Bug#419182: kiax: sound quality very poor compared to skype

[Mikael Magnusson]

[EMAIL PROTECTED] wrote:

Package: kiax
Version: 0.8.51.dfsg-2-1
Severity: normal

I can't figure it out. I have skype 1.3.0.53 and the sound quality for a 
test call is almost crystal clear. When I try to use kiax with 
iax.fwdnet.net, the sound quality is so bad as to be unusable.


Initially I suspected that I was getting poor sound quality due to 
network delay so I registered two computers on my local LAN with FWD. I 
called from one to the other. Now, if I understand FWD correctly, the 
audio data is routed directly between the callers (not through FWD) so 
this test should eliminate all network delay. Still, I found the sound 
quality unchanged -- very poor. I tried GSM, speex, and ULaw. I turned 
off all the audio filters and silence detection. It still sounded 
terrible.


Any suggestions would be welcome. I loath to use Skype because it is 
proprietary software and IAX should be superior.




When comparing the sound quality of skype and kiax you should have in 
mind that skype uses a (prioprietary) wideband codec in contrast to kiax 
which uses a sample rate of 8000 samples per second.


You should compare kiax to another softphones using 8k samplerate. For 
example twinkle which also supports wideband speex codecs. IAX doesn't 
support wideband codecs.


Mikael


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#291134: forward from upstream author Gerd Neugebauer

[Chris Bainbridge]

Forwarded from upstream author Gerd Neugebauer regarding this bug:

"Thanks for the hint. I consider this behaviour a feature and not a bug.
Sorting is simply sorting and no magic is involved. If you sort want to
follow the rules of BibTeX you have to specify a proper sorting order
(aka sort.key). This is described in section 1.2.7 of the BibTool manual."


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420254: Partman does not show partition table

[Michael Junker]

Package: installation-reports

Boot method: CD
Image version:
http://cdimage.debian.org/debian-cd/4.0_r0/i386/iso-cd/debian-40r0-i386-busi
nesscard.iso
Date: 20-Apr-2007

Machine: DELL, Inspiron 8600
Processor: Pentium M, 1.7 GHz
Memory: 1GB
Partitions: 

Primary 567.5 MB B fat32
Unused space 8 GB
Primary 29.6 GB ntfs
Primary 15.6 GB ntfs
Logical 26.3 GB ntfs

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:   [O]
Detect network card:[O]
Configure network:  [O]
Detect CD:  [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives:  [E]
Install base system:[ ]
Clock/timezone setup:   [ ]
User/password setup:[ ]
Install tasks:  [ ]
Install boot loader:[ ]
Overall install:[ ]

Comments/Problems:

Partman displayed my hard disk correctly. I have chosen a manual
partitioning. Partman did NOT display my current partitions. Instead it
offered to create a new partition table.

I suspect partman is unable to create a logical partition in the free space
(in that particular situation).
However, I suggest handling the situation by an error message instead of
offering to create an new partition table.
An error message might say something like: strange partitioning found.
Cannot work on that. 

Of course, I would like dearest that partman is able, to create logical
partitions in that situation. 

Bug#420255: Partman does not use free space to create partition

[Michael Junker]

Package: installation-reports

Boot method: CD
Image version:
http://cdimage.debian.org/debian-cd/4.0_r0/i386/iso-cd/debian-40r0-i386-busi
nesscard.iso
Date: 20-Apr-2007

Machine: DELL, Inspiron 8600
Processor: Pentium M, 1.7 GHz
Memory: 1GB
Partitions: 

Primary 567.5 MB B fat32
Unused space 8 GB 37.6 GB 
Primary 15.6 GB ntfs
Logical 26.3 GB ntfs

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:   [O]
Detect network card:[O]
Configure network:  [O]
Detect CD:  [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives:  [E]
Install base system:[ ]
Clock/timezone setup:   [ ]
User/password setup:[ ]
Install tasks:  [ ]
Install boot loader:[ ]
Overall install:[ ]

Comments/Problems:

Steps / observations
1. Partman displayed my hard disk correctly. 
2. I have chosen a manual partitioning. 
3. Partman displayed my current partitioning. 
4. I created successfully a partition in the unused space: primary 8 GB,
ext3 on /
5. Partman did not allow to create an other partition (for swap) in the rest
of the unused space.

I suspect partman is unable to create a logical partition in the free space
(in that particular situation). 
(Having a good bunch of RAM, that does not hurt me to much).

Bug#420193: libsane on sparc64 with SCSI scanner

[BERTRAND Joël]

Julien BLACHE a écrit :

BERTRAND Joël <[EMAIL PROTECTED]> wrote:


I use a Snapscan 1236s with xsane on an i386 (K6-III/400, 256 MB,
Adaptec 2940U, kernel 2.6.20.1) without any trouble. If I use the same
scanner on an U2 (2xUltraSPARC-II/296 MHz, 2 GB, Happymeal-ESP, kernel
2.6.21-rc7), sane-find-scanner does not find any scanner but this
scanner is shown in /proc/scsi/scsi. Both stations run lenny.


OK after a quick check, this was discussed back in january 2003.


I have seen this archive.


The Linux SG3 interface does not work properly when a 32bit app is
talking to a 64bit kernel.


	Maybe. But with 2.6.20.3 kernel, on the same sparc, I can use this 
scanner (with libsane that comes with sarge), but system is not stable. 
I don't see any diff on sg driver between 2.6.20.3 and 2.6.21-rc7.



You can either:
 - try to do a 64bit build of sane-backends
 - try to use the old SG interface, if still exists/works

Unfortunately, both options are unfit for Debian; 64bit binaries would
require to rebuild all the dependency chain, and using the old SG
interface won't last long :/


Thus, any issue or workaround ?

Regards,

JKB

Bug#403887: libgnutls failes to parse OpenSSL generated certificates

[Andreas Metzler]

On 2007-04-18 Max Kellermann <[EMAIL PROTECTED]> wrote:
> reopen 403887
> thanks

> On 2007/04/15 14:03, Debian Bug Tracking System <[EMAIL PROTECTED]> wrote:
> > your patch is part of upstream's 1.6.1 release which has been uploaded
> > to sid as 1.6.1-2.

> The files have been patched, but upstream has forgotten to regenrate
> lib/pkix_asn1_tab.c from pkix.asn,
[...]
> I could fix that by manually deleting lib/pkix_asn1_tab.c before
> running dpkg-buildpackage.

Thanks for keeping an eye on that. It seems to be fixed in upstream
CVS nowadays  (both in HEAD and gnutls_1_6_x branch).

cu andreas
-- 
`What a good friend you are to him, Dr. Maturin. His other friends are
so grateful to you.'
`I sew his ears on from time to time, sure'


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420256: Bindgraph does not create rrd files.

[[EMAIL PROTECTED]]

Package: bindgraph
Version: 0.2-5
Severity: normal


Bindgraph does not create rrd files. In etc/default/bindgraph LOG_FORMAT field 
was changed from "bind93" to "bind92"
 but there is no success after change. Respectively web page stays without 
images [ http://webserver/cgi-bin/bindgraph.cgi ],
 the apache error log does not show serious error.

here is the cutted part from bind93 logfile : 
---
21-Apr-2007 10:39:41.911 client 213.240.249.93#2927: query: typhon IN A +
21-Apr-2007 10:39:41.991 client 213.240.249.93#2928: query: typhon IN A +
21-Apr-2007 10:39:42.114 client 213.240.249.93#2929: query: typhon IN A +
21-Apr-2007 10:39:42.159 client 213.240.249.93#2930: query: typhon IN A +
21-Apr-2007 10:39:42.211 client 213.240.249.93#2931: query: typhon IN A +
21-Apr-2007 10:39:42.408 client 213.240.249.93#2955: query: typhon IN A +
21-Apr-2007 10:39:47.301 client 213.240.249.67#1718: query: www.varnacity.info 
IN A +
21-Apr-2007 10:39:48.316 client 213.240.249.67#1718: query: www.ida.bg IN A +
21-Apr-2007 10:39:48.562 client 213.240.249.67#1718: query: news.varnacity.info 
IN A +
21-Apr-2007 10:39:48.652 client 213.240.249.66#1477: query: ns.aska.com.ua IN A 
+
--

this is bingraph conf file : 

xxx:~# cat /etc/default/bindgraph 
DNS_LOG=/var/log/bind9-query.log
LOG_FORMAT=bind92
-
 
-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.11.5-vs-MiCRo
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages bindgraph depends on:
ii  debconf [debconf-2.0] 1.5.11 Debian configuration management sy
ii  libfile-tail-perl 0.98-5 File::Tail perl module
ii  librrds-perl  1.2.15-0.3 Time-series data storage and displ

Versions of packages bindgraph recommends:
ii  apache [httpd]1.3.34-4.1 versatile, high-performance HTTP s
ii  bind9 1:9.3.4-2  Internet Domain Name Server

-- debconf information:
* bindgraph/logfile: /var/log/bind9-query.log
* bindgraph/configure_bind:
* bindgraph/stay_on_purge: false
* bindgraph/start_on_boot: true


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420242: [Pkg-xfce-devel] Bug#420242: xfce4-screenshooter-plugin: Creates Screenshot.png on "Cancel"

[Yves-Alexis Perez]

tag #420242 confirmed patch pending
thanks

On ven, 2007-04-20 at 20:36 -0500, Owen Heisler wrote:
> Package: xfce4-screenshooter-plugin
> Version: 1.0.0-2
> Severity: normal
> 
> This version of the screenshot plugin creates a screenshot file even 
> when it is canceled.
> 
> To reproduce:
> 1.Add the plugin to the panel.
> 2.Click the icon to take a screenshot.
> 3.Decide not to take a screenshot: click Cancel.
> 4.~/Screenshot.png is created anyway.
> 

I had already noticed that but never took the time to investigate. If
found a way to fix this, which I've sent for review upstream. Patch is
already waiting in our svn for the next upload.

Regards,
-- 
Yves-Alexis
--- panel-plugin/screenshooter.c.old	2006-04-23 19:12:15.0 +0200
+++ panel-plugin/screenshooter.c	2007-04-21 09:03:14.0 +0200
@@ -274,6 +274,8 @@
 if (gtk_dialog_run (GTK_DIALOG (sd->chooser)) == GTK_RESPONSE_ACCEPT)
 {
 filename = gtk_file_chooser_get_filename (GTK_FILE_CHOOSER(sd->chooser));
+} else {
+  g_free(filename);
 }
 gtk_widget_hide (GTK_WIDGET (sd->chooser));
 }

Bug#419163: education-standalone: Recommends tetex- packages, which should become transitional packages

[Petter Reinholdtsen]

[Luca Brivio]
> The package now in sid Recommends: tetex-base, tetex-bin,
> tetex-brev, tetex-doc, tetex-extra. However they are becoming
> transitional packages depending on texlive- packages, because tetex
> is no longer maitained upstream. I think this should be fixed,
> because of the issues it causes when (dist-)upgrading.

OK.  Except for tetex-brev, what is required to get a full latex
environment installed with texlive?  At the moment we have this
section in the task:

  Suggests:tetex-bin, tetex-doc, tetex-base, tetex-extra, lacheck, \
   auctex, tetex-brev
  Why: Requested by math teacher.  LaTeX allow math typesetting.

What should be list instead?

Friendly,
-- 
Petter Reinholdtsen


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420258: openttd: [INTL:sv] Swedish debconf templates translation

[Daniel Nylander]

Package: openttd
Severity: wishlist
Tags: patch l10n


Here is the Swedish debconf translation for openttd

Regards,
Daniel

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.17.4
Locale: LANG=sv_SE, LC_CTYPE=sv_SE (charmap=UTF-8) (ignored: LC_ALL set to 
sv_SE)
Shell: /bin/sh linked to /bin/bash
# Swedish translation for openttd debconf template.
# Copyright (C) 2007 Free Software Foundation, Inc.
# This file is distributed under the same license as the openttd package.
# Daniel Nylander <[EMAIL PROTECTED]>, 2007.
#
msgid ""
msgstr ""
"Project-Id-Version: openttd\n"
"Report-Msgid-Bugs-To: [EMAIL PROTECTED]"
"POT-Creation-Date: 2007-03-08 15:39+0100\n"
"PO-Revision-Date: 2007-04-21 10:15+0100\n"
"Last-Translator: Daniel Nylander <[EMAIL PROTECTED]>\n"
"Language-Team: Swedish <[EMAIL PROTECTED]>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Type: note
#. Description
#: ../templates:1001
msgid "You need to install data files"
msgstr "Du behöver installera datafilerna"

#. Type: note
#. Description
#: ../templates:1001
msgid "OpenTTD needs the data files from the original Transport Tycoon Deluxe 
game to run. You should install these data files before you can play the game. 
See README.Debian for more details on which files need to be copied where."
msgstr "OpenTTD behöver datafilerna från det ursprungliga spelet Transport 
Tycoon Deluxe för att kunna köras. Du måste installera dessa datafiler innan du 
kan spela spelet. Se README.Debian för fler detaljer om vilka filer som behöver 
kopieras."

Bug#420257: bash: redirection outlasts loop with failing brace expansion

[Jasen Betts]

Package: bash
Version: 2.05b-26
Severity: normal


try the following commands:

echo $$
bash 
echo $$
cat  /usr/games/xxx
> /usr/games/fortune
> EOF
[EMAIL PROTECTED]:~$ while read a b ; do echo ${a:5:-6} ; done 

Bug#390552: closed by "Adam Cécile (Le_Vert)" <[EMAIL PROTECTED]> ()

[Loïc Minier]

Hi,

On Sat, Apr 21, 2007, Debian Bug Tracking System wrote:
> From: "Adam Cécile (Le_Vert)" <[EMAIL PROTECTED]>
> Date: Mon, 2 Oct 2006 03:59:13 +0200
> To: [EMAIL PROTECTED]
> User-Agent: KMail/1.9.4
[ empty ]

 Yesterday, Alan Baghumian added the package to pkg-gnome and requested
 sponsoring; could you explain why you closed the bug?  Is it ok to
 reopen it now and close it in a couple of days when we upload the
 package?  Or did you plan uploading it?

