I'm running the 16/19 with 32/36 in front on my QB. This gives me
about the same range as stock (40/32 with a single 18t freewheel) with
a dandy looking fender line, great chainline, a bailout gear AND easy
wheel removal. I only use the 16/36 and 19/32 combos. I live in a
pretty hilly town and I've used my QB on mountain rides with this set
up. If I lived somewhere flat, I'd definitely gear up.

Dave

On Jun 17, 11:02 am, Mojo <gjtra...@yahoo.com> wrote:
> My Q has been in single speed mode, vs fixed gear mode, for more than
> a 
> year.http://www.flickr.com/photos/79695460@N00/2760281945/in/set-721576074...
> I am using the 17-19 Dos Eno and that would work for you, though it
> would be quite low gearing. I am using the 17-19 with a 39-45 up front
> which is not the most efficient use of the DosEno as the small-large
> and large-small are the same gear inches. But it gives me three useful
> gears: 72-63-55 inches. Like other owners, I rarely shift (out of the
> 72 inch gear) and prefer to grunt until absolutely necessary.
>
> On the other (flop) side is a 23T freewheel that gives me a bailout
> gear of 46 inches. I have only used that gear twice for climbs into
> the Colorado National Monument. Both times I swore I would never use
> the Q for that ride again as I hate to flip-flop on the side of the
> road. Its been long enough that I am about ready to do it again....
>
> On Jun 17, 9:59 am, "Rob H." <robhua...@gmail.com> wrote:
>
>
>
> > The 16t/19t White Industries DOS ENO freewheel seems to be sold out on
> > Riv's website so there must be a lot of SimpleOne owners who are now
> > installing these on their wheels. Does anyone know if are able to get
> > all four gear/chainring combinations between the 16/19 and the Sugino
> > 40/32? I'm interested in this setup but only if i can get all four
> > combinaions. Otherwise I think I'll just go "simpler" and have 18t as
> > the main cog and 22t on the flip side of a free/free rear wheel.- Hide 
> > quoted text -
>
> - Show quoted text -

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
To unsubscribe from this group, send email to 
rbw-owners-bunch+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en.

Reply via email to