[Bug 202454] Re: Scrolling continues after releasing arrow key
It happens to me out of the box with Intrepid. This is on an MSi Wind, so I suppose the "underpoweredness" of the machine is an important factor. But this should not happen. It is particularly noticable here, with almost any webpage. For instance in this launchpad page, if I'm at the top of the page and press the down key until the scollbar reaches the middle position, and then release the key, scrolling continues for *several seconds* until the bottom of the page is reached. -- Scrolling continues after releasing arrow key https://bugs.launchpad.net/bugs/202454 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 364786] Re: openoffice slide show doesn't work with dual screen
Hi, it seems the problem is caused by the openoffice.org-gtk package. Uninstalling it solves the problem, installing it again brings the problem back. I also tried with the upstream version, and the problem does not occur (and there is no gnome integration). -- openoffice slide show doesn't work with dual screen https://bugs.launchpad.net/bugs/364786 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 352353] Re: Regression: xrandr doesn't detect native resolution for external LCD
At some point this problem got solved in Jaunty (sorry I didn't log which package update did the trick). However, it is present now in Karmic. -- Regression: xrandr doesn't detect native resolution for external LCD https://bugs.launchpad.net/bugs/352353 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 364786] [NEW] openoffice slide show doesn't work with dual screen
Public bug reported: Hardware: Dell Latitude D810, ATI Radeon Mobility X600, using open-source driver. Monitors are configured with xrandr, internal monitor (1920x1200) on the right of external monitor (1680x1050). With ooimpress, when I attempt to start the slideshow, only two scrollbars appear on the monitor on which the slideshow is supposed to appear; whatever was displayed on the screen prior to starting the slideshow remains displayed, but cannot be interacted with (ie., there is a window with no content except the scrollbars displayed on top of the whole monitor, and it fails to paint anything so whatever was drawn on the screen remains there). The content of the slides do not appear, and I cannot exit the "slide show" by pressing Escape or Alt+F4, I have to use xkill to get rid of it. When only one monitor is configured, the slide show works without problems. ** Affects: ubuntu Importance: Undecided Status: New -- openoffice slide show doesn't work with dual screen https://bugs.launchpad.net/bugs/364786 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 364786] Re: openoffice slide show doesn't work with dual screen
Oops... this is on Jaunty, openoffice.org-impress 1:3.0.1-9ubuntu3 -- openoffice slide show doesn't work with dual screen https://bugs.launchpad.net/bugs/364786 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 250468] Re: Bluetooth mouse does not connect after hibernate
Same problem here. Dell Latitude D810, ubuntu hardy kernel (2.6.24-19-generic), integrated usb bluetooth adapter: Bus 002 Device 024: ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth This happens from time to time after resume from suspend, although most of the time it works correctly. -- Bluetooth mouse does not connect after hibernate https://bugs.launchpad.net/bugs/250468 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 276050] Re: RT2500 card drops rate to 1M
Probably the same as Bug #190515 -- RT2500 card drops rate to 1M https://bugs.launchpad.net/bugs/276050 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 190515] Re: [Hardy] Low bandwidth with rt2400 / rt2500 drivers
I also get 1Mbit/s out of my rt2500 on an up to date Intrepid, and I can force it to 54M with iwconfig. -- [Hardy] Low bandwidth with rt2400 / rt2500 drivers https://bugs.launchpad.net/bugs/190515 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 315271] Re: hal-info update causes resume from suspend issue
** Attachment added: "hal-old.txt" http://launchpadlibrarian.net/21877106/hal-old.txt -- hal-info update causes resume from suspend issue https://bugs.launchpad.net/bugs/315271 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 315271] Re: hal-info update causes resume from suspend issue
** Attachment added: "hal-new.txt" http://launchpadlibrarian.net/21877110/hal-new.txt -- hal-info update causes resume from suspend issue https://bugs.launchpad.net/bugs/315271 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 315271] [NEW] hal-info update causes resume from suspend issue
Public bug reported: Binary package hint: hal-info An update to hal-info causes a strange behavior on a Dell Latitude D810 laptop: resuming from suspend with an external monitor plugged in causes the internal monitor to not display anything, regardless of how the external monitor is configured (clone, big desktop, off). A few details: - The backlight seems to be turned on. - Before the hal-info update, when resuming from suspend, the text-console blinking cursor briefly appears on the internal monitor before the desktop shows up; after the update, the cursor appears on the external monitor. This is 100% reproducible. Upgrading from hal-info 20081013-0ubuntu3 (the version that is on the Intrepid CD) to 20081124-0ubuntu1~intrepid makes the problem appear, downgrading to the former makes the problem disappear. ** Affects: hal-info (Ubuntu) Importance: Undecided Status: New -- hal-info update causes resume from suspend issue https://bugs.launchpad.net/bugs/315271 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 202454] Re: Scrolling continues after releasing arrow key
An update to my situation on the MSI Wind: I was wrong when I said "out of the box". I had modified the virtual screen size (Virtual in SubSection Display in xorg.conf) because I had a large external monitor, but the issue manifested even though the external monitor was not activated. Removing the Virtual entry makes the issue disappear. -- Scrolling continues after releasing arrow key https://bugs.launchpad.net/bugs/202454 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 262152] Re: brings up both wired and wireless interfaces; hard to pick just one through the UI
There is a similar report of Fedora: https://bugzilla.redhat.com/show_bug.cgi?id=454955 There the devs say it is intended behavior for NM to connect to all networks that are marked "auto connect". However, I think there should be an option to only allow one connection at a time, with some priorities (eg. wired has more priority than wireless). There are clearly situations were you do not want to have two connections at the same time, like, eg., the one mentioned by Michael Milligan above. Moreover there is a cognitive issue because nm-applet doesn't seem to know what icon to display: a strenght meter or a wire; sometimes it is one and sometimes the other. -- brings up both wired and wireless interfaces; hard to pick just one through the UI https://bugs.launchpad.net/bugs/262152 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 315271] Re: hal-info update causes resume from suspend issue
The bug is fixed for me now, thanks. -- hal-info update causes resume from suspend issue https://bugs.launchpad.net/bugs/315271 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 315271] Re: hal-info update causes resume from suspend issue