   Bye,
-- 
Loïc Minier

Bug#420259: rott: [INTL:sv] Swedish debconf templates translation

[Daniel Nylander]

Package: rott
Severity: wishlist
Tags: patch l10n


Here is the Swedish debconf translation for rott

Regards,
Daniel

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.17.4
Locale: LANG=sv_SE, LC_CTYPE=sv_SE (charmap=UTF-8) (ignored: LC_ALL set to 
sv_SE)
Shell: /bin/sh linked to /bin/bash
# Swedish translation for rott debconf template.
# Copyright (C) 2007 Free Software Foundation, Inc.
# This file is distributed under the same license as the rott package.
# Daniel Nylander <[EMAIL PROTECTED]>, 2007.
#
msgid ""
msgstr ""
"Project-Id-Version: rott\n"
"Report-Msgid-Bugs-To: [EMAIL PROTECTED]"
"POT-Creation-Date: 2007-02-22 12:19+0100\n"
"PO-Revision-Date: 2007-04-21 10:17+0100\n"
"Last-Translator: Daniel Nylander <[EMAIL PROTECTED]>\n"
"Language-Team: Swedish <[EMAIL PROTECTED]>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Type: boolean
#. Description
#: ../templates:1001
msgid "Download shareware data files?"
msgstr "Hämta datafiler från sharewareversionen?"

#. Type: boolean
#. Description
#: ../templates:1001
msgid "Rise of the Triad requires additional data files which are not available 
under a free software license and cannot be distributed by Debian. You may 
choose to automatically download the shareware data files from the internet and 
install them into your system now."
msgstr "Rise of the Triad kräver ytterligare datafiler som inte finns 
tillgängliga under en fri programvarulicens och kan inte distribueras av 
Debian. Du kan välja att automatiskt hämta ner datafilerna från 
sharewareversionen från Internet och installera dem på ditt system."

#. Type: boolean
#. Description
#: ../templates:1001
msgid "The installation will require about 15 MB of free disk space."
msgstr "Installationen kräver ungefär 15 MB ledigt utrymme på din hårddisk."

Bug#420193: libsane on sparc64 with SCSI scanner

[Julien BLACHE]

BERTRAND Joël <[EMAIL PROTECTED]> wrote:

Hi,

>> The Linux SG3 interface does not work properly when a 32bit app is
>> talking to a 64bit kernel.
>
>   Maybe. But with 2.6.20.3 kernel, on the same sparc, I can use
> this scanner (with libsane that comes with sarge), but system is not
> stable. I don't see any diff on sg driver between 2.6.20.3 and
> 2.6.21-rc7.

Have you diffed the 2 libsane versions yet ? (the backend you're using
+ common code in sanei/ for a start)

>> You can either:
>>  - try to do a 64bit build of sane-backends
>>  - try to use the old SG interface, if still exists/works
>>
>> Unfortunately, both options are unfit for Debian; 64bit binaries would
>> require to rebuild all the dependency chain, and using the old SG
>> interface won't last long :/
>
>   Thus, any issue or workaround ?

No, not at the moment, I'm afraid. Can you try to run the libsane
version from sarge on the sparc and see if it still works ?

JB.

-- 
 Julien BLACHE <[EMAIL PROTECTED]>  |  Debian, because code matters more 
 Debian & GNU/Linux Developer|   
 Public key available on  - KeyID: F5D6 5169 
 GPG Fingerprint : 935A 79F1 C8B3 3521 FD62 7CC7 CD61 4FD7 F5D6 5169 

Bug#420260: spamassassin: mkdir /nonexistent: Permission denied at /usr/share/perl5/Mail/SpamAssassin.pm line 1530

[Francesco P. Lovergine]

Package: spamassassin
Version: 3.1.7-2
Severity: normal

When using spamd child processes run as 'nobody' users who has no home
dir. That causes a permission denied error in creation of bayesian
filtering files, as explained here for instance:

http://lists.debian.org/debian-user/2007/01/msg03725.html

Adding something like:

--virtual-config-dir=/var/cache/spamassassin

to OPTIONS in /etc/default/spamassassin with nobody owning that dir
would be appropriate. It would be better also creating a system spamd user
with appropriate home and shell, instead of using nobody.


-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.18-4-686 (SMP w/1 CPU core)
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) (ignored: 
LC_ALL set to [EMAIL PROTECTED])
Shell: /bin/sh linked to /bin/bash


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#356399: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=356399

[Yves-Alexis Perez]

Hi,

sorry for the extra-long delay to answer this bug :)
Is this still relevant (in Sarge/oldstable or in Etch/stable)? Is the
package "menu" installed?

Regards,
-- 
Yves-Alexis



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#367616: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=367616

[Yves-Alexis Perez]

Hi,

sorry for the extra-long delay. Is the bug still relevant with the
current Xfce version?

Regards,
-- 
Yves-Alexis



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420262: havp: [debconf_rewrite] Debconf templates review

[Christian Perrier]

Package: havp
Version: N/A
Severity: normal
Tags: patch

Dear Debian maintainer,

On Sunday, April 08, 2007, I notified you of the beginning of a review process
concerning debconf templates for havp.

The debian-l10n-english contributors have now reviewed these templates,
and the proposed changes are attached to this bug report.

Please review the suggested changes are suggested, and if you have any
objections, let me know in the next 3 days.

Please try to avoid uploading havp with these changes right now.

The second phase of this process will begin on Tuesday, April 24, 2007, when I 
will
coordinate updates to translations of debconf templates.

The existing translators will be notified of the changes: they will
receive an updated PO file for their language.

Simultaneously, a general call for new translations will be sent to
the debian-i18n mailing list.

Both these calls for translations will request updates to be sent as
individual bug reports. That will probably trigger a lot of bug
reports against your package, but these should be easier to deal with.

The call for translation updates and new translations will run until
Sunday, May 06, 2007. Please avoid uploading a package with fixed or changed
debconf templates and/or translation updates in the meantime. Of
course, other changes are safe.

On Monday, May 07, 2007, I will contact you again and will send a final patch
summarizing all the updates (changes to debconf templates,
updates to debconf translations and new debconf translations).

Again, thanks for your attention and cooperation.


-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.18-4-486
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
--- 
/home/bubulle/travail/debian/rewrite/LCFC/havp/havp.old/debian/havp.templates.master
2007-04-05 22:58:03.196143462 +0200
+++ 
/home/bubulle/travail/debian/rewrite/LCFC/havp/havp/debian/havp.templates.master
2007-04-21 10:47:03.893959358 +0200
@@ -1,19 +1,30 @@
+# These templates have been reviewed by the debian-l10n-english
+# team
+#
+# If modifications/additions/rewording are needed, please ask
+# for an advice to [EMAIL PROTECTED]
+#
+# Even minor modifications require translation updates and such
+# changes should be coordinated with translators and reviewers.
+
 Template: havp/loopback_mount
 Type: boolean
 Default: true
-_Description: Do you want to create a loopback spool filesystem?
+_Description: Do you want to create a loopback spool file system?
  HAVP strictly requires the file system where it stores its temporary files
  during scanning to support mandatory locking. Many of the standard Linux
  file systems support this, but do not enable it by default. 
  .
- To use HAVP, there are two options: either mount the filesystem that contains
- /var/spool/havp with the option "mand", or create a loopback filesystem that
- is mounted at /var/spool/havp only for HAVP. Answer yes to this question if
- you don't know what this is about or don't care, but answer no if you need
- high performance.
+ To use HAVP, you can either mount the file system that contains
+ /var/spool/havp with the option "mand", or create a loopback file system that
+ is mounted at /var/spool/havp only for HAVP.
+ .
+ If you are in doubt, you should accept this option to create a
+ loopback spool file system.
 
 Template: havp/loopback_size
 Type: string
 Default: 100
-_Description: Which size should the loopback filesystem have?
- Please enter the size of the loopback filesystem to be created in MB.
+_Description: Loopback file system size:
+ Please enter the size (in megabytes) of the loopback file system to
+ be created.
--- /home/bubulle/travail/debian/rewrite/LCFC/havp/havp.old/debian/control  
2007-04-05 22:58:03.180143322 +0200
+++ /home/bubulle/travail/debian/rewrite/LCFC/havp/havp/debian/control  
2007-04-09 19:45:07.479994452 +0200
@@ -16,18 +16,3 @@
  main aims are continuous, non-blocking downloads and smooth scanning of
  dynamic and password protected HTTP traffic. Havp antivirus proxy has a
  parent and transparent proxy mode. It can be used with squid or standalone.
- .
-  - HTTP Antivirus proxy
-  - Scans complete incoming traffic
-  - Nonblocking downloads 
-  - Smooth scanning of dynamic and password protected traffic 
-  - Can used with squid or other proxy
-  - Parent proxy support
-  - Transparent proxy support
-  - Logfile
-  - Process change to defined user and group
-  - Daemon
-  - Use Clamav (GPL antivirus)
-  - Operating System: Linux 
-  - Written in C++
-  - Released under GPL

debian-bugs-dist@lists.debian.org

[Joshua Dunamis -]

Excuse me, I don't know how to run it. If I try with sh this is the
output:

[EMAIL PROTECTED]:~$ sudo /usr/share/bug/xserver-xorg-core/script 3>&1
/usr/share/bug/xserver-xorg-core/script: line 16: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 17: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 22: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 31: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 37: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 38: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 39: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 40: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 53: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 56: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 57: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 62: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 65: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 66: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 67: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 72: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 80: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 86: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 87: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 88: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 89: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 90: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 91: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 92: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 97: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 102: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 103: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 104: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 107: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 108: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 109: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 118: 3: Descrittore di file non 
valido


On Friday 20 April 2007, alle 20:26, Julien Cristau wrote:
> Subject: Re: Bug#420177: libdrm2: the output of my 
> /usr/share/bug/xserver-xorg-core/script 3>&1
> From: Julien Cristau <[EMAIL PROTECTED]>
> Date: Fri, 20 Apr 2007 20:26:23 +0200
> To: Joshua Dunamis <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
> X-Operating-System: Linux 2.6.18-4-686 i686
> User-Agent: Mutt/1.5.13 (2006-08-11)
> 
> On Fri, Apr 20, 2007 at 20:15:39 +0200, Joshua Dunamis wrote:
> 
> > Package: libdrm2
> > Version: 2.3.0-4
> > Followup-For: Bug #420177
> > 
> > 
> > As requested I put the output of my
> > /usr/share/bug/xserver-xorg-core/script 3>&1
> > 
> What you sent is actually the *contents* of this file.  You need to run
> this script, and it will output your X config and log, which is the
> information we need.
> 
> Thanks,
> Julien




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#363748: Update on this bug

[Alexander Sack]

On Sat, Apr 21, 2007 at 07:53:21AM +0200, Sven Joachim wrote:
> Anyway, I downgraded the severity to wishlist, since this is probably not
> a bug after all.  Feel free to close it altogether if you don't want it 
> to lie around.
> 

One more thing, please keep the bug title in subject ... I hate
getting bugmail without seeing the title ;).

Thanks,

 - Alexander



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#371844: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=371844

[Yves-Alexis Perez]

Hi,

is this bug still relevant with Xfce 4.4.1 available (maybe soon) in
unstable?

Regards,
-- 
Yves-Alexis



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#418430: [Debian-hebrew-common] Re: [Debian-hebrew-package] Bug#418430: mixed hebrew/english spell checking is needed

[Diego Iastrubni]

for kde4, there is a system which can determinate the language, and then pass 
it to the correct spell checker. english will not be sent to hspell.

the violation of the policy is a good point. but i am pretty sure we are in 
some gray area.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#363748: Update on this bug

[Alexander Sack]

On Sat, Apr 21, 2007 at 07:53:21AM +0200, Sven Joachim wrote:
> Anyway, I downgraded the severity to wishlist, since this is probably not
> a bug after all.  Feel free to close it altogether if you don't want it 
> to lie around.
> 

If you set it to wishlist, please state an explicit wish. I still
don't see what the behaviour should be in your opinion. I doubt that
people would like their clipboard gets overwritten when you select
some text somewhere (e.g. bug in terminals/X?). Same I doubt that you
want firefox to paste the mouse-selection if you press Ctrl-V (which
would be a wishlist for firefox).

 - Alexander



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420193: libsane on sparc64 with SCSI scanner

[BERTRAND Joël]

Julien BLACHE a écrit :

BERTRAND Joël <[EMAIL PROTECTED]> wrote:

Hi,


The Linux SG3 interface does not work properly when a 32bit app is
talking to a 64bit kernel.

Maybe. But with 2.6.20.3 kernel, on the same sparc, I can use
this scanner (with libsane that comes with sarge), but system is not
stable. I don't see any diff on sg driver between 2.6.20.3 and
2.6.21-rc7.


Have you diffed the 2 libsane versions yet ? (the backend you're using
+ common code in sanei/ for a start)


	No, I don't, because I have to find a couple libsane/kernel that works 
on sparc64 and another that doesn't work, and I cannot reboot my U2 only 
to make test.



You can either:
 - try to do a 64bit build of sane-backends
 - try to use the old SG interface, if still exists/works

Unfortunately, both options are unfit for Debian; 64bit binaries would
require to rebuild all the dependency chain, and using the old SG
interface won't last long :/

Thus, any issue or workaround ?


