Probably due to the load of the charger, try changing the rpm a little (higher) if you can. Might help. I have had stoves that wouldn't light under full charger load. They did better at a somewhat higher rmp (frequency)
Bob On Thu, Nov 20, 2008 at 12:12 AM, jay peltz <[EMAIL PROTECTED]> wrote: > Hi All, > > here is along those same lines a question about line noise. > > > System 15kw diesel generator > > 4 stack outback at 24v 120v/240vac > > 3000 amp hr industrial batteries. > > when genny running, 59.5-60 hz > voltage 122/244 > > > Symptoms. > > when charging there is some buzzing on some electrical equipment in the > house. Stove pizeo won't lite, transformer on furnace runs hot, Fridge > makes more noise. > Seems to get worse at end of charge cycle. > > > Now, with inverter only, no noise, humm, buzz etc. > > With Genny only no buzz, humm, etc. > > > Any advice? > > thanks, > > jay > > peltz power > > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