Hmmm, I spoke too fast, sometimes when the external monitor is unplugged when I resume from suspend, the internal monitor fails to turn on. It turns on when I plug in the external monitor and activate it with xrandr (I have a keyboard shortcut to activate it so I can do that with the internal screen turned off). Moreover, a rather unhealthy stroboscopic blinking of random white bands occurs on the internal monitor when I go to suspend (it stops when the machine reaches the suspended state). -- hal-info update causes resume from suspend issue https://bugs.launchpad.net/bugs/315271 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 239462] [NEW] [firefox] tooltips disappear too fast
Public bug reported: Binary package hint: firefox Go to (for instance) http://xkcd.org/311/ and place the mouse over the image. A three-lines tooltip appears, but after a few seconds it disappears; I cannot read it entirely. The tooltips should stay displayed longer, or not disappear at all. ** Affects: firefox (Ubuntu) Importance: Undecided Status: New -- [firefox] tooltips disappear too fast https://bugs.launchpad.net/bugs/239462 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 347329] [NEW] ACPI events not correctly handled with KDE4
Public bug reported: OS: Kubuntu Jaunty AMD64 Hardware: Dell Studio Hybrid Problem: Power button actions configured in KDE4 System settings not obeyed In System Settings/Advanced/Power management, I set all profiles to suspend to RAM on pressing power button. However, pressing the power button immediately shuts down the computer. It seems the problem comes from the scripts in /etc/acpi. For instance, /etc/acpi/powerbtn.sh tests conditions that apply to KDE3, not KDE4 (eg. kded instead of kded4, testing for the klaptopdaemon module instead of powerdevil). As none of the conditions apply, the script eventually ends up calling /sbin/shutdown, thus not letting powerdevil handling the event. Workaround: Commenting out the call to /sbin/shutdown, the policy configured in system settings is obeyed. ** Affects: ubuntu Importance: Undecided Status: New -- ACPI events not correctly handled with KDE4 https://bugs.launchpad.net/bugs/347329 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 352353] [NEW] Regression: xrandr doesn't detect native resolution for external LCD
Public bug reported: In Jaunty xrandr doens't mark the native resolution of my external LCD monitor as default. Therefore, using the --auto option switches to a non-native mode. The vide driver is radeon, on an Radeon Mobility X600 board. Here is the output of xrandr just after X is started: Screen 0: minimum 320 x 200, current 1280 x 960, maximum 3840 x 2560 VGA-0 connected 1280x960+0+0 (normal left inverted right x axis y axis) 474mm x 296mm 1680x1050 59.9 1280x1024 75.0 60.0 1280x960 60.0* 1152x864 75.0 1024x768 75.0 70.1 60.0 832x62474.6 800x60072.2 75.0 60.3 56.2 640x48075.0 72.8 66.7 59.9 720x40070.1 DVI-0 disconnected (normal left inverted right x axis y axis) LVDS connected 1280x960+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1920x1200 60.0 + 1920x1080 60.0 1600x1200 60.0 59.9 1680x1050 60.0 1600x1024 60.2 1400x1050 60.0 60.0 1280x1024 59.9 60.0 1440x900 59.9 59.9 1280x960 60.0*59.9 1280x854 59.9 1360x768 59.8 1280x800 59.8 1152x864 60.0 1280x720 59.9 1152x768 59.8 1024x768 60.0 59.9 800x60060.3 59.9 640x48059.9 59.4 S-video disconnected (normal left inverted right x axis y axis) - The list of modes for the VGA-0 output lacks the "+" sign that indicates the default resolution (which is 1680x1050). I also attach the output from xrandr --verbose as it is after I manually set the mode to 1680x1050. Also attached are the xorg log and configuration. Note that this worked fine in 8.10 with the same hardware. ** Affects: ubuntu Importance: Undecided Status: New -- Regression: xrandr doesn't detect native resolution for external LCD https://bugs.launchpad.net/bugs/352353 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 352353] Re: Regression: xrandr doesn't detect native resolution for external LCD
** Attachment added: "xorg.conf" http://launchpadlibrarian.net/24568389/xorg.conf -- Regression: xrandr doesn't detect native resolution for external LCD https://bugs.launchpad.net/bugs/352353 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 352353] Re: Regression: xrandr doesn't detect native resolution for external LCD
** Attachment added: "xrandr-v.txt" http://launchpadlibrarian.net/24568367/xrandr-v.txt -- Regression: xrandr doesn't detect native resolution for external LCD https://bugs.launchpad.net/bugs/352353 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 352353] Re: Regression: xrandr doesn't detect native resolution for external LCD
** Attachment added: "Xorg.0.log" http://launchpadlibrarian.net/24568382/Xorg.0.log -- Regression: xrandr doesn't detect native resolution for external LCD https://bugs.launchpad.net/bugs/352353 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 399782] Re: [karmic] High CPU use on Acer Aspire 4530
I have the same symptoms, but with an R300-based ATI card, using the open-source driver. It seems to be mainly triggered by Eclipse (upstream 3.5), when some progress bars are moving. Shall I file a new bug or do you think it is the same? -- [karmic] High CPU use on Acer Aspire 4530 https://bugs.launchpad.net/bugs/399782 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 399054] [NEW] [Karmic] Frequent freeze on Dell D810
Public bug reported:
System : Dell Latitude D810, Karmic with latest updates as of now.
The system freezes rather frequently when either plugging/unplugging the DC
adapter, or resuming from suspend. When frozen, the HDD led stays lit.
* When the freeze occurs after resuming from suspend, it often results
in a hard lock (magic SysReq keys have no effect). Sometimes, though, it
just freezes for around 30s-1min, and then unfreezes. In these cases,
pressing the caps lock/num lock keys correclty affect the indicator
leds. In these cases, I usually find messages like this in the syslog:
Jul 13 17:15:36 tadzim kernel: [ 4025.000165] ata1.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Jul 13 17:15:46 tadzim kernel: [ 4025.000189] ata1.00: cmd
c8/00:08:9e:11:af/00:00:00:00:00/e0 tag 0 dma 4096 in
Jul 13 17:15:46 tadzim kernel: [ 4025.000193] res
40/00:80:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
Jul 13 17:15:46 tadzim kernel: [ 4025.000201] ata1.00: status: { DRDY }
Jul 13 17:15:46 tadzim kernel: [ 4030.040181] ata1: link is slow to respond,
please be patient (ready=0)
Jul 13 17:15:46 tadzim kernel: [ 4035.024183] ata1: device not ready
(errno=-16), forcing hardreset
Jul 13 17:15:46 tadzim kernel: [ 4035.024275] ata1: soft resetting link
Jul 13 17:15:46 tadzim kernel: [ 4035.206724] ata1.00: configured for UDMA/100
Jul 13 17:15:46 tadzim kernel: [ 4035.206746] ata1: EH complete
* When the freeze occurs when plugging in the DC adapter, parts the desktop are
responsive, apps that are already loaded continue working, however anything
that involves disk activity hangs. Today I had a console open when it occurred,
and I got these results:
- dmesg yields a Bus Error
- hdparm --verbose /dev/sda gives this (I took a picture of the screen and
transcribe it here...):
/de/sda
outgoing cdb: 85 08 2e 00 00 00 00 00 00 00 00 00 00 40 ec 00
SG_IO: ATA_16 status=0x0, host_status=0x4, driver_status=0x0
SG_IO: bad response (not CHECK_CONDITION)
outgoing cdb: 85 08 2e 00 00 00 00 00 00 00 00 00 00 40 a1 00
SG_IO: ATA_16 status=0x0, host_status=0x4, driver_status=0x0
SG_IO: bad response (not CHECK_CONDITION)
HDIO_DRIVE_CMD(identify) failed: Invalid exchange
IO_support= 0 (default)
readonly = 0 (off)
readahead = 6144 (on)
geometry = 19457/255/63, sectors = 312581808, start = 0
Note that these problems also occured with Jaunty, but less frequently
it seems. Please tell me how I can help debugging it.
** Affects: ubuntu
Importance: Undecided
Status: New
--
[Karmic] Frequent freeze on Dell D810
https://bugs.launchpad.net/bugs/399054
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 56765] Re: suspend2ram doesn't resume
Hi, Same symptoms here with a Dell Latitude D810, ATI X600, fglrx 8.28.8 from repository, all the latest packages from edgy (sept 11, 2006), in particular kernel is 2.6.17-7-generic. Additionally, the kernel doesn't react to SysReq keys (tried SysReq-O, SysReq-I). It used to work in dapper but with the 2.6.16.20 kernel, home built. g -- suspend2ram doesn't resume https://launchpad.net/bugs/56765 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 41453] Re: [Bug 41453] Re: Menu/dialog font is huge in Firefox since today's update
No, it is no longer the case anymore... if I remember that was fixed by a subsequent update. g On 9/12/06, Xavier <[EMAIL PROTECTED]> wrote: > Is this still the case ? > You said the font gtk apps were using, but not kde ones. You should choose to > use the same font in gtk style and fonts to have konqueror and synaptic look > the same. > Concerning firefox, it has its own dpi settings, so you will need to check > that. > > -- > Menu/dialog font is huge in Firefox since today's update > https://launchpad.net/bugs/41453 > -- Menu/dialog font is huge in Firefox since today's update https://launchpad.net/bugs/41453 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 57840] Re: X hangs system on switch back
I'm having something similar here but with Edgy: Using 2.6.17-7-generic with fglrx 8.28.8, I cannot switch to console and back to X: systematic hangs. On the other hand, I have no problem with the free ati driver. Is there any useful information I can provide? g -- X hangs system on switch back https://launchpad.net/bugs/57840 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 56765] Re: suspend2ram doesn't resume
The fix also works for me. -- suspend2ram doesn't resume https://launchpad.net/bugs/56765 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 57501] Re: After resume, thinks my wireless network is wired
Same here on a Dell Latitude D810 notebook, with latest kernel (2.6.17-8). Reloading ipw2200/ieee80211 works. Restarting network manager has no effect. -- After resume, thinks my wireless network is wired https://launchpad.net/bugs/57501 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 61652] Re: (Edgy) NetworkManager gets confused if suspend and wakeup swap network interface names
I think this is the same as Bug #57501 -- (Edgy) NetworkManager gets confused if suspend and wakeup swap network interface names https://launchpad.net/bugs/61652 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 56366] Re: knetworkmanager is a misbehaving app according to kwallet
I'm using Edgy with latest updates and I still have this problem sometimes. I'm using a blank password with kwallet. -- knetworkmanager is a misbehaving app according to kwallet https://launchpad.net/bugs/56366 -- kubuntu-bugs mailing list kubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 41015] Re: [ALSA] Master volume control doesn't control Headphone control
I had a similar problem on a Dell Latitude D810 and the hp_mute_led option fixed it. This is with Edgy using 2.6.17-8-generic. Output of lspci -nv attached. ** Attachment added: "Output of lspci -nv" http://librarian.launchpad.net/4392008/41015.lspci -- [ALSA] Master volume control doesn't control Headphone control https://launchpad.net/bugs/41015 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 61803] Volume hotkeys fail when focus is on external display
Public bug reported: Config: Edgy with kernel 2.6.17-8-generic, Dell Latitude D810, KDE, dual head configured with two separate devices, ie. I have two panels, two desktop switchers, two K menus, etc., and I can't drag windows from a desktop to another. For X, I have two display: internal is :0.0 and external is :0.1. Problem: the volume hotkeys don't work if the focused window is on the external display. The volume OSD does not appear and volume is not affected. ** Affects: hotkeys (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => hotkeys -- Volume hotkeys fail when focus is on external display https://launchpad.net/bugs/61803 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 61662] Re: Wacom Volito 2 tablet doesn't work
Same here with a PenPartner. I compiled linuxwacom drivers v0.7.4-3 and it worked. -- Wacom Volito 2 tablet doesn't work https://launchpad.net/bugs/61662 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 53216] Re: BUG() report in getnstimeofday: soft lockup
Same problem here with Edgy and latest updates. Skype 1.3.0_53, kernel 2.6.17-10-generic No VMWare, it was never installed on my machine. For what it's worth, the log shows a firmware error in the wireless card just before the last hang I experienced. I don't know if it was so for all hangs. The hangs occur when certain contacts initiate a chat. It seems that other contacts can initiate a chat without causing any problem, but I'm not 100% sure. I don't know if voice calls cause the hang because I never receive any. Log: Oct 11 18:13:57 localhost kernel: [17198021.764000] ipw2200: Firmware error detected. Restarting. Oct 11 18:13:57 localhost kernel: [17198022.26] ipw2200: Firmware error detected. Restarting. Oct 11 18:13:57 localhost kernel: [17198035.768000] BUG: soft lockup detected on CPU#0! Oct 11 18:13:57 localhost kernel: [17198035.768000] softlockup_tick+0x9f/0xf0 update_process_times+0x31/0x80 Oct 11 18:13:57 localhost kernel: [17198035.768000] smp_apic_timer_interrupt+0x53/0x60 apic_timer_interrupt+0x1c/0x30 -- BUG() report in getnstimeofday: soft lockup https://launchpad.net/bugs/53216 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62816] Re: Print broken in kpdf
Problem still there after update to KDE 3.5.5 -- Print broken in kpdf https://launchpad.net/bugs/62816 -- kubuntu-bugs mailing list kubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 62816] Re: Print broken in kpdf
Confirming that it works for me now -- Print broken in kpdf https://launchpad.net/bugs/62816 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 56651] Re: Impossible to do pairing in Kubuntu
I experienced the problem before, but with latest updates I successfully paired with my phone. I rebooted the machine after the updates. -- Impossible to do pairing in Kubuntu https://launchpad.net/bugs/56651 -- kubuntu-bugs mailing list kubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 41049] Re: Live CD hangs on ThinkPad X31 (Dapper Beta-1)
Same thing here with a Feisty CD on an Athlon 1700+ desktop. I checked the CD for errors and performed a memtest - all ok. Basically the issue is that the CD drive keeps spinning forever, even without launching the installer, and system responsivity gets worse over time, even doing nothing. I tried killing some processes (NetworkManager, screen saver and various other) but nothing improved. How can I know which process is accessing the CD drive? -- Live CD hangs on ThinkPad X31 (Dapper Beta-1) https://bugs.launchpad.net/bugs/41049 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 69631] Re: Kubuntu Edgy font installer not sudo aware
The problem persists on Gutsy -- Kubuntu Edgy font installer not sudo aware https://bugs.launchpad.net/bugs/69631 You received this bug notification because you are a member of Kubuntu Team, which is a bug contact for kdebase in ubuntu. -- kubuntu-bugs mailing list [EMAIL PROTECTED] https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 116416] guidance-power-manager and kpowersave stop working