No, not at the moment, I'm afraid. Can you try to run the libsane
version from sarge on the sparc and see if it still works ?


	I have tried, but without success. I have tried 1.0.14, 1.0.16 and 
1.0.18. Maybe, like mysql-server bug on sparc64, trouble comes from 
glibc or dark side of kernel itself...


Regards,

JKB

Bug#420263: linux-image-2.6.18-k7-4: Some kernel modules won't load from time to time

[Jan Heitkoetter]

Package: linux-image-2.6.18-k7-4
Version: linux-image-2.6.18-4-k7
Severity: important


>From time to time it is impossible to load some kernel modules, notably 
sound modules and the nvidia kernel module. The output in 
/var/log/messages looks like this:

kernel: snd_rawmidi: Unknown symbol snd_seq_device_new
kernel: snd_rawmidi: Unknown symbol snd_seq_device_new
kernel: snd_mpu401_uart: Unknown symbol snd_rawmidi_receive
kernel: snd_mpu401_uart: Unknown symbol snd_rawmidi_transmit_ack
kernel: snd_mpu401_uart: Unknown symbol snd_rawmidi_transmit_peek
kernel: snd_mpu401_uart: Unknown symbol snd_rawmidi_new
kernel: snd_mpu401_uart: Unknown symbol snd_rawmidi_set_ops
kernel: snd_rawmidi: Unknown symbol snd_seq_device_new
kernel: snd_emu10k1: Unknown symbol snd_rawmidi_receive
kernel: snd_emu10k1: Unknown symbol snd_rawmidi_transmit
kernel: snd_emu10k1: Unknown symbol snd_seq_device_new
kernel: snd_emu10k1: Unknown symbol snd_rawmidi_new
kernel: snd_emu10k1: Unknown symbol snd_rawmidi_set_ops
kernel: snd_rawmidi: Unknown symbol snd_seq_device_new
kernel: snd_mpu401_uart: Unknown symbol snd_rawmidi_receive
kernel: snd_mpu401_uart: Unknown symbol snd_rawmidi_transmit_ack
kernel: snd_mpu401_uart: Unknown symbol snd_rawmidi_transmit_peek
kernel: snd_mpu401_uart: Unknown symbol snd_rawmidi_new
kernel: snd_mpu401_uart: Unknown symbol snd_rawmidi_set_ops
kernel: snd_mpu401: Unknown symbol snd_mpu401_uart_new
(I've left out the timestamp and hostname.)

In the example above the sound device is rendered unusable since it is 
impossible to modprobe snd_emu10k1 manually, it will just throw the same  
error messages as above. Rebooting usually fixes the problem.

I've also experienced this problem with the nvidia module, but with 
snd_emu10k1 it has happened several times.

-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-k7
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=UTF-8)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#374158: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=374158

[Yves-Alexis Perez]

Compositing tab is now always present, allowing you to force the
compositing to be enabled. Does it satisfies you, and can I close this
bug?

Regards,
-- 
Yves-Alexis



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#381680: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=381680

[Yves-Alexis Perez]

reassign #381680 gtk-qt-engine
thanks

To gtk-qt-engine maintainer: I forward this bug because I guess your
package creates the faulty file. Feel free to ask precisions about this.

If this bug still happens, it lies in gtk-qt-engine, which shouldn't
statically create a ~/.gtkrc-2.0. I have heard that it may have been
fixed upstream (kde creating a .gtkrc-2.O.kde or something like that),
but I don't really know.

Regards,
-- 
Yves-Alexis



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420265: cpufreqd: not work perfectly on battery

[giggz]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Subject: cpufreqd: not work perfectly on battery
Package: cpufreqd
Version: 2.2.1-2
Severity: normal

*** Please type your report below this line ***
HI,

Since fews days i notice that cpufreqd doesn't work perfectly anymore.

For example :
It works perfectly on ac=on (performance or ondemand...I have changed it
in /etc/cpufreqd.conf in order to test it).
It doesn't work anymore on battery. On ac=off my laptop is always in
performance mode or in performance low when cpu is too hot.
I noticed that the movie watcher profile doesn't work anymore too.

THw for your work
Guillaume

Here is my /etc/cpufreqd.conf

# this is a comment
# see CPUFREQD.CONF(5) manpage for a complete reference
#
# Note: ondemand/conservative Profiles are disabled because
#   they are not available on many platforms.

[General]
pidfile=/var/run/cpufreqd.pid
poll_interval=2
verbosity=4
#enable_remote=1
#remote_group=root
[/General]

#[acpi]
#acpid_socket=/var/run/acpid.socket
#[/acpi]

#[nforce2_atxp1]
#vcore_path=/some/path
#vcore_default=1500
#[/nforce2_atxp1]

#[sensors_plugin]
#sensors_conf=/some/file
#[/sensors_plugin]

[Profile]
name=On Demand High
minfreq=40%
maxfreq=100%
policy=ondemand
[/Profile]

#[Profile]
#name=On Demand Low
#minfreq=20%
#maxfreq=80%
#policy=ondemand
#[/Profile]

[Profile]
name=Performance High
minfreq=100%
maxfreq=100%
policy=performance
#exec_post=echo 8 > /proc/acpi/sony/brightness
[/Profile]

[Profile]
name=Performance Low
minfreq=80%
maxfreq=80%
policy=performance
[/Profile]

[Profile]
name=Powersave High
minfreq=60%
maxfreq=60%
policy=powersave
[/Profile]

[Profile]
name=Powersave Low
minfreq=40%
maxfreq=40%
policy=powersave
[/Profile]

#[Profile]
#name=Conservative High
#minfreq=33%
#maxfreq=100%
#policy=conservative
#[/Profile]
#
#[Profile]
#name=Conservative Low
#minfreq=0%
#maxfreq=66%
#policy=conservative
#[/Profile]

##
# Basic states
##
# when AC use performance mode
[Rule]
name=AC Rule
ac=on# (on/off)
#profile=Performance High
profile=On Demand High
[/Rule]

# stay in performance mode for the first minutes
[Rule]
name=AC Off - High Power
ac=off   # (on/off)
battery_interval=70-100
#exec_post=echo 5 > /proc/acpi/sony/brightness
profile=On Demand High
#profile=Performance Low
[/Rule]

# conservative mode when not AC
[Rule]
name=AC Off - Medium Battery
ac=off   # (on/off)
battery_interval=30-70
#exec_post=echo 3 > /proc/acpi/sony/brightness
profile=Powersave High
[/Rule]

# conservative mode when not AC
[Rule]
name=AC Off - Low Battery
ac=off   # (on/off)
battery_interval=0-30
#exec_post=echo 3 > /proc/acpi/sony/brightness
profile=Powersave Low
[/Rule]

##
# Special Rules
##
# CPU Too hot!
[Rule]
name=CPU Too Hot
acpi_temperature=55-100
cpu_interval=50-100
profile=Performance Low
[/Rule]

# use performance mode if I'm watching a movie
# I don't care for batteries!
# But don't heat too much.
[Rule]
name=Movie Watcher
programs=mplayer,gmplayer,totem
battery_interval=0-100
acpi_temperature=0-60
cpu_interval=0-100
profile=Performance High
[/Rule]




- -- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.20.7-1 (PREEMPT)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages cpufreqd depends on:
ii  libc6 2.5-2  GNU C Library: Shared libraries
ii  libcpufreq0   002-2  shared library to deal with
the cp
ii  libsensors3   1:2.10.1-3 library to read
temperature/voltag
ii  libsysfs2 2.1.0-1interface library to sysfs
ii  lsb-base  3.1-23.1   Linux Standard Base 3.1
init scrip

Versions of packages cpufreqd recommends:
ii  acpid 1.0.4-7.1  Utilities for using ACPI
power man

- -- debconf information:
  cpufreqd/no_procfs_sysfs:
  cpufreqd/no_pm:
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQFGKdTfRvQAQ6Awr6YRAinyAKCv9pU3CcG545chZm466bipebPpgQCePQoD
B+1Gz7DygGijq0UmtClxWLM=
=F37Y
-END PGP SIGNATURE-


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420264: kcheckgmail: Crash on startup on amd64

[Cameron Dale]

Package: kcheckgmail
Version: 0.5.5-2
Severity: important


The application crashes on startup after upgrading my system to the latest 
unstable. kcheckgmail was not 
upgraded, but libssl was (libssl0.9.8 0.9.8c-3 => 0.9.8e-4). If you need the 
full list of what was upgraded, 
let me know.

Here is the relevant stuff in .xsession-errors:

kcheckgmail: [void KCheckGmailTray::slotLoginStart()]
kcheckgmail: [void GMail::login()] Waiting for wallet...
kcheckgmail: [bool GMailWalletManager::get()]
kcheckgmail: [bool GMailWalletManager::get()] yeah, from wallet
kcheckgmail: [bool GMailWalletManager::get()] wallet NOT open, callback
kcheckgmail: [bool GMailWalletManager::getWallet()]
kcheckgmail: [bool GMailWalletManager::getWallet()] it's enabled
kcheckgmail: [void GMailWalletManager::openWallet()] calling openWallet
kcheckgmail: [void GMailWalletManager::openWallet()] connecting wallet
kcheckgmail: [bool GMailWalletManager::get()] return true
kcheckgmail: [void GMailWalletManager::slotWalletChangedStatus()]
kcheckgmail: [void GMailWalletManager::slotWalletChangedStatus()]
kcheckgmail: [void GMailWalletManager::slotWalletChangedStatus()] Wallet Open!
kcheckgmail: [void GMailWalletManager::slotWalletChangedStatus()] Setting folder
kcheckgmail: [void GMailWalletManager::slotWalletChangedStatus()] Password:
kcheckgmail: [void GMailWalletManager::slotWalletChangedStatus()] Got pass: 

kcheckgmail: Sending login: Email=***&Passwd=**&null=Sign%20in
kcheckgmail: [void GMailWalletManager::clearPassword()]
kdecore (KLibLoader): WARNING: KLibrary: /usr/lib/libcrypto.so.0.9.8: undefined 
symbol: PKCS7_content_free
kdecore (KLibLoader): WARNING: KLibrary: /usr/lib/libcrypto.so.0.9.8: undefined 
symbol: OpenSSL_add_all_algorithms
kdecore (KLibLoader): WARNING: KLibrary: /usr/lib/libcrypto.so.0.9.8: undefined 
symbol: OPENSSL_add_all_algorithms
kdecore (KLibLoader): WARNING: KLibrary: /usr/lib/libcrypto.so.0.9.8: undefined 
symbol: OpenSSL_add_all_algorithms_c
onf


And here is the backtrace:

(no debugging symbols found)
Using host libthread_db library "/lib/libthread_db.so.1".
(no debugging symbols found)
[line repeated 31 times]
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread 47794266555024 (LWP 30234)]
(no debugging symbols found)
[line repeated 20 times]
(no debugging symbols found)
[KCrash handler]
#5  0x2b77f5f74ab9 in QString::fromUtf8 () from /usr/lib/libqt-mt.so.3
#6  0x2b77f5f7a07a in QString::sprintf () from /usr/lib/libqt-mt.so.3
#7  0x00414733 in ?? ()
#8  0x00417008 in ?? ()
#9  0x00418241 in ?? ()
#10 0x2b77f5c72c2e in QObject::activate_signal ()
   from /usr/lib/libqt-mt.so.3
#11 0x2b77f40bca8c in KIO::Job::result () from /usr/lib/libkio.so.4
#12 0x2b77f40fdadf in KIO::Job::emitResult () from /usr/lib/libkio.so.4
#13 0x2b77f411a19a in KIO::SimpleJob::slotFinished ()
   from /usr/lib/libkio.so.4
#14 0x2b77f411a7ea in KIO::TransferJob::slotFinished ()
   from /usr/lib/libkio.so.4
#15 0x2b77f40fd748 in KIO::TransferJob::qt_invoke ()
   from /usr/lib/libkio.so.4
#16 0x2b77f5c72c2e in QObject::activate_signal ()
   from /usr/lib/libqt-mt.so.3
#17 0x2b77f5c737be in QObject::activate_signal ()
   from /usr/lib/libqt-mt.so.3
#18 0x2b77f410bb3d in KIO::SlaveInterface::dispatch ()
   from /usr/lib/libkio.so.4
#19 0x2b77f4113a8d in KIO::SlaveInterface::dispatch ()
   from /usr/lib/libkio.so.4
#20 0x2b77f40c8dca in KIO::Slave::gotInput () from /usr/lib/libkio.so.4
#21 0x2b77f41021e8 in KIO::Slave::qt_invoke () from /usr/lib/libkio.so.4
#22 0x2b77f5c72c2e in QObject::activate_signal ()
   from /usr/lib/libqt-mt.so.3
#23 0x2b77f5c73617 in QObject::activate_signal ()
   from /usr/lib/libqt-mt.so.3
#24 0x2b77f5fe0c68 in QSocketNotifier::activated ()
   from /usr/lib/libqt-mt.so.3
#25 0x2b77f5c94534 in QSocketNotifier::event ()
   from /usr/lib/libqt-mt.so.3
#26 0x2b77f5c0e26a in QApplication::internalNotify ()
   from /usr/lib/libqt-mt.so.3
#27 0x2b77f5c10014 in QApplication::notify () from /usr/lib/libqt-mt.so.3
#28 0x2b77f4fda8be in KApplication::notify ()
   from /usr/lib/libkdecore.so.4
#29 0x2b77f5ba1802 in QApplication::sendEvent ()
   from /usr/lib/libqt-mt.so.3
#30 0x2b77f5c00ee1 in QEventLoop::activateSocketNotifiers ()
   from /usr/lib/libqt-mt.so.3
#31 0x2b77f5bb5565 in QEventLoop::processEvents ()
   from /usr/lib/libqt-mt.so.3
#32 0x2b77f5c277f6 in QEventLoop::enterLoop () from /usr/lib/libqt-mt.so.3
#33 0x2b77f5c275ff in QEventLoop::exec () from /usr/lib/libqt-mt.so.3
#34 0x2b77f5c0fd48 in QApplication::exec () from /usr/lib/libqt-mt.so.3
#35 0x0040d6d3 in ?? ()
#36 0x2b77f7e18314 in __libc_start_main () from /lib/libc.so.6
#37 0x0040d4aa in ?? ()
#38 0x7fffb6c9c528 in ?? ()
#39 0x in ?? ()


-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (990, 'unst

Bug#420266: hylafax-server: IMPRIP should point to the location in a Debian system

[Hans-Joachim Zierke]

Package: hylafax-server
Version: 2:4.3.1-7
Severity: minor


IMPRIP line in /etc/hylafax/setup.cache should point to /usr/bin/psrip,
where the program is located within a Debian system.

