged. So i have to move the Data to other volumes. I would try this with the Command Move Data, one for each tape. My question is: is there a better way to move the

Re: Mount Retention

I reported this defect here months ago. Unfortunately I do not think it was fixed in 3.7.3.0 either! As somebody has suggested, set your mountretension to 0. -- Joshua S. Bassi Senior Technical Consultant IBM Certified Specialist- AIX / HACMP Tivoli Certified Consultant - TSM 3.7 Symatrix Tech

Re: Restoring a server

The syntax of the command on Unix and NT is dsmserv format n lognames m dbnames. This creates the volumes, but more importantly creates the dsmserv.dsk file that TSM uses to find the db and log vols. I guess I'm in the mood to be expansive. Just trying to add the finer points. Kelly J. Lipp St

Re: Restoring a server

Do you have DRM? Did you want to test your Recovery Plan File (While you still can) instructions? This is foremost on my mind since I have a DR test scheduled next month for my ADSM server. We will be going over our instructions with a fine tooth comb. > -Original Message- > From: Guill

Re: Windows 2000 backup

Trevor, My main question is do I need to run all of these commands or does an incremental backup of the C: drive pick up everything as needed. > The backup of the C: drive only includes the Registry. If these command do need to be run outside a normal incremental backup how are others scheduli

Re: Restoring a server

You are right. We had an OS390 server crash a few months ago and that was the step that was keeping us from going any further. When we finally read about it in the manual all went fine after that. Guillaume - Original Message - From: "Cook, Dwight E" <[EMAIL PROTECTED]> To: <[EMAIL PROTEC

Re: ANS0106E for Netware

Sorry, I don't have any ideas. My Netware servers are running client version 3.7.2 and out TSM server is 3.7.3 , but I'm not seeing that issue. We are running IP, all Netware servers are in DNS ( run on netware ) . "Crump, Adam (CC-MIS Open Sys)" <[EMAIL PROTECTED]> on 07/25/2000 02:20:05 PM

Re: Restoring a server

did you do the dsmserv with the option to "install" all the newly defined volumes, listing the quantity of logs and their names and the quantity of dbvols and their names??? I believe it is dsmserv install 1 logname 1 dbfilename double check the manual... you have to do this to init the vo

Re: Mount Retention

Yep, they've screwed up... at least in my 3.7.2.0 aix server code running with a 3494. I've set my mountretention to 0 or max of 1 Dwight > -- > From: Rupp Thomas (Illwerke)[SMTP:[EMAIL PROTECTED]] > Reply To: ADSM: Dist Stor Manager > Sent: Tuesday, July 25, 2000 2:12

ANS0106E for Netware

We just upgraded to TSM 3.7.3 and it appears Netware can no longer connect. The Netware client is running TSM 3.7.1. The only change that was made was on the server, Netware could connect to ADSM 3.1.2.40 with no issues, but now when load dsmc is executed the following appears: ANS0106E READINDE

Re: Mount Retention

Hi Thomas, >I always thought that TSM would dismount an IDLE tape - even when >the Mount Retention period has not expired - when there are no free >mount points available. It should. I have had the same problem ever since upgrading to TSM 3.7.20 from ADSM 3.1.2.50 (both on AIX 4.3.2.0). I put

ADSMConnect Agent for Oracle

I Have "TSM Server 3.7 for NT" whit clients "Solaris 2.5 / Oracle 7.1.6.2". This available TDP for Oracle or ADSMConnect Agent for Oracle Backup for solaris 2,5 with Oracle 7,1,6,2 and that vercion of EBU I require? Any Help appreciated. Thanks in Advance. Ricardo Negrete Ingeniero de Sis

Mount Retention

Hi *SM-ers, on our new 3494 I have defined Mount Retention: 10 minutes. When I do a COPY STGPOOL and TSM needs a second input tape the previously mounted tape remains in status IDLE for 10 minutes before it is unmounted and the second input tape is mounted. I always thought that TSM would dismou

Restoring a server

Hello All, I'm getting ready to migrate from ADSM to TSM and to move the server from one H50 to another H50. This process gives me the opportunity to test out my disaster recovery procedure. I have moved a copy of ADSM to the new H50 and migrated to TSM. This ran fine. I then backedup up the

Re: NT node being seen as 127.0.0.1??