Public bug reported: Both guidance-power-manager and kpowersave stop working after some time in Feisty (I am not running both at the same time, I just tried one and then the other). In particular, they stop reacting to the lid close event, which is supposed to suspend my laptop. Killing and restarting guidance of kpowersave temporarily solves the problem, until they stop working again. It seems that this is not a HAL nor ACPI problem: the lid button events appear in "lshal -m" and in /var/log/acpid. And I can always suspend by pressing the suspend special key. With guidance, the following lines appears in /var/log/acpid: 8< [Sat May 19 19:57:58 2007] received event "button/lid LID 0080 0008" [Sat May 19 19:57:58 2007] notifying client 5026[0:0] [Sat May 19 19:57:58 2007] notifying client 26392[106:110] [Sat May 19 19:57:58 2007] notifying client 11430[0:0] [Sat May 19 19:57:58 2007] executing action "/etc/acpi/fglrx-powermode.sh" [Sat May 19 19:57:58 2007] BEGIN HANDLER MESSAGES [Sat May 19 19:57:58 2007] END HANDLER MESSAGES [Sat May 19 19:57:58 2007] action exited with status 0 [Sat May 19 19:57:58 2007] executing action "/etc/acpi/lid.sh" [Sat May 19 19:57:58 2007] BEGIN HANDLER MESSAGES ERROR: Couldn't attach to DCOP server! [Sat May 19 19:57:58 2007] END HANDLER MESSAGES [Sat May 19 19:57:58 2007] action exited with status 1 [Sat May 19 19:57:58 2007] completed event "button/lid LID 0080 0008" 8< With kpowersave nothing noteworthy appears. How can I help debug that? ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- guidance-power-manager and kpowersave stop working https://bugs.launchpad.net/bugs/116416 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 116416] guidance-power-manager and kpowersave stop working
You have been subscribed to a public bug: Both guidance-power-manager and kpowersave stop working after some time in Feisty (I am not running both at the same time, I just tried one and then the other). In particular, they stop reacting to the lid close event, which is supposed to suspend my laptop. Killing and restarting guidance of kpowersave temporarily solves the problem, until they stop working again. It seems that this is not a HAL nor ACPI problem: the lid button events appear in "lshal -m" and in /var/log/acpid. And I can always suspend by pressing the suspend special key. With guidance, the following lines appears in /var/log/acpid: 8< [Sat May 19 19:57:58 2007] received event "button/lid LID 0080 0008" [Sat May 19 19:57:58 2007] notifying client 5026[0:0] [Sat May 19 19:57:58 2007] notifying client 26392[106:110] [Sat May 19 19:57:58 2007] notifying client 11430[0:0] [Sat May 19 19:57:58 2007] executing action "/etc/acpi/fglrx-powermode.sh" [Sat May 19 19:57:58 2007] BEGIN HANDLER MESSAGES [Sat May 19 19:57:58 2007] END HANDLER MESSAGES [Sat May 19 19:57:58 2007] action exited with status 0 [Sat May 19 19:57:58 2007] executing action "/etc/acpi/lid.sh" [Sat May 19 19:57:58 2007] BEGIN HANDLER MESSAGES ERROR: Couldn't attach to DCOP server! [Sat May 19 19:57:58 2007] END HANDLER MESSAGES [Sat May 19 19:57:58 2007] action exited with status 1 [Sat May 19 19:57:58 2007] completed event "button/lid LID 0080 0008" 8< With kpowersave nothing noteworthy appears. How can I help debug that? ** Affects: kde-guidance (Ubuntu) Importance: Undecided Status: Unconfirmed -- guidance-power-manager and kpowersave stop working https://bugs.launchpad.net/bugs/116416 -- kubuntu-bugs mailing list [EMAIL PROTECTED] https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 63958] Re: File transfer using fish:// or sftp:// with konqueror is very slow when sending file.
I still have the problem on an up-to-date hardy (kde3). Upload to fish url gives about 1MB/s, while it yields 5MB/s with scp. -- File transfer using fish:// or sftp:// with konqueror is very slow when sending file. https://bugs.launchpad.net/bugs/63958 You received this bug notification because you are a member of Kubuntu Team, which is subscribed to kdebase in ubuntu. -- kubuntu-bugs mailing list [EMAIL PROTECTED] https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 182038] Re: Black rectangle instead of image in FF3 [Hardy]
Bug still occurs with Option "XAANoOffscreenPixmaps" "true" on a fully updated Hardy. It happens a lot less than before, but I just stumbled upon it while reading this page: http://blogs.sun.com/jonathan/ In the April 1st's entry, the Glassfish image sometimes appears with a black band at the bottom. The band disappears a bit when I scroll the image in/out of view, but it usually reappears when I switch tabs. -- Black rectangle instead of image in FF3 [Hardy] https://bugs.launchpad.net/bugs/182038 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 196375] Re: [Hardy] knetworkmanager keeps asking for WEP key although it knows it
I haven't seen the problem in a while. Also, automatic reconnections seem to work more frequently. -- [Hardy] knetworkmanager keeps asking for WEP key although it knows it https://bugs.launchpad.net/bugs/196375 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 128769] Re: [gutsy]knetworkmanager cannot be updated by apt because of the new naming convention
The package network-manager-kde does not seem to contain the actual knetworkmanager executable. The man page is there, the documentation, the configuration, but not the executable. This is the list of installed files: /. /usr /usr/share /usr/share/lintian /usr/share/lintian/overrides /usr/share/lintian/overrides/network-manager-kde /usr/share/linda /usr/share/linda/overrides /usr/share/linda/overrides/network-manager-kde /usr/share/autostart /usr/share/autostart/knetworkmanager-autostart.desktop /usr/share/doc /usr/share/doc/network-manager-kde /usr/share/doc/network-manager-kde/copyright /usr/share/doc/network-manager-kde/changelog.gz /usr/share/doc/network-manager-kde/changelog.Debian.gz /usr/share/man /usr/share/man/man1 /usr/share/man/man1/knetworkmanager.1.gz /usr/share/menu /usr/share/menu/network-manager-kde /etc/dbus-1/system.d/knetworkmanager.conf -- [gutsy]knetworkmanager cannot be updated by apt because of the new naming convention https://bugs.launchpad.net/bugs/128769 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 137753] Re: strigidaemon needs exclude lists, defaults eat up too many resources
Note that by default, strigi also indexes ~/.strigi... that should be on a exclude list. -- strigidaemon needs exclude lists, defaults eat up too many resources https://bugs.launchpad.net/bugs/137753 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 137751] Re: strigidaemon eats up all free disk space
It seems this is the same as Bug #137753 -- strigidaemon eats up all free disk space https://bugs.launchpad.net/bugs/137751 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 130250] Kubuntu Gutsy regression: maximized window underruns panel
Public bug reported: Binary package hint: kdebase In Kubuntu Gutsy freshly installed & updated today, with a dual head configuration, maximized windows on the second head arre bigger than they should, they occupy the height of the whole screen, not taking into account the kde panel. There was a bug report in kde about this problem (http://bugs.kde.org/show_bug.cgi?id=94470), and it has been fixed in KDE 3.5.7. In Kubuntu Feisty with kde 3.5.7, the bug did not happen. ** Affects: kdebase (Ubuntu) Importance: Undecided Status: New -- Kubuntu Gutsy regression: maximized window underruns panel https://bugs.launchpad.net/bugs/130250 You received this bug notification because you are a member of Kubuntu Team, which is a bug contact for kdebase in ubuntu. -- kubuntu-bugs mailing list [EMAIL PROTECTED] https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 46130] Re: kdebluetoothd stops working after suspend-to-disk