-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)

Versions of packages hylafax-server depends on:
ii  adduser  3.102   Add and remove users and groups
ii  debconf [debconf 1.5.11  Debian configuration management sy
ii  gs-esp [gs]  8.15.3.dfsg.1-1 The Ghostscript PostScript interpr
ii  hylafax-client   2:4.3.1-7   Flexible client/server fax softwar
ii  libc62.3.6.ds1-13GNU C Library: Shared libraries
ii  libgcc1  1:4.1.1-21  GCC support library
ii  libpam0g 0.79-4  Pluggable Authentication Modules l
ii  libstdc++6   4.1.1-21The GNU Standard C++ Library v3
ii  libtiff-tools3.8.2-7 TIFF manipulation and conversion t
ii  libtiff4 3.8.2-7 Tag Image File Format (TIFF) libra
ii  lsb-base 3.1-23.1Linux Standard Base 3.1 init scrip
ii  mailx1:8.1.2-0.20050715cvs-1 A simple mail user agent
ii  metamail 2.7-52  implementation of MIME
ii  psmisc   22.3-1  Utilities that use the proc filesy
ii  sed  4.1.5-1 The GNU sed stream editor
ii  sharutils1:4.2.1-15  shar, unshar, uuencode, uudecode
ii  zlib1g   1:1.2.3-13  compression library - runtime

Versions of packages hylafax-server recommends:
ii  metamail  2.7-52 implementation of MIME

-- debconf information:
  hylafax-server/attachment:
  hylafax-server/start_now: true
  hylafax-server/setup_failed:


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420193: libsane on sparc64 with SCSI scanner

[Julien BLACHE]

BERTRAND Joël <[EMAIL PROTECTED]> wrote:

Hi,

>> Have you diffed the 2 libsane versions yet ? (the backend you're using
>> + common code in sanei/ for a start)
>
>   No, I don't, because I have to find a couple libsane/kernel
> that works on sparc64 and another that doesn't work, and I cannot
> reboot my U2 only to make test.

No, I meant looking at the code in both SANE versions and see if
there's anything that rings a bell in the diff.

>> No, not at the moment, I'm afraid. Can you try to run the libsane
>> version from sarge on the sparc and see if it still works ?
>
>   I have tried, but without success. I have tried 1.0.14, 1.0.16
> and 1.0.18. Maybe, like mysql-server bug on sparc64, trouble comes
> from glibc or dark side of kernel itself...

Ouch! So libsane from sarge works on an older kernel, and doesn't work
on the newer one ?

JB.

-- 
 Julien BLACHE <[EMAIL PROTECTED]>  |  Debian, because code matters more 
 Debian & GNU/Linux Developer|   
 Public key available on  - KeyID: F5D6 5169 
 GPG Fingerprint : 935A 79F1 C8B3 3521 FD62 7CC7 CD61 4FD7 F5D6 5169 

Bug#420268: gforge-mta-exim: exim 3 is going away, please take care of that

[Marc Haber]

Package: gforge-mta-exim
Severity: important

Hi,

exim 3 is scheduled to be removed from lenny and sid really soon now.
Please consider removing gforge-mta-exim as well.

Greetings
Marc

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.20.7-zgsrv (SMP w/1 CPU core; PREEMPT)
Locale: LANG=C, LC_CTYPE=de_DE (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420270: logwatch: please take care of exim 3 going away

[Marc Haber]

Package: logwatch
Severity: normal

exim 3 is scheduled to be removed from lenny and sid really soon now.
Please consider swapping exim for exim4 in your dependencies.

Greetings
Marc

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.20.7-zgsrv (SMP w/1 CPU core; PREEMPT)
Locale: LANG=C, LC_CTYPE=de_DE (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420267: ninpaths: please take care of exim 3 going away

[Marc Haber]

Package: ninpaths
Severity: normal

exim 3 is scheduled to be removed from lenny and sid really soon now.
Please consider swapping exim for exim4 in your dependencies.

Greetings
Marc


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#418430: [Debian-hebrew-common] Re: [Debian-hebrew-package] Bug#418430: mixed hebrew/english spell checking is needed

[Yehoshua (Shay) O'Hayon Suchar]

Diego Iastrubni wrote:

> for kde4, there is a system which can determinate the language, and then pass 
> it to the correct spell checker. english will not be sent to hspell.
>
> the violation of the policy is a good point. but i am pretty sure we are in 
> some gray area.
>   
There are no gray areas in Debian *grin* that's why the policies are there


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420269: /usr/bin/podebconf-report-po: --langs does not work

[Marc Haber]

Package: po-debconf
Version: 1.0.8
Severity: normal
File: /usr/bin/podebconf-report-po

I am trying to report issues with mr.po in the exim4 packages:

[9/[EMAIL PROTECTED]:~/chroot/sid-packages/home/mh/exim4/trunk$ 
podebconf-report-po --langs=mr --languageteam
Outdated files: mk.po pl.po cy.po tl.po mr.po et.po he.po
Ready to send the emails, are you sure? [y/N/e/?] n

Why does pod-r-po want to write to the other language teams?

Greetings
Marc

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.20.7-zgsrv (SMP w/1 CPU core; PREEMPT)
Locale: LANG=C, LC_CTYPE=de_DE (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash

Versions of packages po-debconf depends on:
ii  gettext0.16.1-1  GNU Internationalization utilities
ii  intltool-debian0.35.0+20060710.1 Help i18n of RFC822 compliant conf
ii  perl   5.8.8-7   Larry Wall's Practical Extraction 

Versions of packages po-debconf recommends:
ii  libcompress-zlib-perl 1.42-2 Perl module for creation and manip
ii  libmail-sendmail-perl 0.79-4 Send email from a perl script

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420272: ipband: please take care of exim 3 going away

[Marc Haber]

Package: ipband
Severity: normal

exim 3 is scheduled to be removed from lenny and sid really soon now.
Please consider swapping exim for exim4 in your dependencies.

Greetings
Marc


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420271: mailagent: please take care of exim 3 going away

[Marc Haber]

Package: mailagent
Severity: normal

exim 3 is scheduled to be removed from lenny and sid really soon now.
Please consider swapping exim for exim4 in your dependencies.

Greetings
Marc


-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.20.7-zgsrv (SMP w/1 CPU core; PREEMPT)
Locale: LANG=C, LC_CTYPE=de_DE (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420274: debbugs: please take care of exim 3 going away

[Marc Haber]

Package: debbugs
Severity: normal

exim 3 is scheduled to be removed from lenny and sid really soon now.
Please consider swapping exim for exim4 in your dependencies.

Greetings
Marc


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420275: capisuite: please take care of exim 3 going away

[Marc Haber]

Package: capisuite
Severity: normal

exim 3 is scheduled to be removed from lenny and sid really soon now.
Please consider swapping exim for exim4 in your dependencies.

Greetings
Marc


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

debian-bugs-dist@lists.debian.org

[emisca]

You should only run:
sudo /usr/share/bug/xserver-xorg-core/script

or instead:
sudo /usr/share/bug/xserver-xorg-core/script > nomefile

if you want to save the output on a file...

2007/4/21, Joshua Dunamis - <[EMAIL PROTECTED]>:

Excuse me, I don't know how to run it. If I try with sh this is the
output:

[EMAIL PROTECTED]:~$ sudo /usr/share/bug/xserver-xorg-core/script 3>&1
/usr/share/bug/xserver-xorg-core/script: line 16: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 17: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 22: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 31: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 37: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 38: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 39: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 40: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 53: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 56: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 57: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 62: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 65: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 66: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 67: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 72: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 80: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 86: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 87: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 88: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 89: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 90: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 91: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 92: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 97: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 102: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 103: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 104: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 107: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 108: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 109: 3: Descrittore di file non 
valido
/usr/share/bug/xserver-xorg-core/script: line 118: 3: Descrittore di file non 
valido


On Friday 20 April 2007, alle 20:26, Julien Cristau wrote:
> Subject: Re: Bug#420177: libdrm2: the output of my 
/usr/share/bug/xserver-xorg-core/script 3>&1
> From: Julien Cristau <[EMAIL PROTECTED]>
> Date: Fri, 20 Apr 2007 20:26:23 +0200
> To: Joshua Dunamis <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
> X-Operating-System: Linux 2.6.18-4-686 i686
> User-Agent: Mutt/1.5.13 (2006-08-11)
>
> On Fri, Apr 20, 2007 at 20:15:39 +0200, Joshua Dunamis wrote:
>
> > Package: libdrm2
> > Version: 2.3.0-4
> > Followup-For: Bug #420177
> >
> >
> > As requested I put the output of my
> > /usr/share/bug/xserver-xorg-core/script 3>&1
> >
> What you sent is actually the *contents* of this file.  You need to run
> this script, and it will output your X config and log, which is the
> information we need.
>
> Thanks,
> Julien




--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]





--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420273: ftp.debian.org: please remove exim-doc from sid and lenny

[Marc Haber]

Package: ftp.debian.org
Severity: wishlist

Dear ftpmaster,

please consider removing exim-doc (for is exim 3, not exim4) from sid and
lenny. exim 3 is going to be removed from sid and lenny as well
(#420191), and it does not make sense to keep the docs around.

Greetings
Marc


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420193: libsane on sparc64 with SCSI scanner

[BERTRAND Joël]

Julien BLACHE a écrit :

BERTRAND Joël <[EMAIL PROTECTED]> wrote:

Hi,


Hello,


Have you diffed the 2 libsane versions yet ? (the backend you're using
+ common code in sanei/ for a start)

No, I don't, because I have to find a couple libsane/kernel
that works on sparc64 and another that doesn't work, and I cannot
reboot my U2 only to make test.


No, I meant looking at the code in both SANE versions and see if
there's anything that rings a bell in the diff.


I shall check sources this evening.


No, not at the moment, I'm afraid. Can you try to run the libsane
version from sarge on the sparc and see if it still works ?

I have tried, but without success. I have tried 1.0.14, 1.0.16
and 1.0.18. Maybe, like mysql-server bug on sparc64, trouble comes
from glibc or dark side of kernel itself...


Ouch! So libsane from sarge works on an older kernel, and doesn't work
on the newer one ?


	Yes. I have check kernel sources (sg tree) and the last change was made 
in 2006...


JKB

Bug#378119: Yaboot does not boot correctly on a firewire CD drive

[didier]

IMO this one can be rejected because it's not a bug in yaboot but an
Ubuntu liveCD one. The live CD use the cd: alias, which with an external
drive rarely points to the right device.



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420229: installing ccs fails during attempted install of gnbd-server

[Gémes Géza]

Daniel Kahn Gillmor írta:

Package: ccs
Version: 1.03.00-2
Severity: important


squeak is a debian system running lenny/sid.  i was trying to install
gnbd-server, and it failed due to some problem with ccs:

[0 [EMAIL PROTECTED] ~]# apt-get install gnbd-server 
Reading package lists... Done

Building dependency tree... Done
The following extra packages will be installed:
  ccs cman fence libdlm1 libmagma1 magma-plugin-sm
The following NEW packages will be installed:
  ccs cman fence gnbd-server libdlm1 libmagma1 magma-plugin-sm
0 upgraded, 7 newly installed, 0 to remove and 1 not upgraded.
Need to get 252kB of archives.
After unpacking 1147kB of additional disk space will be used.
Do you want to continue [Y/n]? 
Get:1 http://ftp.debian.org testing/main libmagma1 1.03.00-2 [19.7kB]

Get:2 http://ftp.debian.org testing/main libdlm1 1.03.00-2 [10.8kB]
Get:3 http://ftp.debian.org testing/main magma-plugin-sm 1.03.00-2 [9210B]
Get:4 http://ftp.debian.org testing/main ccs 1.03.00-2 [51.8kB]
Get:5 http://ftp.debian.org testing/main cman 1.03.00-2 [23.2kB]
Get:6 http://ftp.debian.org testing/main fence 1.03.00-2 [96.4kB]
Get:7 http://ftp.debian.org testing/main gnbd-server 1.03.00-2 [41.0kB]
Fetched 252kB in 1s (239kB/s)
Selecting previously deselected package libmagma1.

(Reading database ... 185474 files and directories currently installed.)
Unpacking libmagma1 (from .../libmagma1_1.03.00-2_i386.deb) ...
Selecting previously deselected package libdlm1.
Unpacking libdlm1 (from .../libdlm1_1.03.00-2_i386.deb) ...
Selecting previously deselected package magma-plugin-sm.
Unpacking magma-plugin-sm (from .../magma-plugin-sm_1.03.00-2_i386.deb) ...
Selecting previously deselected package ccs.
Unpacking ccs (from .../ccs_1.03.00-2_i386.deb) ...
Selecting previously deselected package cman.
Unpacking cman (from .../cman_1.03.00-2_i386.deb) ...
Selecting previously deselected package fence.
Unpacking fence (from .../fence_1.03.00-2_i386.deb) ...
Selecting previously deselected package gnbd-server.
Unpacking gnbd-server (from .../gnbd-server_1.03.00-2_i386.deb) ...
Setting up libmagma1 (1.03.00-2) ...

