Thank You everybody. That is some much appreciated information. I think I will end up getting those Paul racers. I wonder if I had two sets of those P-50s and some epoxy if I could play Dr. Frankenstein and create my own DIY P-50 longboards. If I ever do and the results are not tragic or comical I will inform you all.
Thanks again Mike On Saturday, January 5, 2013 5:02:38 PM UTC-5, Mike B wrote: > > Hi y'all > With the tektro brakes you need to leave a bit of space between the > fender and the caliper arm for when the quick release is opened and the arm > swings down. I was curious if this is similar on the paul racer centerpull > or can you get the fender up a little higher? Even a few millimeters? I've > been toying with the idea of getting some Hetres for the 650b Hilsen ( i > have parimotos at the moment ) and want to maximize fender clearance. > Also I like the SKS fenders ( i have the longboards )... does anyone use > P-50s or P-55s with their Hetres to minimize the chance of them rubbing > width wise? Are they better with Hetres than the P-45s? > > Thanks! > > Mike > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To view this discussion on the web visit https://groups.google.com/d/msg/rbw-owners-bunch/-/-rdDDYuG2CUJ. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