The "Cannot connect to SDP server" message still appears with Gutsy. Note that this is a fresh install, so bluetooth does not appear in the STOP_SERVICES of /etc/default/acpi-support -- kdebluetoothd stops working after suspend-to-disk https://bugs.launchpad.net/bugs/46130 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 130253] Kubuntu Gutsy: Volume OSD is too small
Public bug reported: In a freshly installed Kubuntu Gutsy, the Volume OSD (that appears when one uses the volume hot keys) is way too small and can even go unnoticed. In my opinion the size of the OSD in Feisty was right. ** Affects: Ubuntu Importance: Undecided Status: New -- Kubuntu Gutsy: Volume OSD is too small https://bugs.launchpad.net/bugs/130253 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 61803] Re: Volume hotkeys fail when focus is on external display
On Gutsy, I still cannot adjust audio volume using the hot keys when focus is on the secondary head. -- Volume hotkeys fail when focus is on external display https://bugs.launchpad.net/bugs/61803 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 122652] Re: [Gutsy Tribe 2] Widescreen (19") and ATI Radeon w/ ati driver causes horizontal lines in bottom left corner
I am not sure it is related, but my Dell D810 laptop (ATI Mobility X600 w/ open source drivers) worked well until +/- last Friday (Aug. 17). Now I do have some garbage on my main display, while the external display obviously misses some drawing. It seems the drawing that doesn't go to the external display does go to the internal display but in a garbled form. I can see it very clearly when I move windows on the external screen. Note that this is a dual-head configuration. -- [Gutsy Tribe 2] Widescreen (19") and ATI Radeon w/ ati driver causes horizontal lines in bottom left corner https://bugs.launchpad.net/bugs/122652 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 122652] Re: [Gutsy Tribe 2] Widescreen (19") and ATI Radeon w/ ati driver causes horizontal lines in bottom left corner
I downgraded to xserver-xorg-video-ati 6.6.3 from 6.6.193 and my problem went away. Shall I file a separate bug for this issue? -- [Gutsy Tribe 2] Widescreen (19") and ATI Radeon w/ ati driver causes horizontal lines in bottom left corner https://bugs.launchpad.net/bugs/122652 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 70299] Re: Font in firefox is bold since upgrade
I am using Kubuntu Gutsy from some time and I had no problem with the Firefox fonts, until I installed ubuntu-desktop. Now Firefox fonts are huge, but no other application seems to be affected. I uninstalled ubuntu-desktop and most of its dependencies, I also uninstalled and reinstalled firefox, deleted the .mozilla directory, but fonts are still huge. The attached screenshot shows firefox and synaptic. Fonts in Synaptic are as expected, but in firefox they are so huge that tabs look weird. ** Attachment added: "Screenshot of firefox with huge fonts" http://launchpadlibrarian.net/8955646/firefox-fonts.png -- Font in firefox is bold since upgrade https://bugs.launchpad.net/bugs/70299 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 70299] Re: Font in firefox is bold since upgrade
hmmm I uninstalled some more packages and rebooted the machine, and now firefox fonts are back to normal... -- Font in firefox is bold since upgrade https://bugs.launchpad.net/bugs/70299 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 116416] Re: guidance-power-manager and kpowersave stop working
This problem is still present in Gutsy. Is there something I can do to help resolve it? -- guidance-power-manager and kpowersave stop working https://bugs.launchpad.net/bugs/116416 You received this bug notification because you are a member of Kubuntu Team, which is a bug contact for kde-guidance in ubuntu. -- kubuntu-bugs mailing list [EMAIL PROTECTED] https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 13671] Re: slocate daily anacron job makes system feel slow
I tried to measure the impact of ionice on updatedb when running in parallel with a full Eclipse workspace rebuild, a CPU- and disk-intensive process. Results below, there are two measurements per item (this is Gutsy on a Pentium M 2GHz notebook, 7200RPM disk): Build alone: 50s, 52s Build with updatedb: 3min20s, 5min17s Build with ionice -c3 updatedb: 4min30s, 2min44s So there appears to be only a minimal improvement with ionice, if there is an improvement at all (given the variability of the result, I would have to perform more measurements per item). The man page of ionice states that it works with the CFQ IO scheduler. How do I know which scheduler I am running, and how do I change it? I think it would be really nice to solve this updatedb issue, as it really does give users a negative sensation. I use to completely disable updatedb when I install Ubuntu for non-geeks. Anyway, I think most non- geeks will never use locate... -- slocate daily anacron job makes system feel slow https://bugs.launchpad.net/bugs/13671 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 123752] Re: [needs-packaging] rlocate should be available as an slocate replacement
There's this entry: https://wiki.ubuntu.com/RLocate But it is quite old... I agree that rlocate would be a very welcome improvement. -- [needs-packaging] rlocate should be available as an slocate replacement https://bugs.launchpad.net/bugs/123752 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 13671] Re: slocate daily anacron job makes system feel slow
Well I could have searched a bit myself: it seems I am using the CFQ scheduler: $ cat /sys/block/sda/queue/scheduler noop anticipatory deadline [cfq] (I guess the brackets show the selected scheduler). So it seems that ionice is not doing its job properly. Any idea about why? This is the command I used to launch updatedb: $ sudo /usr/bin/ionice -c3 updatedb My /etc/updatedb.conf specifies a niceness of 10. -- slocate daily anacron job makes system feel slow https://bugs.launchpad.net/bugs/13671 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 130253] Re: Kubuntu Gutsy: Volume OSD is too small
Okay, I've had a look at the kmilo code. It seems the OSD is configurable through skins, however the choice of the skin is hardcoded. A possibility would be: - implement several skins (for now there is only one in the kmilo code base, I guess the skin used in Kubuntu simply replaces the default skin of kmilo) - add a configuration module for kmilo where one can choose the skin; that module would be available from the KDE system settings window. I can do that, but I would like to know if it would be welcome by the kubuntu maintainers; otherwise I'll just compile another skin and replace kmilo on my own box, without creating a config module. -- Kubuntu Gutsy: Volume OSD is too small https://bugs.launchpad.net/bugs/130253 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 130253] Re: Kubuntu Gutsy: Volume OSD is too small
I have a 1920x1200 screen. On that screen the OSD is really small. Where is the code that handles this? Maybe I can try to see if I can implement some way to configure it. -- Kubuntu Gutsy: Volume OSD is too small https://bugs.launchpad.net/bugs/130253 You received this bug notification because you are a member of Kubuntu Team, which is a bug contact for kdelibs in ubuntu. -- kubuntu-bugs mailing list [EMAIL PROTECTED] https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 118718] Re: gdesklets crashing when loading desklet
