On Sun, May 24, 2009 at 4:42 PM, Xiaofan Chen <xiaof...@gmail.com> wrote: > I am using the following simple script and J-Link V3. > I will try yours as well. >
With your script (replace with JLink) it seems to be ok. Thanks. Occasionally there are some timeout though. mc...@ubuntu904:~/Desktop/build/openocd/jlinkv3/flash$ telnet localhost 4444 Trying ::1... Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Open On-Chip Debugger > halt > flash write_image test_rom.hex 0x0 timed out while waiting for target halted lpc2000 prepare sectors returned 151951736 error writing to flash at address 0x00000000 at offset 0x00000000 (-902) called at file "command.c", line 453 called at file "embedded:startup.tcl", line 89 called at file "embedded:startup.tcl", line 91 called at file "embedded:startup.tcl", line 93 > halt > poll target state: halted target halted in ARM state due to debug-request, current mode: Abort cpsr: 0x600000d7 pc: 0x000000e4 > flash write_image test_rom.hex 0x0 wrote 364 byte from file test_rom.hex in 0.330007s (1.077155 kb/s) > dump_image dump.bin 0x0 364 dumped 364 byte in 0.032037s > reset 30 kHz JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (Manufacturer: 0x787, Part: 0xf1f0, Version: 0x4) JTAG Tap/device matched > halt target state: halted target halted in Thumb state due to debug-request, current mode: Supervisor cpsr: 0xa00000f3 pc: 0x7fffd2c2 > step target state: halted target halted in Thumb state due to single-step, current mode: Supervisor cpsr: 0xa00000f3 pc: 0x7fffd2c4 mc...@ubuntu904:~/Desktop/build/openocd/jlinkv3/flash$ openocd -f jlink.cfg Open On-Chip Debugger 0.2.0-in-development (2009-05-24-16:28) svn:1905 BUGS? Read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS $URL: svn://svn.berlios.de/openocd/trunk/src/openocd.c $ 30 kHz Info : J-Link compiled Feb 20 2006 18:20:20 -- Update -- Info : JLink caps 0x3 Info : JLink hw version 30000 Info : Vref = 3.286 TCK = 1 TDI = 0 TDO = 0 TMS = 0 SRST = 1 TRST = 255 Info : J-Link JTAG Interface ready Info : JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (Manufacturer: 0x787, Part: 0xf1f0, Version: 0x4) Info : JTAG Tap/device matched 30 kHz Info : JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (Manufacturer: 0x787, Part: 0xf1f0, