I think the answer is using a flexnet DC's aux relay terminal to control the on/off switch terminals of the FX inverter. You'll need a mate3S/SL but that should do it without having to change the inverter...
On Sun, Feb 2, 2025, 8:52 PM Bill Battagin via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > Have any off-gridders done a system with Powerflo16's to power pre-LFP > OB/FX inverters? The FM80's LFP settings in this system are compatible > with LFP but I'm looking for options other than using the Aux in the > CC's wired to a NC relay and from there to the inverter on/off landings > in the green terminal of the OB/FX for the LBCO and reconnect function. > > I've been down this road before, though a different > equipment. I've used the Aux from a Classic for inverter LBCO and > reconnect though its never been fully "tested", although I read "open" > and closed" at the un-wired aux landing when I forced it with a high > LBCO setting. Just thinking about the highest reliability. > > Thanks in advance. > > Bill > > Feather River Solar Electric > Bill Battagin, owner > 4291 Nelson St. (Shipping) > 5575 Genesee Rd > <https://www.google.com/maps/search/5575+Genesee+Rd?entry=gmail&source=g>. > (USPS, UPS) > Taylorsville, CA 95983 > 530-284-7849, 258-1641(cell) > CA. C10 Lic # 874049 > Solar Powered since 1982 > Home of the Sunny Side Up > > > -- > This email has been checked for viruses by Avast antivirus software. > www.avast.com > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