*** This bug is a duplicate of bug 116712 *** https://bugs.launchpad.net/bugs/116712 Looks like the same as Bug #123598 -- gdesklets crashing when loading desklet https://bugs.launchpad.net/bugs/118718 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 85081] Re: Dual head broken in Feisty
I ust removed the HorizSync and VertRefresh lines I had to add, and it works now. So I guess some update fixed the problem. Thanks. -- Dual head broken in Feisty https://bugs.launchpad.net/bugs/85081 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 83637] Re: Network-manager doesn't show any wireless network on ipw2200
Since the last few days I have not experienced the problematic behavior so it seems an update did some magic here. This bug seems to be resolved for me (crossing fingers...) -- Network-manager doesn't show any wireless network on ipw2200 https://bugs.launchpad.net/bugs/83637 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [EMAIL PROTECTED] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 183969] Re: xserver-xorg-core update breaks java & wxwidgets apps
In Hardy, the latest version of xserver-xorg-core (1.4.1~git20080105-1ubuntu2) causes the same problem. Downgrading to 1.4.1~git20080105-1ubuntu1 solves the problem: wget http://archive.ubuntu.com/ubuntu/pool/main/x/xorg-server/xserver-xorg-core_1.4.1~git20080105-1ubuntu1_i386.deb sudo dpkg -i xserver-xorg-core_1.4.1~git20080105-1ubuntu1_i386.deb -- xserver-xorg-core update breaks java & wxwidgets apps https://bugs.launchpad.net/bugs/183969 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 194797] Re: [kubuntu hardy] Cannot set volume higher than 48% with hot keys
Ah yes, now that you say it I have something similar here: using the hot keys adjust both volume and something named "3d control - depth", and when the latter reaches 100% the volume doesn't increase. (besides, I have no idea what this 3d control - depth does...) This is hardy with latest updates. -- [kubuntu hardy] Cannot set volume higher than 48% with hot keys https://bugs.launchpad.net/bugs/194797 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 196375] [NEW] [Hardy] knetworkmanager keeps asking for WEP key although it knows it
Public bug reported: Binary package hint: knetworkmanager This is a somewhat random bug in Kubuntu Hardy. Quite often, when the network manager tries to connect to my WEP-encrypted network, the connection attemp times out on DHCP and then knetworkmanager pops up the "Connect to wireless network" dialog where I must enter the WEP key (which seem to indicate that it tried to configure the network interface with a wrong key, hence the DHCP timeout). The funny thing is that in the dialog's passphrase/key field, my hex key is already correctly filled in. The only thing that is incorrect is that the encryption type is set to WEP passphrase instead of WEP hex. I just have to select WEP hex in the combo and validate, and the connection succeeds. Now the strange thing is that it doesn't happen all the time. Typically it happens when I first start the computer. Then I can suspend/resume many times without problems. It just happens sometimes... How can I help debug this? ** Affects: knetworkmanager (Ubuntu) Importance: Undecided Status: New -- [Hardy] knetworkmanager keeps asking for WEP key although it knows it https://bugs.launchpad.net/bugs/196375 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 201005] [NEW] OpenOffice does not save background image of master slide
Public bug reported: Kubuntu Hardy, OpenOffice 2.4.0~rc2-1ubuntu3 Steps to reproduce: - Create a new presentation - Go to View > Master > Slide Master - Right click on the slide, then Slide > Set background picture for slide... - Select some picture: the picture appears as the master slide's background, and thus as all slides' background - Save presentation (in odp format) - Close OpenOffice - Reopen the presentation: no more background picture Ironically, if you save the presentation as ppt instead of odp, the background picture is saved all right... ** Affects: ubuntu Importance: Undecided Status: New -- OpenOffice does not save background image of master slide https://bugs.launchpad.net/bugs/201005 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 200813] Re: dead keys broken in hardy
Confirmed here, Kubuntu Hardy. -- dead keys broken in hardy https://bugs.launchpad.net/bugs/200813 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 201281] [NEW] katapult shows up on wrong display
Public bug reported: Kubuntu Hardy, katapult 0.3.2.1-3 Dual monitor setup with xrandr * Current behavior Katapult always shows up on the display on which it was started: - Open konsole - drag the konsole window to display 1 - start katapult from konsole => pressing alt+space opens katapult on display 1 - Kill katapult - drag the same konsole window to display 2 - start katapult => katapult always shows up on display 2 * Expected behavior Katapult opens on the display I am looking at. For instance this could be based on where the mouse pointer is, or which window has the focus. ** Affects: ubuntu Importance: Undecided Status: New -- katapult shows up on wrong display https://bugs.launchpad.net/bugs/201281 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 199679] Re: [ipw2200] Cannot connect to hidden ssid with network-manager >=0.6.6-0ubuntu1
Hi, the situation is a bit random for me, using the branch (fetched today). NM usually fails to connect once, then causes the applet to ask for the WEP key again, then succeeds. Everytime it fails I notice that the DHCP daemon is not even starting. I attach the syslog. ** Attachment added: "Syslog of connection attempts" http://launchpadlibrarian.net/12920632/syslog -- [ipw2200] Cannot connect to hidden ssid with network-manager >=0.6.6-0ubuntu1 https://bugs.launchpad.net/bugs/199679 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 194797] [NEW] [kubuntu hardy] Cannot set volume higher than 48% with hot keys
Public bug reported: Kubuntu Hardy, updated from gutsy. Title says it all: using the volume hotkeys, I cannot set the audio volume past 48%. If I set it to 100% using kmix, pressing the volume down key works as expected, but then again the volume up key cannot get it past 48%. If I set it again to 100% using kmix and then press the volume up key, the volume immediately gets down to 48% I think the package is kmilo. ** Affects: kdeutils (Ubuntu) Importance: Undecided Status: Confirmed -- [kubuntu hardy] Cannot set volume higher than 48% with hot keys https://bugs.launchpad.net/bugs/194797 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 199679] [NEW] [ipw2200] Cannot connect with network manager 0.6.6-0ubuntu1
Public bug reported: Binary package hint: network-manager As per https://bugs.launchpad.net/ubuntu/+source/network- manager/+bug/199066/comments/13 Network manager (0.6.6-0ubuntu1) fails to connect to my WEP-encrypted network. This is with Kubuntu Hardy. Chip is Intel Corporation PRO/Wireless 2915ABG I can connect manually using iwconfig/dhclient: sudo iwconfig eth1 essid key sudo dhclient eth1 Attached is my complete /var/log/syslog. Latest failed connection attempt around 20:26. Can I provide more information? ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New -- [ipw2200] Cannot connect with network manager 0.6.6-0ubuntu1 https://bugs.launchpad.net/bugs/199679 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 199679] Re: [ipw2200] Cannot connect with network manager 0.6.6-0ubuntu1
** Attachment added: "/var/log/syslog" http://launchpadlibrarian.net/12510236/syslog -- [ipw2200] Cannot connect with network manager 0.6.6-0ubuntu1 https://bugs.launchpad.net/bugs/199679 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 189805] Re: kpowersave shows wrong battery status
Indeed it seems to work for me now. Thanks! -- kpowersave shows wrong battery status https://bugs.launchpad.net/bugs/189805 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 182038] Re: Black rectangle instead of image in FF3 [Hardy]
