HI Chris, Can you give us more data?
Like is this a new problem, or it only started after X? Since its not seeing the port ( NA) it could be the CC or the HUB, or the cable. the hub will show an active LED light if its connecting to anything on that port. You can try plugging into the CC directly to see if it reads it, probably easier with another mate. It just sucks to not have tech support or anyone on wrenches from some OEMS Jay > On Jul 19, 2024, at 10:13 AM, Christopher Warfel via RE-wrenches > <re-wrenches@lists.re-wrenches.org> wrote: > > This is grid tied system with all firmware updates that the Mate 3s > recognizes. I cannot figure this blank data menu out. I have to program the > battery ABS, FLOAT settings from the FM60 CC. System is 12 years old so no > Tech support available even if they answer the phone.... > > Has anyone have advice for if this is normal, or if there seems to be an > issue? Used a spare Mate 3s with no difference. Thank you, Chris > > > > > > > > -- > Christopher Warfel > ENTECH Engineering Inc. > PO Box 871, Block Island, RI 02807 > 401-477-5773 > <EEIlogolong.jpg> <https://entech-engineering.com/Home/default.php> > > <Mate3s Battery Setpoint > Menu.jpg><cwarfel.vcf>_______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
