I just sort of hit this  in a previous post:
check 690.47C(3). Your system falls under (C) AC & DC grounding requirements.....
This just shouldn't be that hard with the inspectors....

R. Walters
Solarray.com
NABCEP # 04170442       



On Jun 19, 2009, at 10:55 AM, Peter Parrish wrote:

I have a LA Dept. of B&S inspector cite Article 690.47(B) “Direct- Current Systems” and its consequent grounding requirements (250.166 (A)(B)) in connection with a very straightforward grid tied PV system (i.e. no batteries, just PV and a Xantrex GT inverter).


He said that since there is a DC circuit as well as an AC circuit, 690.47(B) applies. I countered that all PV systems have a DC circuit, so to separately call out a “Direct-Current System” must apply to something other than the DC PV circuit inherent in all PV systems.


Am I missing something here? Is “Direct-Current System” defined in Article 690? We are working off NEC 2008.


Thanks in advance for your help.


-          Peter


<image003.gif>Peter T. Parrish, Ph.D., President
California Solar Engineering, Inc.
820 Cynthia Ave., Los Angeles, CA 90065
CA Lic. 854779, NABCEP Cert. 031806-26
peter.parr...@calsolareng.com
Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885



<image003.gif>
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re- wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org


_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to