The new xulrunner-1.9 (1.9~b5+nobinonly-0ubuntu1) does not solve the problem for me. I have a fully updated kubuntu hardy, with firefox b5. Video board is: ATI Technologies Inc M24 1P [Radeon Mobility X600], driver is ati r300 I'm not using compiz or any other compositing WM. Test case: http://virtualnorthstar.org/. Two images appear fully black -- Black rectangle instead of image in FF3 [Hardy] https://bugs.launchpad.net/bugs/182038 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 182038] Re: Black rectangle instead of image in FF3 [Hardy]
Yes disabling offscreen pixmaps indeed solves the issue. I just hope it has no adverse side effects. -- Black rectangle instead of image in FF3 [Hardy] https://bugs.launchpad.net/bugs/182038 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 199066] Re: wireless support broken since 0.6.6~rc2
It's also broken here, with 0ubuntu3. The kde nm applet just asks for password again and again, but connection is never established. The relevant (I guess) part of the log is that: Mar 6 11:03:40 tadzim NetworkManager: SUP: sending command 'INTERFACE_ADD eth1^I^Iwext^I/var/run/wpa_supplicant0^I' Mar 6 11:03:40 tadzim NetworkManager: SUP: response was 'OK' Mar 6 11:03:41 tadzim NetworkManager: SUP: sending command 'AP_SCAN 1' Mar 6 11:03:41 tadzim NetworkManager: SUP: response was 'OK' Mar 6 11:03:41 tadzim NetworkManager: SUP: sending command 'ADD_NETWORK' Mar 6 11:03:41 tadzim NetworkManager: SUP: response was '0' Mar 6 11:03:41 tadzim NetworkManager: SUP: sending command 'SET_NETWORK 0 ssid 74616e676f' Mar 6 11:03:41 tadzim NetworkManager: SUP: response was 'OK' Mar 6 11:03:41 tadzim NetworkManager: SUP: sending command 'SET_NETWORK 0 scan_ssid 1' Mar 6 11:03:41 tadzim NetworkManager: SUP: response was 'OK' Mar 6 11:03:41 tadzim NetworkManager: SUP: sending command 'SET_NETWORK 0 key_mgmt NONE' Mar 6 11:03:41 tadzim NetworkManager: SUP: response was 'OK' Mar 6 11:03:41 tadzim NetworkManager: SUP: sending command 'SET_NETWORK 0 wep_key0 ' Mar 6 11:03:41 tadzim NetworkManager: SUP: response was 'OK' Mar 6 11:03:41 tadzim NetworkManager: SUP: sending command 'SET_NETWORK 0 wep_tx_keyidx 0' Mar 6 11:03:41 tadzim NetworkManager: SUP: response was 'OK' Mar 6 11:03:41 tadzim NetworkManager: SUP: sending command 'ENABLE_NETWORK 0' Mar 6 11:03:41 tadzim NetworkManager: SUP: response was 'OK' Mar 6 11:03:41 tadzim NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) complete. Mar 6 11:03:41 tadzim avahi-daemon[5371]: Joining mDNS multicast group on interface eth1.IPv6 with address fe80::213:ceff:fe3a:3deb. Mar 6 11:03:41 tadzim avahi-daemon[5371]: New relevant interface eth1.IPv6 for mDNS. Mar 6 11:03:41 tadzim avahi-daemon[5371]: Registering new address record for fe80::213:ceff:fe3a:3deb on eth1.*. Mar 6 11:03:44 tadzim NetworkManager: Old device 'eth1' activating, won't change. Then it keeps saying the last message until the next time the applet asks for password. I can connect manualy (iwconfig/dhclient) without problem -- wireless support broken since 0.6.6~rc2 https://bugs.launchpad.net/bugs/199066 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 199066] Re: wireless support broken since 0.6.6~rc2
I'm having the problem with the ipw2200 driver, so it's not madwifi- specific. -- wireless support broken since 0.6.6~rc2 https://bugs.launchpad.net/bugs/199066 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 189805] Re: kpowersave shows wrong battery status
I have a similar problem on my Hardy install. Neither kpowersave nor guidance-power-manager report correct battery information. However, using the acpi command reports the correct state. Restarting kpowersave of guidance-power-manager doesn't change the situation. I get the following messages when starting kpowersave, which seem to indicate the problem is dbus-related: kpowersave: WARNING: Unknown error while aquire org.freedesktop.Policy.Power interface kpowersave: ERROR: Could not send dbus message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. kpowersave: WARNING: Property: power_management.can_standby for: /org/freedesktop/Hal/devices/computer doesn't exist. kpowersave: WARNING: Property: battery.serial for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Property: battery.charge_level.capacity_state for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Property: battery.charge_level.unit for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Couldn't request charge_level.unit for udi: /org/freedesktop/Hal/devices/computer_power_supply_0 kpowersave: WARNING: Property: battery.charge_level.design for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Property: battery.remaining_time for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Property: battery.serial for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Property: battery.charge_level.capacity_state for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Property: battery.charge_level.unit for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Couldn't request charge_level.unit for udi: /org/freedesktop/Hal/devices/computer_power_supply_0 kpowersave: WARNING: Property: battery.charge_level.design for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Property: battery.remaining_time for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. -- kpowersave shows wrong battery status https://bugs.launchpad.net/bugs/189805 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 83623] Re: NetworkManager hangs with 100% cpu
I have the same symptoms in Feisty. It does not happen all the time, but it is quite frequent. What information would help resolve this? -- NetworkManager hangs with 100% cpu https://bugs.launchpad.net/bugs/83623 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 79599] Re: System very slow to suspend to RAM (Feisty)
Problem persists with 2.6.20-9. The system is usable for 25 seconds after the suspend key is pressed, then the screen goes black and it takes 11 more seconds until the status led indicates standby mode. Total 37 seconds to suspend. uname -a: Linux tadzim 2.6.20-9-generic #2 SMP Mon Feb 26 03:01:44 UTC 2007 i686 GNU/Linux lspci and dmidecode are attached. ** Attachment added: "Output of 'sudo dmidecode'" http://librarian.launchpad.net/6558056/bug79599-dmidecode.txt -- System very slow to suspend to RAM (Feisty) https://launchpad.net/bugs/79599 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 79599] Re: System very slow to suspend to RAM (Feisty)
** Attachment added: "Output of 'sudo lspci -vvn'" http://librarian.launchpad.net/6558057/bug79599-lspci.txt -- System very slow to suspend to RAM (Feisty) https://launchpad.net/bugs/79599 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 85081] Re: Dual head broken in Feisty
By "after that" do you mean after applying the workaround I mentioned? I have everything working as usual after applying the workaround. This is dual-head mode, not xinerama. I don't know if this is mergedfb. How do I find out if I have a working mergedfb? -- Dual head broken in Feisty https://launchpad.net/bugs/85081 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 83637] Re: Network-manager doesn't show any wireless network on ipw2200