Setting up libdlm1 (1.03.00-2) ...

Setting up magma-plugin-sm (1.03.00-2) ...
Setting up ccs (1.03.00-2) ...
Starting cluster configuration system: /etc/cluster/cluster.conf: file not 
found.
Please ensure an initial copy of this file is present on all cluster nodes.
invoke-rc.d: initscript ccs, action "start" failed.
dpkg: error processing ccs (--configure):
 subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of cman:
 cman depends on ccs (>> 1.03.00); however:
  Package ccs is not configured yet.
 cman depends on ccs (<< 1.03.01); however:
  Package ccs is not configured yet.
dpkg: error processing cman (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of fence:
 fence depends on cman (>> 1.03.00); however:
  Package cman is not configured yet.
 fence depends on cman (<< 1.03.01); however:
  Package cman is not configured yet.
dpkg: error processing fence (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of gnbd-server:
 gnbd-server depends on fence (= 1.03.00-2); however:
  Package fence is not configured yet.
dpkg: error processing gnbd-server (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 ccs
 cman
 fence
 gnbd-server
E: Sub-process /usr/bin/dpkg returned an error code (1)
[100 [EMAIL PROTECTED] ~]# 



Thanks for looking into this.

--dkg

-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing'), (200, 'unstable'), (101, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.18-4-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages ccs depends on:
ii  libc6  2.3.6.ds1-13  GNU C Library: Shared libraries
ii  libmagma1  1.03.00-2 Cluster abstraction - development 
ii  libxml22.6.27.dfsg-1 GNOME XML library

ii  magma-plugin-sm1.03.00-2 Cluster abstraction - sm plugin

ccs recommends no packages.

-- no debconf information


  
IMHO the ccs package should provide a small debconf utility which would 
create a very basic cluster.conf, so that ccs could be started.


Geza

Bug#420276: Copyright file incomplete; possibly includes non-free/undistributable data

[Andrew Donnellan]

Package: blobwars
Version: 1.06-2-1
Severity: serious

Hi,

It appears that the current copyright file is incomplete. It needs to include
a full license statement; see 
http://lists.debian.org/debian-devel-announce/2003/12/msg7.html and
http://lists.debian.org/debian-devel-announce/2006/03/msg00023.html

Additionally, it seems that the music files in the package are under an unclear
license and could possibly be non-free or even undistributable.

Andrew

-- System Information:
Debian Release: lenny/sid
  APT prefers stable
  APT policy: (600, 'stable'), (500, 'testing'), (400, 'unstable'), (1, 
'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.18-4-k7 (SMP w/1 CPU core)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages blobwars depends on:
ii  libc6   2.5-2GNU C Library: Shared libraries
ii  libgcc1 1:4.2-20070307-1 GCC support library
ii  libsdl-image1.2 1.2.5-3  image loading library for Simple D
ii  libsdl-mixer1.2 1.2.6-2  mixer library for Simple DirectMed
ii  libsdl-ttf2.0-0 2.0.8-3+b1   ttf library for Simple DirectMedia
ii  libsdl1.2debian 1.2.11-8 Simple DirectMedia Layer
ii  libstdc++6  4.1.1-21 The GNU Standard C++ Library v3
ii  zlib1g  1:1.2.3-13   compression library - runtime

blobwars recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#325935: ITP: warzone2100 -- 3D realtime strategy on a future Earth

[Petter Reinholdtsen]

So, etch is released, and I've started playing warzone2100 on it.
Work like a charm, when one ignore the amount of time I have sunk into
the game so far. :)

I built the upstream version myself, and it worked out of the box.  Is
there anything missing before it can be uploaded into Debian/main?

This game is very good! :)

Friendly,
-- 
Petter Reinholdtsen


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420277: iceape: emailing attachments doesn't work (from command line/scripts)

[Paolo]

Package: iceape
Version: 1.0.8-4
Severity: important

hi,

mozilla/thunderbird used to open the msg compose window with the named file
attachd, ie 

% thunderbird  -compose attachment='file:///home/me/rsync.log'

would start a new msg with rsync.log in attachments list, whereas

% iceape -compose attachment='file:///home/amsis/rsyncom.log'

opens just the compose window and the attachments list is void.

That breaks sending from any apps, eg from OOo - hence the severity tag.

thanks
--
paolo



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#385986: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=385986

[Yves-Alexis Perez]

I don't think the bug was really in Xfce, but anyway there's no real way
to determine this now. If you think the bug is over, can you close it?
(or let me do it if you don't know how to do this).

Thanks and regards,
-- 
Yves-Alexis



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#397035: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=397035

[Yves-Alexis Perez]

reassign #397035 exo
thanks

exo preferred applications now uses x-terminal-emulator and not
Terminal, so selecting mutt in preferred mail applications will launch
current terminal.

Can you check this in Xfce 4.4 and report success or error?

Regards,
-- 
Yves-Alexis



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#359797: libsane: udev rules file broken

[Julien BLACHE]

Brad Sawatzky <[EMAIL PROTECTED]> wrote:

Hi,

> Changing the line to
>   SUBSYSTEM!="usb_endpoint", GOTO="libsane_rules_end"
> allows the rule to match and fixes the problem for me.
>
> I assume that this is a change in how kernel 2.6.20.7 reports this device?
> I've attached a udevinfo dump for the curious.

OK, looks like udev changed again... gotta love this.

Can you unplug your scanner, run udevmonitor (as root), plug it in and
send me the output ?

JB.

-- 
 Julien BLACHE - Debian & GNU/Linux Developer - <[EMAIL PROTECTED]> 
 
 Public key available on  - KeyID: F5D6 5169 
 GPG Fingerprint : 935A 79F1 C8B3 3521 FD62 7CC7 CD61 4FD7 F5D6 5169 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

debian-bugs-dist@lists.debian.org

[Brice Goglin]

With sudo, that would be something like (the direction has to be within
sudo):
sudo bash -c "/usr/share/bug/xserver-xorg-core/script 3>&1"
or
sudo bash -c "/usr/share/bug/xserver-xorg-core/script 3>&1" > file

Brice



emisca wrote:
> You should only run:
> sudo /usr/share/bug/xserver-xorg-core/script
>
> or instead:
> sudo /usr/share/bug/xserver-xorg-core/script > nomefile
>
> if you want to save the output on a file...
>
> 2007/4/21, Joshua Dunamis - <[EMAIL PROTECTED]>:
>> Excuse me, I don't know how to run it. If I try with sh this is the
>> output:
>>
>> [EMAIL PROTECTED]:~$ sudo /usr/share/bug/xserver-xorg-core/script 3>&1
>> /usr/share/bug/xserver-xorg-core/script: line 16: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 17: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 22: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 31: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 37: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 38: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 39: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 40: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 53: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 56: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 57: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 62: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 65: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 66: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 67: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 72: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 80: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 86: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 87: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 88: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 89: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 90: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 91: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 92: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 97: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 102: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 103: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 104: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 107: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 108: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 109: 3: Descrittore di
>> file non valido
>> /usr/share/bug/xserver-xorg-core/script: line 118: 3: Descrittore di
>> file non valido
>>
>>
>> On Friday 20 April 2007, alle 20:26, Julien Cristau wrote:
>> > Subject: Re: Bug#420177: libdrm2: the output of my
>> /usr/share/bug/xserver-xorg-core/script 3>&1
>> > From: Julien Cristau <[EMAIL PROTECTED]>
>> > Date: Fri, 20 Apr 2007 20:26:23 +0200
>> > To: Joshua Dunamis <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
>> > X-Operating-System: Linux 2.6.18-4-686 i686
>> > User-Agent: Mutt/1.5.13 (2006-08-11)
>> >
>> > On Fri, Apr 20, 2007 at 20:15:39 +0200, Joshua Dunamis wrote:
>> >
>> > > Package: libdrm2
>> > > Version: 2.3.0-4
>> > > Followup-For: Bug #420177
>> > >
>> > >
>> > > As requested I put the output of my
>> > > /usr/share/bug/xserver-xorg-core/script 3>&1
>> > >
>> > What you sent is actually the *contents* of this file.  You need to
>> run
>> > this script, and it will output your X config and log, which is the
>> > information we need.
>> >
>> > Thanks,
>> > Julien
>>
>>
>>
>>
>> -- 
>> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
>> with a subject of "unsubscribe". Trouble? Contact
>> [EMAIL PROTECTED]
>>
>>
>
>



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#407574: kdvi should *recommend* texlive-fonts-recommended, not *depend* on it!

[Henk Koster]

In the old version 4:3.5.5-3 kdvi recommended the now obsolete 
tetex-bin.  The new version 4:3.5.6-2 depends on 
texlive -fonts-recommended, which also pulls in texlive-common, -base, 
and -base-bin.

These dependencies may not be wanted, as in my own case where I have 
already installed TeXLive2007 directly from the TUG distro in 
my /usr/local/texlive/2007 tree.

I can live with kdvi *recommending* texlive package(s), but not with 
*depending* on them.
 
-- 
Henk Koster
"Behavioral axioms are right, but agents make mistakes."
Attributed to L.J. Savage




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420265: cpufreqd: not work perfectly on battery

[Mattia Dongili]

Hello,

On Sat, April 21, 2007 11:09 am, giggz wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Subject: cpufreqd: not work perfectly on battery
> Package: cpufreqd
> Version: 2.2.1-2
> Severity: normal
>
> *** Please type your report below this line ***
> HI,
>
> Since fews days i notice that cpufreqd doesn't work perfectly anymore.
>
> For example :
> It works perfectly on ac=on (performance or ondemand...I have changed it
> in /etc/cpufreqd.conf in order to test it).
> It doesn't work anymore on battery. On ac=off my laptop is always in
> performance mode or in performance low when cpu is too hot.
> I noticed that the movie watcher profile doesn't work anymore too.

Uh, it's quite a long time I don't push updates to cpufreqd...
At a first glance it looks like the governor kernel modules are not
available. Maybe a kernel update broke it? Maybe the cpufreqd init script
fails to load the necessary modules?
Can you check what cpufreq-info reports?
If you still have problems try to send me the cpufreqd log of a failing
profile switch (the full log is ok) and the output of 'sh -x
/etc/init.d/cpufreqd start'.

Thanks
-- 
mattia
:wq!

Bug#56440: lintian: Should check for shlibs that with incorrect package name

[Mike Hommey]

On Mon, Jan 31, 2000 at 04:21:46PM -0500, Joey Hess <[EMAIL PROTECTED]> wrote:
> [EMAIL PROTECTED] wrote:
> > I can't see any reason a package would list any packages other than itself
> > in its shlibs file.  I suggest putting the check in, and if there are lots 
> > of packages doing this then we can pursue in policy why and whether it's
> > worthwhile. But I really doubt it's the case.
> 
> Lots of packages list other packages in their shlibs files. For example, all
> the xaw replacement libraries must do this.
> 
> Hm, I just realized something. I belive that policy or the packaging manual
> currently says that packages that contain libraries should include shlibs
> files. But why? Wouldn't it make more sense if the shlibs file was in the
> associated -dev package? After all, the contents of the file only matters if
> you are doing development with the library. The file format is such they
> could be moved over wholesale to -dev packages with no changes.
> 
> Then the proposed lintian check would make sense, though there will still be
> exceptions.

7 years later, I got hit by this in one of my packages. It would have
helped if lintian gave me at least a warning about the shlibs content...

Sure there are exceptions, but on my system, there are 17 over 381
shlibs. As far as it is known to be exceptions, it's not a problem to
have the warnings there, they could even be put in lintian overrides...

Mike



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#415326: Fixed (upstream?) in 2.0.0

[Johannes Adams]

Hello!

Since the new upstream release 2.0.0 hit unstable yesterday, I just
thought to try it again and the annoying stripes were gone. So feel free
to close this bug, as it doesn't seem to exist anymore in 2.0.0

Again, thanks a lot for you hard work! I really apreciate it!

Johannes


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420193: libsane on sparc64 with SCSI scanner

[Julien BLACHE]

BERTRAND Joël <[EMAIL PROTECTED]> wrote:

>> Ouch! So libsane from sarge works on an older kernel, and doesn't work
>> on the newer one ?
>
>   Yes. I have check kernel sources (sg tree) and the last change
> was made in 2006...

Which is post-Sarge I guess. Anything in the 32/64bit ioctl() compat
layer ?

JB.

-- 
 Julien BLACHE <[EMAIL PROTECTED]>  |  Debian, because code matters more 
 Debian & GNU/Linux Developer|   
 Public key available on  - KeyID: F5D6 5169 
 GPG Fingerprint : 935A 79F1 C8B3 3521 FD62 7CC7 CD61 4FD7 F5D6 5169 

Bug#420279: segfault on vbetool vbestate save

[andrea]

Package: vbetool
Version: 0.7-1.1
Severity: normal

on boot I read the message:
vbetool[2884]: segfault at 3632 rip 004248df rsp 
7fffe4df6470 error 4

I try to execute: " # vbetool vbestate save " and:
vbetool vbestate save
Get video state buffer size failed
Allocated buffer at 0x2 (base is 0x0)
ES: 0x2000 EBX: 0x
Segmentation faul

gdb's output is'nt verbose because don't exist vbetool-dbg package


-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.18-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages vbetool depends on:
ii  libc6   2.3.6.ds1-13 GNU C Library: Shared libraries
ii  zlib1g  1:1.2.3-13   compression library - runtime

vbetool recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420278: recode: Typos in info manual

[Reuben Thomas]

Package: recode
Version: 3.6-13
Severity: minor

Under "Why not iconv?" in the "Design" page: "loosing" -> "losing"
I suggest removing "fully". 