John N. Stacey wrote: "I get the following message in the logs: ANR82093 Unable to establish TCP/IP session with 127.0.0.1 - connection refused." I have seen this happen, in my case dsm.opt had 127.0.0.1 set for TCPCLIENTAddress. After removing this option and restarting the client scheduler, th

NT node being seen as 127.0.0.1??

Hello, I am having problems setting up a specific NT node using the latest 3.7.2 windows backup client. I have a client which is called Argon and can be resolved from the tsm server. The node has been setup on the server. I can also backup the machine from the console of the node itself and the

Re: Upgrade to Tivoli

A01 and C00 ... in IBM's (read: lawyer's) terms that could be a *big* difference. I'd be interested in knowing if its an out-of-maintenance out-of-contract issue and not technical. I have been told that for our C10 we will get the TSM 3.7 "microcode" upgrade but that 4.0 may not be available f

Netware Incremental Errors

Netware 4.11 TSM 3.7.2.0 TSM Server 3.7.3.0 OS/390 2.6 During an incremental backup of this server, we are getting some wierd errors. On the client DSMERROR.LOG we are seeing: 07/25/2000 11:11:12 findAbortState: Unknown abort #32 from the server 07/25/2000 11:11:18 ANS1248E An active restore fo

Re: Netware long name support

Hello, Thankyou for your quick reply. included here is my dsm.opt file. As You can see I already have specified the "memoryefficientbackup no" option with no luck. I've been experimenting with various parameters to try and improve backup/restore performance. I find CPU utilization is very heavy o

Re: Upgrade to Tivoli

If you are under maintenance, your CE can order it for you. We have our TSM 3.7 upgrade (it's called microcode) in house and will be installing it next month. Oh yeah, our NetStore box is a part number 3466-C00. It came loaded with 3.1.2.something... Phil Bone Sr. Systems Consultant Network S

Re: TSM tapes

And they will stay empty until they are checked back into the library or by having their access changed to readwrite. This is a good thing. If TSM simply changed offsite tapes from empty to scratch you would lose track of them since TSM does not track scratch tapes that are not in a library. Tr

Upgrade to Tivoli

I was wondering if anyone else is in the same boat I am. We are trying to upgrade our ADSM 3.1.2.20 to Tivoli. I was just informed however that because we have a Netstore a01, that we can not upgrade. My question is if anyone else has the same problem, what are you going to do?

Re: Moving from RS6K AIX H50s to H70s

Hi Ken, Been there, did that. It may be easier than you think. This is all predicated on having SSA disks, but here's what I did: 1. Made sure all ADSM 'space' was on ssa, in it's own VG. (this includes vol hist, device config, scripts...in short anything needed to run ADSM apart from the bina

Moving of HSM Filesystem

Hi, We are planning to move a HSM Filesystem (32GB) between two SP Nodes. The nodename will have to change. The ADSM Server will stay the same. Has anybody done this before? Any help would be appreciated. ADSM Server 3.1.2.50 Aix 4.3.3 Thanks and regards Gerrit van Zyl begin:vcard n:; x-mo

Re: TSM tapes

Well, if you look in your listing below you'll see a > Delay Period for Volume Reuse 5 this indicates that those volumes will remain empty for 5 days before rolling back scratch... Dwight > -- > From: Shekhar Dhotre[SMTP:[EMAIL PROTECTED]] > Reply To: ADSM: Dist Stor Manager

Re: TSM tapes

Hi, thanx . Now i am having following parameters defined so Copy Storage Pools : COPYPOOL so what do i do of the tapes those are in library , but lists as empty , and not scratch. if they are not being used then logically they should be listed as a scratch, if used they should not list as a em

Re: How to Restore crashed Nt /AIX server.?