Here is an extract from my system log, that occured when I resumed the machine. The machine was resumed at 15:05. At first nm-tool did not list eth1 (my ipw2200). At 15:07 I did the module unload/reload trick, and NM grabbed the network. I did not find anything obviously wrong in the log file, but maybe somebody in the know can sort it out. uname -a Linux tadzim 2.6.20-9-generic #2 SMP Mon Feb 26 03:01:44 UTC 2007 i686 GNU/Linux My wired card is a Tigon3. Is there any additional information I can provide? ** Attachment added: "Syslog extract" http://librarian.launchpad.net/6610575/bug83637-syslog.txt -- Network-manager doesn't show any wireless network on ipw2200 https://launchpad.net/bugs/83637 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 92563] x broken in feisty with radeon driver
Public bug reported: After updating my Feisty install today and rebooting, X fails to start. First it complained that it could not load the xinerama module so I commented it out in the modules section. Then I get the following error (the full error log is attached, here are xorg's last words): -- Backtrace: 0: /usr/bin/X11/X(xf86SigHandler+0x81) [0x80c5d81] 1: [0xe420] 2: /usr/lib/xorg/modules/drivers//radeon_drv.so [0xb7afa574] 3: /usr/lib/xorg/modules/drivers//radeon_drv.so(RADEONPreInit+0x137f) [0xb7afd86 f] 4: /usr/bin/X11/X(InitOutput+0x9aa) [0x80a5baa] 5: /usr/bin/X11/X(main+0x27b) [0x807456b] 6: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xdc) [0xb7ceaebc] 7: /usr/bin/X11/X(FontFileCompleteXLFD+0x1e1) [0x8073ab1] Fatal server error: Caught signal 11. Server aborting --- I'm using the fglrx driver meanwhile, which seems to work without problem. ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- x broken in feisty with radeon driver https://launchpad.net/bugs/92563 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 92563] Re: x broken in feisty with radeon driver
** Attachment added: "Full X server log" http://librarian.launchpad.net/6824660/Xorg.0.log.old -- x broken in feisty with radeon driver https://launchpad.net/bugs/92563 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 92563] Re: x broken in feisty with radeon driver
Disabling MergedFB solves the problem, thanks! -- x broken in feisty with radeon driver https://launchpad.net/bugs/92563 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 100011] Re: Feisty: kde power manager settings no longer enforced
I forgot to mention that I can suspend using the suspend hot key. -- Feisty: kde power manager settings no longer enforced https://launchpad.net/bugs/100011 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 100011] Feisty: kde power manager settings no longer enforced
Public bug reported: Binary package hint: kde-guidance-powermanager Up to a few days ago the settings of KDE Power manager were enforced: I had configured suspend on lid close and hibernate when battery drops below 5min. Now those settings are no longer enforced: when I close the lid the screen turns off but the machine does not suspend, and I experienced once that the machine ran out of battery power and simply turned off instead of hibernating. How can I help testing? ** Affects: kde-guidance (Ubuntu) Importance: Undecided Status: Unconfirmed -- Feisty: kde power manager settings no longer enforced https://launchpad.net/bugs/100011 -- kubuntu-bugs mailing list kubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 89291] Re: Kubuntu Feisty does not ask for bluetooth pin. Pinhelpers seem not to work
Still no luck after restarting the machine. I do not see any pinhelper or passkey-agent process (tried 'ps aux |grep pin' and 'ps aux |grep pass'). When is the pin helper started? How can I start it by hand? -- Kubuntu Feisty does not ask for bluetooth pin. Pinhelpers seem not to work https://launchpad.net/bugs/89291 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 89291] Re: Kubuntu Feisty does not ask for bluetooth pin. Pinhelpers seem not to work
I was able to pair with my phone starting passkey-agent by hand. So the problem is that passkey-agent is not started on boot. Which script is in charge of starting the passkey-agent? Software versions: bluez-utils 3.9-0ubuntu2 bluez-pin 0.30-2.1ubuntu3 kdebluetooth 0.99+1.0beta2-1ubuntu5 -- Kubuntu Feisty does not ask for bluetooth pin. Pinhelpers seem not to work https://launchpad.net/bugs/89291 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 100011] Re: Feisty: kde power manager settings no longer enforced
I don't know what update caused it but it is working correctly on my machine now. -- Feisty: kde power manager settings no longer enforced https://bugs.launchpad.net/bugs/100011 You received this bug notification because you are a member of Kubuntu Team, which is a bug contact for kde-guidance in ubuntu. -- kubuntu-bugs mailing list kubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 89291] Re: Kubuntu Feisty does not ask for bluetooth pin. Pinhelpers seem not to work
In today's updates there was a mention of a change regarding pin helper in bluetooth packages: debian/patches/010-kubuntu-pin-helper.patch: - updated for with 3.9 As far as I'm concerned I still cannot pair with my bluetooth phone (SonyEricsson K700i). I also tried "security auto" in hcid.conf so that the local pin is used, but I still could not connect. Is there something special to do to use the pin stored in /etc/bluetooth/pin or the one in "passkey" in hcid.conf? -- Kubuntu Feisty does not ask for bluetooth pin. Pinhelpers seem not to work https://launchpad.net/bugs/89291 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 94083] [Feisty] 2.6.20-12 does not boot
Public bug reported: My machine fails to boot after updating to kernel 2.6.20-12. The exact error message wasn't written to the log but it was something along the lines of "udevd-event: execution of /sbin/modprobe failed". It seems this occurred while the kernel was initializing the USb subsystem. I can boot wihtout problem with 2.6.20-11. ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- [Feisty] 2.6.20-12 does not boot https://launchpad.net/bugs/94083 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 94083] Re: [Feisty] 2.6.20-12 does not boot
** Attachment added: "Output of 'sudo lspci -vv'" http://librarian.launchpad.net/6874300/bug94083-vv.txt -- [Feisty] 2.6.20-12 does not boot https://launchpad.net/bugs/94083 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 94083] Re: [Feisty] 2.6.20-12 does not boot
** Attachment added: "Output of 'sudo lspci -vvn'" http://librarian.launchpad.net/6874302/bug94083-vvn.txt -- [Feisty] 2.6.20-12 does not boot https://launchpad.net/bugs/94083 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 94083] Re: [Feisty] 2.6.20-12 does not boot
Note that this dmesg output is with the booted 2.6.20-11 kernel. As for the log with 2.6.20-12 I cannot have it, it seems the error occurs before the disks are mounted. ** Attachment added: "Output of 'sudo dmesg'" http://librarian.launchpad.net/6874293/bug94083-dmesg.txt -- [Feisty] 2.6.20-12 does not boot https://launchpad.net/bugs/94083 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 94083] Re: [Feisty] 2.6.20-12 does not boot
** Attachment added: "/boot/grub/menu.lst" http://librarian.launchpad.net/6874574/menu.lst -- [Feisty] 2.6.20-12 does not boot https://launchpad.net/bugs/94083 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 94083] Re: [Feisty] 2.6.20-12 does not boot
Which package should I reinstall to reinstall modprobe? Meanwhile I reinstalled linux-image-2.6.20-12-generic, and I get the following warning message during install: Your /etc/kernel-img.conf needs to be updated. Read grub's NEWS.Debian[1] file and follow its instructions. 1. /usr/share/doc/grub/NEWS.Debian.gz You shouldn't call /sbin/update-grub. Please call /usr/sbin/update-grub instead! I'll reboot now and try to grab the log... -- [Feisty] 2.6.20-12 does not boot https://launchpad.net/bugs/94083 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