On the same page:

"fairly sounded" -> "properly grounded"?
"opened" -> "open"

Footnote 1 of "IBM-PC": "one need" -> "one needs"

In "Usual ASCII": "it's true name" -> "its true name"
-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.18-4-686 (SMP w/1 CPU core)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages recode depends on:
ii  libc6   2.3.6.ds1-13 GNU C Library: Shared libraries
ii  librecode0  3.6-13   Shared library on which recode is 

recode recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#409286: phpmyadmin: add link to documentation from login page

[Thijs Kinkhorst]

forwarded 409286 http://sf.net/support/tracker.php?aid=1704779
thanks

Hi Dan,

> Why not here also provide a link to
> http://localhost/phpmyadmin/Documentation.html ?

I've forwarded this to upstream. I believe all the other items of your bug
report have been dealt with in various ways, or are intentional in
upstream.


thanks,
Thijs

Bug#420256: Bindgraph does not create rrd files.

[José Luis Tallón]

[EMAIL PROTECTED] wrote:
> Package: bindgraph
> Version: 0.2-5
> Severity: normal
>
>
> Bindgraph does not create rrd files. In etc/default/bindgraph LOG_FORMAT 
> field was changed from "bind93" to "bind92"
>   
If you have bind 9.3 installed (as shown below), why did you change the
log format to "bind92" ?
>  but there is no success after change. 
If it "didn't work" before, why do you choose to change the log format
instead of other parameters?
> Respectively web page stays without images [ 
> http://webserver/cgi-bin/bindgraph.cgi ],
>  the apache error log does not show serious error.
>   
That would be related to the CGI, not bindgraph itself
> here is the cutted part from bind93 logfile : 
> ---
> 21-Apr-2007 10:39:41.911 client 213.240.249.93#2927: query: typhon IN A +
> 21-Apr-2007 10:39:41.991 client 213.240.249.93#2928: query: typhon IN A +
> 21-Apr-2007 10:39:42.114 client 213.240.249.93#2929: query: typhon IN A +
> 21-Apr-2007 10:39:42.159 client 213.240.249.93#2930: query: typhon IN A +
> 21-Apr-2007 10:39:42.211 client 213.240.249.93#2931: query: typhon IN A +
> 21-Apr-2007 10:39:42.408 client 213.240.249.93#2955: query: typhon IN A +
> 21-Apr-2007 10:39:47.301 client 213.240.249.67#1718: query: 
> www.varnacity.info IN A +
> 21-Apr-2007 10:39:48.316 client 213.240.249.67#1718: query: www.ida.bg IN A +
> 21-Apr-2007 10:39:48.562 client 213.240.249.67#1718: query: 
> news.varnacity.info IN A +
> 21-Apr-2007 10:39:48.652 client 213.240.249.66#1477: query: ns.aska.com.ua IN 
> A +
> --
>
> this is bingraph conf file : 
> 
> xxx:~# cat /etc/default/bindgraph 
> DNS_LOG=/var/log/bind9-query.log
> LOG_FORMAT=bind92
> -
>   
Have you checked that the logfile is located where bindgraph expects it ?
Have you checked that the logfile is readable for bindgraph ?
Have you checked that RRD files are indeed not created?
Have you checked that bindgraph has permissions to write them?
Have you checked that Apache has permissions to read the generated RRD
files?
> -- System Information:
> Debian Release: 4.0
>   APT prefers stable
>   APT policy: (500, 'stable')
> Architecture: i386 (i686)
> Shell:  /bin/sh linked to /bin/bash
> Kernel: Linux 2.6.11.5-vs-MiCRo
> Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
>
> Versions of packages bindgraph depends on:
> ii  debconf [debconf-2.0] 1.5.11 Debian configuration management 
> sy
> ii  libfile-tail-perl 0.98-5 File::Tail perl module
> ii  librrds-perl  1.2.15-0.3 Time-series data storage and 
> displ
>
> Versions of packages bindgraph recommends:
> ii  apache [httpd]1.3.34-4.1 versatile, high-performance HTTP 
> s
> ii  bind9 1:9.3.4-2  Internet Domain Name Server
>
> -- debconf information:
> * bindgraph/logfile: /var/log/bind9-query.log
> * bindgraph/configure_bind:
> * bindgraph/stay_on_purge: false
> * bindgraph/start_on_boot: true
>
>   



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420203: Config and logs

[Brice Goglin]

forwarded 420203 https://bugs.freedesktop.org/show_bug.cgi?id=10623
thank you



luben karavelov wrote:
> Screen 0: minimum 320 x 200, current 1280 x 768, maximum 1280 x 1280
> VGA connected 1280x768+0+0 normal (normal left inverted right) 0mm x 0mm
>   Identifier: 0x4b
>   Timestamp:  303234099
>   Subpixel:   unknown
>   Clones: 
>   CRTC:   0
>   CRTCs:  0
>   1280x800 (0x4c)   83.5MHz
> h: width  1280 start 1344 end 1480 total 1680 skew0 clock   
> 49.7KHz
> v: height  800 start  801 end  804 total  828   clock   60.0Hz
>   1280x768 (0x4d)   80.1MHz
> h: width  1280 start 1344 end 1480 total 1680 skew0 clock   
> 47.7KHz
> v: height  768 start  769 end  772 total  795   clock   60.0Hz
>   1024x768 (0x4e)   65.0MHz
> h: width  1024 start 1048 end 1184 total 1344 skew0 clock   
> 48.4KHz
> v: height  768 start  771 end  777 total  806   clock   60.0Hz
>   800x600 (0x4f)   40.0MHz
> h: width   800 start  840 end  968 total 1056 skew0 clock   
> 37.9KHz
> v: height  600 start  601 end  605 total  628   clock   60.3Hz
>   640x480 (0x50)   25.2MHz
> h: width   640 start  656 end  752 total  800 skew0 clock   
> 31.5KHz
> v: height  480 start  490 end  492 total  525   clock   59.9Hz
>   


Ok this shows that only 5 resolutions are detected, and 1280x768 is
chosen by default for some reason. Note that you may use 'xrandr
--output VGA --mode 1024x768' to change to 1024x768 at runtime. It looks
like your old 1280x1024 is not detected here because hsync and vrefresh
are out of range.

BTW, do you use a package such as 915resolution? IIRC, it is not
required anymore since it modifies BIOS tables that are not used anymore
by the new driver.

I see that you already reported the bug at
https://bugs.freedesktop.org/show_bug.cgi?id=10623 so I am marking this
bug as forwarded.

Brice



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#390691: ITP: gnome-icon-theme-human -- Ubuntu default

[Alan Baghumian]

Hi,

I'm working on the package to upload it to Debian. Is it OK to reopen  
this bug to be automatically closed during upload?


Thanks,
Alan

Bug#420163: Acknowledgement (avr-libc: wrong named bit in SFR of AT90PWMx)

[Tobias Frost]

I also filed the bug upstream. 

http://savannah.nongnu.org/bugs/index.php?19650

Tobi


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#414847: antlr: violates the new py policy

[Michael Koch]

tag 414847 pending
thanks


New package fixing this bug uploaded. Its currently being processed in
the NEW queue due to a new antlr-doc package being built.


Cheers,
Michael
-- 
 .''`.  | Michael Koch <[EMAIL PROTECTED]>
: :' :  | Free Java Developer 
`. `'   |
  `-| 1024D/BAC5 4B28 D436 95E6 F2E0 BD11 5923 A008 2763 483B


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#407574: kdvi should *recommend* texlive-fonts-recommended, not *depend* on it!

[Sune Vuorela]

On Saturday 21 April 2007, Henk Koster wrote:
> In the old version 4:3.5.5-3 kdvi recommended the now obsolete
> tetex-bin.  The new version 4:3.5.6-2 depends on
> texlive -fonts-recommended, which also pulls in texlive-common, -base,
> and -base-bin.

well.. I consider it a bug in the old versions that it was only recommends. 
kdvi fails to do almost anything - especially viewing plain documents - 
without having the fonts and the kpsewitch binary installed.

If you try using kdvi on a document without those things installed, you will 
gets lots and lots of error messages.
So kdvi needs it to work. The way to declare that in debian is by using a 
Depends: line.

> These dependencies may not be wanted, as in my own case where I have
> already installed TeXLive2007 directly from the TUG distro in
> my /usr/local/texlive/2007 tree.

well.. when you install stuff from source without telling the package managre 
that you do it, you will run into all sorts of things like this.
Generally it is not supported - but you might be able to look into the equivs 
program to help you hack around it.

> I can live with kdvi *recommending* texlive package(s), but not with
> *depending* on them.

Sorry.

/Sune

-- 
How can I do for forwarding to a space bar?

You can never reconfigure a controller of the SIMM to a parallel utility in 
order to turn off a login.


signature.asc
Description: This is a digitally signed message part.

Bug#420280: libpcre3: Please package PCRE 7.0, which includes important fixes and updates

[Reuben Thomas]

Package: libpcre3
Version: 6.7-1
Severity: wishlist

>From the NEWS file:

Important changes that are visible to users are:

1. The Unicode property tables have been updated to Unicode 5.0.0, which adds
   some more scripts.

2. The option PCRE_NEWLINE_ANY causes PCRE to recognize any Unicode newline
   sequence as a newline.

3. The \R escape matches a single Unicode newline sequence as a single unit.

4. New features that will appear in Perl 5.10 are now in PCRE. These include
   alternative Perl syntax for named parentheses, and Perl syntax for
   recursion.

5. The C++ wrapper interface has been extended by the addition of a
   QuoteMeta function and the ability to allow copy construction and
   assignment.
-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.18-4-686 (SMP w/1 CPU core)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages libpcre3 depends on:
ii  libc6   2.3.6.ds1-13 GNU C Library: Shared libraries

libpcre3 recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#238237: Have grep reply with a useful error message

[Richard Hartmann]

Wouldn't it make sense to have grep reply with

'For the reasons laid out in bug #238237, grep does not support -P.
Please use pcregrep instead'

or something along those lines? This would nicely solve the /usr
issue, not require static linking and still give the user an immediate
solution to this very unexpected problem.


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420282: texlive-lang-other: the description of the package has a typo

[SZOKOVACS Robert]

Package: texlive-lang-other
Version: description is wrong
Severity: minor

This is obviously wrong:

hyphen-welsh -- Czechoslovak scripts


-- System Information:
Debian Release: lenny/sid
  APT prefers stable
  APT policy: (500, 'stable'), (400, 'unstable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#407574: Texlive dependencies

[Henk Koster]

Making a bunch of texlive packages dependencies of kdvi only makes sense if 
kdvi is an optional package in KDE. But, as things stand now, kdvi cannot be 
removed without removing all of kde... So much for choice, huh?
 
-- 
Henk Koster
"Behavioral axioms are right, but agents make mistakes."
Attributed to L.J. Savage




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420281: xserver-xorg-video-intel: xv playback crashes X server

[[EMAIL PROTECTED]]

Package: xserver-xorg-video-intel
Version: 2:2.0.0-1

xv playback crashes X server

00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated 
Graphics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics 
Device (rev 02)



Ahora también puedes acceder a tu correo Terra desde el móvil.
Infórmate pinchando aquí.

debian-bugs-dist@lists.debian.org

[Joshua Dunamis -]

OK, now I can put the correct output. Here it is in the attached file
Contents of /var/lib/x11/X.roster:
xserver-xorg

/etc/X11/X target does not match checksum in /var/lib/x11/X.md5sum.

X server symlink status:
lrwxrwxrwx 1 root root 13 2007-01-13 05:19 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1703500 2007-04-20 08:21 /usr/bin/Xorg

Contents of /var/lib/x11/xorg.conf.roster:
xserver-xorg

VGA-compatible devices on PCI bus:
04:00.0 VGA compatible controller: nVidia Corporation GeForce 7300 GS (rev a1)

/etc/X11/xorg.conf does not match checksum in /var/lib/x11/xorg.conf.md5sum.

Xorg X server configuration file status:
-rw-r--r-- 1 root root 4213 2007-04-21 12:33 /etc/X11/xorg.conf

Contents of /etc/X11/xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  ([EMAIL PROTECTED])  Mon Feb 26 23:38:46 PST 
2007

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice"Generic Keyboard"
InputDevice"Configured Mouse"
EndSection

Section "Files"

# path to defoma fonts
FontPath"/usr/share/fonts/X11/misc"
FontPath"/usr/X11R6/lib/X11/fonts/misc"
FontPath"/usr/share/fonts/X11/cyrillic"
FontPath"/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath"/usr/share/fonts/X11/100dpi/:unscaled"
FontPath"/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath"/usr/share/fonts/X11/75dpi/:unscaled"
FontPath"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath"/usr/share/fonts/X11/Type1"
FontPath"/usr/X11R6/lib/X11/fonts/Type1"
FontPath"/usr/share/fonts/X11/100dpi"
FontPath"/usr/X11R6/lib/X11/fonts/100dpi"
FontPath"/usr/share/fonts/X11/75dpi"
FontPath"/usr/X11R6/lib/X11/fonts/75dpi"
FontPath"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Disable"dri"
Load   "bitmap"
Load   "dbe"
Load   "ddc"
Load   "extmod"
Load   "freetype"
Load   "glx"
Load   "int10"
Load   "record"
Load   "v4l"
Load   "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
EndSection

Section "Monitor"
Identifier "HannStar U17"
HorizSync   30.0 - 80.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection

Section "Device"
Identifier "NVIDIA GeForce 7300 GS"
Driver "nvidia"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "NVIDIA GeForce 7300 GS"
Monitor"HannStar U17"
DefaultDepth24
Option "TripleBuffer" "True"
Option "AllowGLXWithComposite" "True"
Option "RenderAccel" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth   1
Modes  "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth   4
Modes  "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth   8
Modes  "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth   15
Modes  "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth   16
Modes  "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth   24
Modes  "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Extensions"
Option "RENDER" "true"
Option "DAMAGE" "true"
Option "Composite" "Enable"
EndSection



Xorg X server log files on system:
-rw-r--

Bug#420283: 915resolution: xserver-xorg-video-intel renders this package obsolete

[Brice Goglin]

Package: 915resolution
Severity: normal

Hi,

xserver-xorg-core 1.3 and xserver-xorg-video-intel 2.0 entered unstable
yesterday. It brings modesetting support by default, which means the BIOS
tables that 915resolution modifies are not used anymore.
So I guess, at least, the description of 915resolution should be updated
to say that the package is useless with xserver-xorg-video-intel.