You're welcome :-) -Message d'origine- De : Shekhar Dhotre [mailto:[EMAIL PROTECTED]] Envoyé : mardi 25 juillet 2000 15:03 À : [EMAIL PROTECTED] Objet : Re: How to Restore crashed Nt /AIX server.? Thank you very much vince . I am downloading redbooks , and after going thorugh if anythi

Re: TSM tapes

1st try a q stg tapepool f=d and look for the reuse delay... see if it is greater than zero, that would explain the empty state without rolling back scratch Ok, you checked in the libvols to the library using device stk9710 as scratch, correct ? For each storage pool (such as tapepool) the

TSM tapes

Hi All, I have inserted some scratch tapes in to the stk9710 lbrary. now they are not being used by TSM , and lists as a empty. when i tried to remove the tapes by coomand tsm: TSM>del volume MED546 discardd=yes. ANR2020E DELETE VOLUME: Invalid parameter - YES.. ANS8001I Return code 3. it fire

Re: How to Restore crashed Nt /AIX server.?

Thank you very much vince . I am downloading redbooks , and after going thorugh if anything that i can,`t understand i will ask you. Thanks once again Shekhar ..

Delete Backuppiece Doesn't make files inactive

Hi All, I've set up a TSM/TDP/RMAN configuration, and am able to backup my Oracle 8.0.5 Database to TSM using RMAN. I have now carried out a number of database backups and find that some backuppieces have become obsolete. I have deleted the obsolete backuppieces (using the change backuppiece de

Re: Asking : Re: TRying to read ACTLOG

Hehe :-) On se résume: >Is it possible ? Ye ;-) >Will I get "catastrophic error" ? N. Only if you want to send the UserID/password pair when opening the connection. Just wait for the driver to prompt you for them and it will be OK. That error never occurs in Access since it always ask yo

Asking : Re: TRying to read ACTLOG

Merci Vincent, t'es un pote ! I didn't understand. Is it possible ? or I will get catastroph error ? How do I link ACCESS to ACTLOG ? Thank you very much ! --- Vincent CADET <[EMAIL PROTECTED]> wrote: > Michel, > > There is a way indeed using ODBC. But, as far as I'm > concerned I've not succee

Re: TRying to read ACTLOG

Michel, There is a way indeed using ODBC. But, as far as I'm concerned I've not succeeded in opening any table in TSM with a silent login (i.e. passing UID and PWD directly to the driver). I get a "Catastrophic failure" and I don't know why. I've submitted that problem to Tivoli so far. I get no

Re: inclexcl list for DB2 backup

On Tue, Jul 25, 2000 at 12:43:46PM +0800, Eric Tang wrote: > I have config db2 backup by ADSM. In order to exclude db2 files from > filesystem incremental backup, how can I get the list of directories/files > to be coded in the exclude list. Eric, you did not mention the operating system etc. thin

API: TRying to read ACTLOG

Hi everbody anb thanks for precedent answers I am trying to read ACTLOG message to ask "How Are YOu?" to the server all the time. I succeed to do this with batch file is there another possibility e.g. with ODBC ? Thank you __ Do You Yahoo!? Get

Re: Netware long name support

Blair, To convert your filespaces to long name support, it is not sufficient to omit the parameter "memoryefficient yes" from your dsm.opt. You must run a full uncremental backup with "memoryefficientbackup no" in your dsm.opt. Dont forget to unload dsmc to pick up the change. This will force conv

Re: How to Restore crashed Nt /AIX server.?

I've gone through a bare-metal-restore of an NT server. I've had to restore it from a separate partition, without the need of a repair disk (that's the goal). You may follow the instructions in that red book: "SG24-2231-00 Windows NT Backup and Recovery with ADSM" Everything is clear and that's

Re: TSM Update / actual version and password question

Michael, The version number is also written in the "About" box in TSM utilities. Do you have the correct number in that box ? You might not have disabled all running TSM services before the upgrade (TSM Sched, Acceptor, remote client agent, adsm scsi driver, aso). As for the password expiration

Antwort: 3494 Tape library slots

At the library manager is an option under commands, inventory, new storage. That means you del the old inventory, after you do this, you start adsm processe audit libr to synchronize the inentory with the adsm db, after that the categories for the tapes at 3494 is the same as in ADSM db for these