I expect the gear will tolerate it ok, probably the gen shutting down unexpectedly is more of a headache than the slight bump in frequency.
Bob On Thu, Nov 20, 2008 at 5:32 PM, jay peltz <[EMAIL PROTECTED]> wrote: > Hi Bob, > Nope standard house, well standard in that is very high end. > > 60" plasma screen, > best of everything all that but nothing that I would call unusual? > > jay > > peltz power > > On Nov 20, 2008, at 2:26 PM, robert ellison wrote: > > Is he running anything unusual? > > Bob > > On Thu, Nov 20, 2008 at 12:15 PM, jay peltz <[EMAIL PROTECTED]> wrote: > >> Hi Bob, >> Thanks for the details. >> >> I'll let you know about how this goes. >> >> Customer was being super careful to have it as close to 60hz as possible. >> >> Hope this doesn't freak him out! >> >> jay >> On Nov 20, 2008, at 8:26 AM, robert ellison wrote: >> >> Seems that i ran it up till the charger was happy and it was not over 62 >> or 63 HZ. Some people on the list would scream but I never had a problem >> doing it and never blew anything up. Set it for 62 or 63 unloaded and see >> where it settles with a full charger load on it. Some will not increase, >> just put it back where it was. >> I always figured that low was worse than high. Not a good idea to crank up >> a Coleman or other cheap generator and unload it fast. I know people that >> have blown capacitors when they do that. >> I have not had to do that with the Magnum inverter / chargers, they seem >> to be happy on less amps ac input Heart Interface (dating myself, remember >> them?), Trace and Outback seemed to like a little frequency increase. >> >> Later, >> Bob. >> >> On Thu, Nov 20, 2008 at 11:10 AM, jay peltz <[EMAIL PROTECTED]> wrote: >> >>> Hi Bob, >>> Do you have any numbers as to what the HZ where or where you think it >>> worked best? >>> >>> thanks, >>> >>> jay >>> >>> peltz power >>> >>> On Nov 20, 2008, at 3:38 AM, robert ellison wrote: >>> >>> Probably due to the load of the charger, try changing the rpm a little >>> (higher) if you can. Might help. I have had stoves that wouldn't light under >>> full charger load. They did better at a somewhat higher rmp (frequency) >>> >>> Bob >>> >>> > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