Brice


-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 
'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.21-rc7=panpancucul
Locale: LANG=C, [EMAIL PROTECTED] (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420256: Bindgraph does not create rrd files.

[Konstantin Kostadinov]

On Sat, 21 Apr 2007 12:21:53 +0200
José Luis Tallón <[EMAIL PROTECTED]> wrote:

> [EMAIL PROTECTED] wrote:
> > Package: bindgraph
> > Version: 0.2-5
> > Severity: normal
> >
> >
> > Bindgraph does not create rrd files. In etc/default/bindgraph
> > LOG_FORMAT field was changed from "bind93" to "bind92" 
> If you have bind 9.3 installed (as shown below), why did you change
> the log format to "bind92" ?

Because testing only.

> >  but there is no success after change. 
> If it "didn't work" before, why do you choose to change the log format
> instead of other parameters?

It is the default conf file generated by packge instlal scripts.
This is Debian/GNU Linux stable, custom changes are fights for other low
quality distros.

> > Respectively web page stays without images
> > [ http://webserver/cgi-bin/bindgraph.cgi ], the apache error log
> > does not show serious error. 
> That would be related to the CGI, not bindgraph itself
> > here is the cutted part from bind93 logfile : 
> > ---
> > 21-Apr-2007 10:39:41.911 client 213.240.249.93#2927: query: typhon
> > IN A + 21-Apr-2007 10:39:41.991 client 213.240.249.93#2928: query:
> > typhon IN A + 21-Apr-2007 10:39:42.114 client 213.240.249.93#2929:
> > query: typhon IN A + 21-Apr-2007 10:39:42.159 client
> > 213.240.249.93#2930: query: typhon IN A + 21-Apr-2007 10:39:42.211
> > client 213.240.249.93#2931: query: typhon IN A + 21-Apr-2007
> > 10:39:42.408 client 213.240.249.93#2955: query: typhon IN A +
> > 21-Apr-2007 10:39:47.301 client 213.240.249.67#1718: query:
> > www.varnacity.info IN A + 21-Apr-2007 10:39:48.316 client
> > 213.240.249.67#1718: query: www.ida.bg IN A + 21-Apr-2007
> > 10:39:48.562 client 213.240.249.67#1718: query: news.varnacity.info
> > IN A + 21-Apr-2007 10:39:48.652 client 213.240.249.66#1477: query:
> > ns.aska.com.ua IN A + --
> >
> > this is bingraph conf file : 
> > 
> > xxx:~# cat /etc/default/bindgraph 
> > DNS_LOG=/var/log/bind9-query.log
> > LOG_FORMAT=bind92
> > -
> >   

> Have you checked that the logfile is located where bindgraph expects
xxx:~# ls -l /var/log/bind9-query.log
-rw-r- 1 bind adm 86353025 Apr 21 13:42 /var/log/bind9-query.log

> it ? Have you checked that the logfile is readable for bindgraph ?

It is look like it is. ( adm group ).

> Have you checked that RRD files are indeed not created?

it is created now.

ls -l /var/lib/bindgraph/
total 6952
-rw-r--r-- 1 daemon adm 7106056 Apr 21 14:02 bindgraph.rrd


> Have you checked that bindgraph has permissions to write them?

yes it is.

> Have you checked that Apache has permissions to read the generated RRD
> files?

xxx:~# ls -l /var/lib/bindgraph/
total 6952
-rw-r--r-- 1 daemon adm 7106056 Apr 21 13:51 bindgraph.rrd

I think that apache can read the rrd file.


> > -- System Information:
> > Debian Release: 4.0
> >   APT prefers stable
> >   APT policy: (500, 'stable')
> > Architecture: i386 (i686)
> > Shell:  /bin/sh linked to /bin/bash
> > Kernel: Linux 2.6.11.5-vs-MiCRo
> > Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
> >
> > Versions of packages bindgraph depends on:
> > ii  debconf [debconf-2.0] 1.5.11 Debian configuration
> > management sy ii  libfile-tail-perl 0.98-5
> > File::Tail perl module ii  librrds-perl  1.2.15-0.3
> > Time-series data storage and displ
> >
> > Versions of packages bindgraph recommends:
> > ii  apache [httpd]1.3.34-4.1 versatile,
> > high-performance HTTP s ii  bind9
> > 1:9.3.4-2  Internet Domain Name Server
> >
> > -- debconf information:
> > * bindgraph/logfile: /var/log/bind9-query.log
> > * bindgraph/configure_bind:
> > * bindgraph/stay_on_purge: false
> > * bindgraph/start_on_boot: true
> >
> >   
> 


-- 

Konstantin Kostadinov

pgp key : F2C41D57 : at : subkeys.pgp.net

BOFH excuse #190:

Proprietary Information.

debian-bugs-dist@lists.debian.org

[Brice Goglin]

Joshua Dunamis - wrote:
> OK, now I can put the correct output. Here it is in the attached file
>   

Thank you!

> Section "Device"
> Identifier "NVIDIA GeForce 7300 GS"
> Driver "nvidia"
> EndSection
>   

Could you try with the "nv" driver instead? You might have to take it
from experimental (xserver-xorg-video-nv 1:2.0.2-1).

> Section "Extensions"
> Option "RENDER" "true"
> Option "DAMAGE" "true"
>   

By the way, I think these options are enabled by default.

> X Window System Version 1.3.0
> Release Date: 19 April 2007
> X Protocol Version 11, Revision 0, Release 1.3
> Build Operating System: Linux Debian
> Current Operating System: Linux uliak 2.6.18-4-686 #1 SMP Mon Mar 26 17:17:36 
> UTC 2007 i686
> Build Date: 20 April 2007
>   

You are using xserver-xorg-core 1.3.0, I guess this is the upgrade that
causes this problem, not libdrm2. The problem is probably that the
nvidia driver is not ready for this new X server. Could you try
downgrading xserver-xorg-core to testing 2:1.1.1-21?

> (II) LoadModule: "glx"
> (WW) Warning, couldn't open module glx
> (II) UnloadModule: "glx"
> (EE) Failed to load module "glx" (module does not exist, 0)
>   
> (II) LoadModule: "nvidia"
> (WW) Warning, couldn't open module nvidia
> (II) UnloadModule: "nvidia"
> (EE) Failed to load module "nvidia" (module does not exist, 0)
>   

I guess both these modules are provided by the nvidia package which is
probably incompatible with xserver-xorg-core 1.3.


So, if you want DRI and don't care about using an ugly binary driver,
try downgrading xserver-xorg-core to testing. If you don't need DRI,
just drop the nvidia driver and use the nv one (from experimental for
now, will be in unstable in a couple days).

Next step will probably be to reassign this bug to the nvidia driver and
pray...

Brice



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420284: util-vserver : [INTL:pt] Portuguese translation for debconf messages

[Traduz - Portuguese Translation Team]

Package: util-vserver
Version: 0.30.212-1
Tags: l10n, patch
Severity: wishlist

Portuguese translation for util-vserver's debconf messages.
Translator: Miguel Figueiredo 
Feel free to use it.

For translation updates please contact 'Last Translator' or the
Portuguese Translation Team .


--
Best regards,

Rui Branco
"Traduz" - Portuguese Translation Team
http://www.DebianPT.org














































pt.po
Description: application/gettext

Bug#420001: More info on aptitude: crashes when starting curses interface

[Arjan Oosting]

severity 420001
merge 420001 403534
thanks

Hmm, 

It seems I have hit the same bug as the reporter of 403534.
In a normal console I saw the following message:

*** Uncaught exception in resolver thread:
  Unexpectedly non-broken dependency 
libhugs-haxml 1.17-4 -> {libhugs-haxml-bundled 98.200609.21-4 
libhugs-haxml-bundled [UNINS
T]}!
 (libhugs-haxml 1.17-4 is not 
installed)

After a dpkg --purge libhugs-haxml I could start aptitude again.

Greetings Arjan


signature.asc
Description: Dit berichtdeel is digitaal ondertekend

Bug#420286: Please mention in the description what the utilities do

[Enrico Zini]

Package: mapnik-utils
Version: 0.4.0-1
Severity: minor

Hello,

thanks for maintaining mapnik.

The description of mapnik-utils says:

  [...]
  This package contains miscellaneous utilities distributed with mapnik.

It doesn't say, however, what these utilities do.  This makes it
impossible to use the description to answer basic questions such as
"what can I do with this?" and "is this something I could use?".


Ciao,

Enrico


-- System Information:
Debian Release: 4.0
  APT prefers testing
  APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.20.1enrico
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#417933: /usr/share/man/man5/proc.5.gz: proc(5) is wronf wrt /proc/[process]/stat

[Michael Kerrisk]

> Pierre Habouzit wrote:
>> On Wed, Apr 11, 2007 at 11:21:06PM +0200, Michael Kerrisk wrote:
   See fs/proc/array.c in linux source to see the actual values, but the
 description of /proc/[process]/stat is just plain wrong (fields missing,
 bad ordering, bad scanf things formats).
>>> Please be precise: which fields are missing, which are out of order, which
>>> formats are bad?
>>   Well, there is too many to express the diff directly, moreover I'm not
>> sure about what means the new ones. Just get fs/proc/array.c from the
>> mainline kernel, you'll see them there.
>>
>>   But for instance the 'starttime' is _just after_ the '0' place holder,
>> not after itrealvalue.
> 
> Hello Pierre,
> 
> Either there are a lot of problems, and the diff is hard to make but there
> should be at least several examples to cite, or there are just a few
> problems (see Justin's mail).  Which is it please?
> 
> Cheers,
> 
> Michael
> 
> PS In case it's not clear: I'm asking you to help fix the problem, rather
> than just saying there is one (initially without any supporting evidence).

Pierre -- ping!

Cheers,

Michael

-- 
Michael Kerrisk
maintainer of Linux man pages Sections 2, 3, 4, 5, and 7

Want to help with man page maintenance?  Grab the latest tarball at
http://www.kernel.org/pub/linux/docs/manpages/
read the HOWTOHELP file and grep the source files for 'FIXME'.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420285: gfax: Wrong send time - fails to do conversion from UTC

[Hans-Joachim Zierke]

Package: gfax
Version: 0.7.5~pre1-1
Severity: minor


Gfax displays wrong send time: UTC instead of local time. Not sure, wether
this is a Gfax or Hylafax bug.



-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)

Versions of packages gfax depends on:
ii  gconf22.16.1-1   GNOME configuration database syste
ii  hylafax-client2:4.3.1-7  Flexible client/server fax softwar
ii  libevolution2.0-cil   0.11.1-3   CLI bindings for Evolution
ii  libgconf2.0-cil   2.8.3-2CLI binding for GConf 2.12
ii  libglade2.0-cil   2.8.3-2CLI binding for the Glade librarie
ii  libglib2.0-cil2.8.3-2CLI binding for the GLib utility l
ii  libgnome2.0-cil   2.8.3-2CLI binding for GNOME 2.12
ii  libgnomeprint2.2-02.12.1-7   The GNOME 2.2 print architecture -
ii  libgtk2.0-cil 2.8.3-2CLI binding for the GTK+ toolkit 2
ii  libmono-corlib1.0-cil 1.2.2.1-1  Mono core library (1.0)
ii  libmono-system1.0-cil 1.2.2.1-1  Mono System libraries (1.0)
ii  libmono1.0-cil1.2.2.1-1  Mono libraries (1.0)
ii  mono-runtime  1.2.2.1-1  Mono runtime

gfax recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#390279: Bug 390279 Lyx crashes with various mouse activity

[Sven Hoexter]

Hi,
can you confirm that this bug has been fixed? I'd really like to close it
because according to Georg it should have been fixed in LyX 1.4.2.

Sven
-- 
If you won't forgive me the rest of my life
Let me apologize while I'm still alive
I know it's time to face all of my past mistakes
  [Less than Jake - Rest Of My Life]


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420287: cdbs: error in ant.mk: does not work

[Torsten Werner]

Package: cdbs
Version: 0.4.48
Severity: normal

Hi,


ant.mk from cdbs calls ant in a different way than /usr/bin/ant. The
 target in build.xml works when calling /usr/bin/ant directly
after installing the package ant-optional but it fails when using cdbs:

/home/twerner/debian/build-area/ilf-1.5.0/build.xml:18: Could not create task 
or type of type: symlink.

Ant could not find the task or a class this task relies upon.

This is common and has a number of causes; the usual
solutions are to read the manual pages then download and
install needed JAR files, or fix the build file:
 - You have misspelt 'symlink'.
   Fix: check your spelling.
 - The task needs an external JAR file to execute
 and this is not found at the right place in the classpath.
   Fix: check the documentation for dependencies.
   Fix: declare the task.
...

This is the same error message when ant-optional is not installed.


