On Sun, May 24, 2009 at 11:10 PM, Michael Fischer <fische...@t-online.de> wrote: > Hello Xiaofan, > > I have tesed to flash the program here. I could flash it > with my ft2232 device. I do not check the functionality > of the program itself, LED1 was flashing.
In my test, LED 1 is also flashing. The USB virtual com port is also correctly presented as /dev/ttyACM0 but I could not talk to it with gtkterm/cutecom under Linux. If I flash the hex file with lpc21isp, I can talk with the device with gtkterm/cutecom. >>2) And it seems to have reset/halt problem. > This is correct, I could not get in contact with OpenOCD. > And I could not get in contact with the original segger > sw and try to erase the CPU. Here I must use FlashMagic > and the ICSP interface to erase the CPU. > > Is it possible that the application switch of the JTAG > interface here? > I need to check. In my case, I have to reflash it with lpc21isp (put ICSP switches to the ON positions). -- Xiaofan http://mcuee.blogspot.com _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
