Interesting question. I know all inverter manufacturers are regulated to run at 60hz in the US and in the case of Fronius they have less than 5% THD (total harmonic distortion). Are they concerned with issues through the air or power lines? The line should not effect it I imagine especially since where the inverter(s) are mounted would not be in the same room as the equipment. I have heard inverters compared to a washing machine as a comparative EMF producer.
On Wed, Nov 19, 2008 at 12:35 PM, Jerry Caldwell <[EMAIL PROTECTED]>wrote: > Wrenches; > > We're talking to a customer who is a hospital and the question came up; can > inverters interfere with radiology equipment or vice-versa? > > Anyone know the answer to this? Any input is appreciated. > > Jerry Caldwell > Recurrent Energy > > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > -- Jason Lombard CSBA Open Hand Solar LLC. Pecos, NM. 87552 505 795 8646 [EMAIL PROTECTED]
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
