Hi Chris,
Here is the mythbusters video.
http://www.youtube.com/watch?v=JmJoyuUJj2Q
jay
peltz power
On Nov 12, 2008, at 8:00 AM, Chris Meier wrote:
Please do not forget any safety device in HVAC or plumbing is
not designed to cycle open and close as a controller. They are
designed
to fail and in a lot cases they are designed to fail once. After the
T/P
opens it may never really reset which is ok because it will leak but
the
P/T could also loss the calibration which means they can stay closed
even if they should be open. In many cases this means the house is
leveled when the explosion happens.
Chris Meier
Product Manager
UniRac, Inc.
1411 Broadway Blvd. NE
Albuquerque, NM 87102-1545
Ph: 505-242-6411
Fx: 505-242-6412
Email: [EMAIL PROTECTED]
Web: http://www.unirac.com
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