Cheers,
Torsten




-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (985, 'stable'), (88, 'testing'), (87, 'unstable'), (1, 
'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.19.1
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)

cdbs depends on no packages.

Versions of packages cdbs recommends:
ii  autotools-dev 20060702.1 Update infrastructure for config.{
ii  debhelper 5.0.42 helper programs for debian/rules

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420281: xserver-xorg-video-intel: xv playback crashes X server

[Brice Goglin]

tags 420821 +fixed-upstream
thank you


[EMAIL PROTECTED] wrote:
> Package: xserver-xorg-video-intel
> Version: 2:2.0.0-1
>
> xv playback crashes X server
>
> 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated 
> Graphics Device (rev 02)
> 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics 
> Device (rev 02)
>   

This is probably upstream bug
https://bugs.freedesktop.org/show_bug.cgi?id=10645
It is already fixed and will be for the next release of this driver.

To be sure, could you send the output of
/usr/share/bug/xserver-xorg/script 3>&1
AFTER the crash (without restarting the X server) so that we see your
config and the backtrace of the crash and the end of Xorg.0.log?

Brice



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420288: postgresql-plsh: FTBFS: postgresql-plsh: error: fmgr.h: No such file or directory

[Kurt Roeckx]

Package: postgresql-plsh
Version: 1.2-1
Severity: serious

Hi,

Your package is failing to build with the following error:
 gcc -DPACKAGE_NAME=\"pgplsh\" -DPACKAGE_TARNAME=\"pgplsh\" 
-DPACKAGE_VERSION=\"1.2\" "-DPACKAGE_STRING=\"pgplsh 1.2\"" 
-DPACKAGE_BUGREPORT=\"[EMAIL PROTECTED]" -DPACKAGE=\"pgplsh\" -DVERSION=\"1.2\" 
-DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 
-DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 
-DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -I. -I. 
-I/usr/include/postgresql/8.2/server -I/usr/include/postgresql -g -O2 -Wall -W 
-MT pgplsh.lo -MD -MP -MF .deps/pgplsh.Tpo -c pgplsh.c  -fPIC -DPIC -o 
.libs/pgplsh.o
In file included from /usr/include/postgresql/c.h:53,
 from /usr/include/postgresql/postgres.h:48,
 from pgplsh.c:9:
/usr/include/postgresql/pg_config.h:568:1: warning: "PACKAGE_BUGREPORT" 
redefined
:1:1: warning: this is the location of the previous definition
/usr/include/postgresql/pg_config.h:571:1: warning: "PACKAGE_NAME" redefined
:1:1: warning: this is the location of the previous definition
/usr/include/postgresql/pg_config.h:574:1: warning: "PACKAGE_STRING" redefined
:1:1: warning: this is the location of the previous definition
/usr/include/postgresql/pg_config.h:577:1: warning: "PACKAGE_TARNAME" redefined
:1:1: warning: this is the location of the previous definition
/usr/include/postgresql/pg_config.h:580:1: warning: "PACKAGE_VERSION" redefined
:1:1: warning: this is the location of the previous definition
pgplsh.c:10:18: error: fmgr.h: No such file or directory
pgplsh.c:11:23: error: miscadmin.h: No such file or directory
pgplsh.c:12:27: error: access/heapam.h: No such file or directory
pgplsh.c:13:32: error: catalog/catversion.h: No such file or directory
pgplsh.c:14:29: error: catalog/pg_proc.h: No such file or directory
pgplsh.c:16:30: error: commands/trigger.h: No such file or directory
pgplsh.c:17:28: error: libpq/pqsignal.h: No such file or directory
pgplsh.c:18:28: error: utils/syscache.h: No such file or directory
pgplsh.c:19:28: error: utils/builtins.h: No such file or directory
pgplsh.c:20:23: error: utils/rel.h: No such file or directory
pgplsh.c: In function 'cstring_to_type':
pgplsh.c:41: error: 'HeapTuple' undeclared (first use in this function)
[...]



Kurt



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

debian-bugs-dist@lists.debian.org

[Joshua Dunamis -]

> 
> Could you try with the "nv" driver instead? You might have to take it
> from experimental (xserver-xorg-video-nv 1:2.0.2-1).
> 

I already have this version of xserver-xorg-video-nv and I already tried
with nv in xorg.conf. X starts but it's very slow

> You are using xserver-xorg-core 1.3.0, I guess this is the upgrade that
> causes this problem, not libdrm2. The problem is probably that the
> nvidia driver is not ready for this new X server. Could you try
> downgrading xserver-xorg-core to testing 2:1.1.1-21?

I'm think you're right, While I upgraded libdrm, I upgraded
xserver-xorg-core too. I reported this bug in libdrm only due to the
changelog read in this package thinking something about the permissions
changes from 660 to 666. 

> 
> I guess both these modules are provided by the nvidia package which is
> probably incompatible with xserver-xorg-core 1.3.
> 
> 
> So, if you want DRI and don't care about using an ugly binary driver,
> try downgrading xserver-xorg-core to testing. If you don't need DRI,
> just drop the nvidia driver and use the nv one (from experimental for
> now, will be in unstable in a couple days).
> 

The nv module is very slow and not accellerated. 

> Next step will probably be to reassign this bug to the nvidia driver and
> pray...

This is a great idea

> 
> Brice

Thank you


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#356399: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=356399

[Catherine Thomas]

Yves-Alexis Perez a écrit :

Hi,

sorry for the extra-long delay to answer this bug :)
Is this still relevant (in Sarge/oldstable or in Etch/stable)? Is the
package "menu" installed?

Regards,


Oh sorry, I moved to Xubuntu, to have xfce and deb packages
Thank you your help
Stéphane

debian-bugs-dist@lists.debian.org

[Brice Goglin]

reassign 420177 nvidia-glx
retitle 420177 nvidia-glx does not work with Xserver 1.3
thank you


As explained earlier, xserver-xorg-core 1.3 now in unstable does not
work with nvidia-glx. I am reassigning this bug to nvidia-glx which
needs to be updated.

Brice



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#390691: ITP: gnome-icon-theme-human -- Ubuntu default

[Adam Cécile (Le_Vert)]

Hi,

Don't worry, please hijack my ITP :-)

Thanks for your work,

Regards, Adam

Le samedi 21 avril 2007 12:27, Alan Baghumian a écrit :
> Hi,
>
> I'm working on the package to upload it to Debian. Is it OK to reopen
> this bug to be automatically closed during upload?
>
> Thanks,
> Alan

Bug#420265: cpufreqd: not work perfectly on battery

[Mattia Dongili]

On Sat, April 21, 2007 1:16 pm, Guillaume De Nayer wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> ok I will try to do this next week...
>
> My kernel isn't the debian linux-image. I have compiled it...I use the
> acpi_cpufreq module instead of SPEEDSTEP_CENTRINO module (which is now
> deprecated)...It could be perhaps come from this fact.
>
> Where I find the cpufreqd log of a failing profile switch ?
> I can check the cpufreq-info reports, but in which case ?
...
>   régulateurs disponibles : conservative, powersave, ondemand,
> performance, userspace

it's not a kernel misconfiguration nor a module loading problem, you have
all the governors available

>   tactique actuelle : la fréquence doit être comprise entre 800 MHz et
> 1.80 GHz.
>   Le régulateur "ondemand" est libre de choisir la vitesse
>   dans cette plage de fréquences.
>   la fréquence actuelle de ce CPU est 800 MHz.
>
> and this when I'm on battery :
...
>   régulateurs disponibles : conservative, powersave, ondemand,
> performance, userspace
>   tactique actuelle : la fréquence doit être comprise entre 1.80 GHz et
> 1.80 GHz.
>   Le régulateur "performance" est libre de choisir la
> vitesse
>   dans cette plage de fréquences.
>   la fréquence actuelle de ce CPU est 1.80 GHz.

doh! this is not good at all...
to get a meaningful cpufreqd log just run it in the foreground and pipe it
through 'tee':
cpufreqd -d -V7 | tee cpufreqd.log

and send me the resulting cpufreqd.log file

thanks
-- 
mattia
:wq!

Bug#356399: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=356399

[Yves-Alexis Perez]

On sam, 2007-04-21 at 13:37 +0200, Catherine Thomas wrote:
> Oh sorry, I moved to Xubuntu, to have xfce and deb packages

I must have miss something. Are you saying that you managed to find a
Debian without xfce packages?
-- 
Yves-Alexis



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420289: ITP: ilf -- InfoNode Look and Feel

[Torsten Werner]

Package: wnpp
Severity: wishlist
Owner: Torsten Werner <[EMAIL PROTECTED]>

* Package name: ilf
  Version : 1.5.0
  Upstream Author : NNL Technology <[EMAIL PROTECTED]>
* URL : http://www.infonode.net/
* License : GPL
  Programming Lang: Java
  Description : InfoNode Look and Feel
 InfoNode Look and Feel is a Java Swing look and feel based on the Metal look
 and feel. It's designed to have a slim, clean appearance. It has support for
 themes.
 .
  Homepage: http://www.infonode.net/



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#256475: xserver-xfree86: [i810] Need to use external program to get a sharp 1400x1050 resolution

[Brice Goglin]

Hi,

The new Intel driver 2.0.0 that entered unstable yesterday is supposed
to make 915resolution useless and get 1400x1050 from scratch, since it
does not use the BIOS tables anymore. Could you try upgrading
xserver-xorg-core and xserver-xorg-video-i810 to unstable?

Brice



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#390691: ITP: gnome-icon-theme-human -- Ubuntu default

[Alan Baghumian]

reopen 390691 [EMAIL PROTECTED]

Alan

> Hi,
>
> Don't worry, please hijack my ITP :-)
>
> Thanks for your work,
>
> Regards, Adam
>
> Le samedi 21 avril 2007 12:27, Alan Baghumian a �crit�:
>> Hi,
>>
>> I'm working on the package to upload it to Debian. Is it OK to reopen
>> this bug to be automatically closed during upload?
>>
>> Thanks,
>> Alan
>




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420291: ITP: openchange -- MAPI (Exchange) implementation for POSIX systems

[Jelmer Vernooij]

Package: wnpp
Severity: wishlist
Owner: Jelmer Vernooij <[EMAIL PROTECTED]>

* Package name: openchange
  Version : 0.0.1
  Upstream Author : Julien Kerihuel <[EMAIL PROTECTED]> et al.
* URL : http://www.openchange.org/
* License : GPL
  Programming Lang: C
  Description : MAPI (Exchange) implementation for POSIX systems

Free Software implementation of the MAPI protocol, as used by Microsoft 
Outlook and Microsoft Exchange. 

The client is getting close to being usable.

Openchange should go into experimental (it is still experimental
itself, and it requires Samba 4, which is currently only in experimental as 
well)

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.18-4-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=locale: Cannot set 
LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash


signature.asc
Description: Digital signature

Bug#420290: xfwm4-themes: Syntax error in in Opta/xfwm4/title-1-inactive.xpm

[Jens Vierbuchen]

Package: xfwm4-themes
Version: 4.4.1-1
Severity: minor


In the last line of /usr/share/themes/Opta/xfwm4/title-1-inactive.xpm,
a closing quotation mark is missing, sometimes leading to a thin black
bar being displayed.

Jens

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (400, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.20.7
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages xfwm4-themes depends on:
ii  xfwm4 4.4.1-1window manager of the Xfce project

xfwm4-themes recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420153: [xml/sgml-pkgs] Bug#420153: docbook2x: line breaks mess up man page file names

[Daniel Leidert]

tags 420153 + pending
thanks

Am Freitag, den 20.04.2007, 15:59 +0200 schrieb Peter Eisentraut:
> Am Freitag, 20. April 2007 15:18 schrieb Daniel Leidert:
> > sources. BTW: 0.8.8-1 failed to work. How did it work for you? It had
> > broken paths in it's binaries, that couldn't be resolved (see #418703).
> > I guess, the problem was introduced between 0.8.3 and 0.8.8. Could you
> > please be so kind to check this?
> 
> You are right, it changed from 0.8.3.
> 
> I also had to add xsltproc to the built dependencies.  This wasn't 
> necessarily 
> earlier either.

Yes. The package build fails, if xsltproc is not available.

FYI: The package is waiting to be uploaded by my sponsor and available
today or tomorrow. Steve Cheng agreed to the proposed solution. So your
example will create a file called MERGE_SET.7 as expected in your OP.

Regards, Daniel



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#414034: xserver-xorg-video-i810-modesetting: dpkg-reconfigure doesn't detect correct video modes

[Brice Goglin]

Hi Herman,

What's the status of this bug now that xserver-xorg-core 1.3 and
xserver-xorg-video-intel 2.0 are in unstable? Correct video modes are
detected but 1280x800 is not chosen by default?

About the suspend/resume problem, it is unrelated (and should not be
discussed here) and might be similar to #390913. The kernel oops is a
kernel problem, possibly related to the suspend2 patch.

Brice



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#390913: xserver-xorg-video-i810: blank screen after suspend

[Brice Goglin]

Hi,

What is the status of this bug now that xserver-xorg-core 1.3 and
xserver-xorg-video-intel 2.0 are in unstable?

Did you guys see Brandon Philips' comment:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=390913;msg=38

Brice



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#380112: xserver-xorg-video-i810: Cross-compiling failed

[Brice Goglin]

Hi,

Does this cross-compiling problem still apply/matter now that
xserver-xorg-video-intel 2.0 entered unstable?

Brice



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#401218: xserver-xorg-video-i810-modesetting: After X is started, switching back to console: console is corrupted

[Brice Goglin]

Hi Tobias,

What is the status of this bug now that xserver-xorg-video-intel 2.0 has
entered unstable? Does you still get a corrupted console?

Thanks,
Brice



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]