Have any off-gridders done a system with Powerflo16's to power pre-LFP
OB/FX inverters? The FM80's LFP settings in this system are compatible
with LFP but I'm looking for options other than using the Aux in the
CC's wired to a NC relay and from there to the inverter on/off landings
in the green terminal of the OB/FX for the LBCO and reconnect function.
I've been down this road before, though a different
equipment. I've used the Aux from a Classic for inverter LBCO and
reconnect though its never been fully "tested", although I read "open"
and closed" at the un-wired aux landing when I forced it with a high
LBCO setting. Just thinking about the highest reliability.
Thanks in advance.
Bill
Feather River Solar Electric
Bill Battagin, owner
4291 Nelson St. (Shipping)
5575 Genesee Rd. (USPS, UPS)
Taylorsville, CA 95983
530-284-7849, 258-1641(cell)
CA. C10 Lic # 874049
Solar Powered since 1982
Home of the Sunny Side Up
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
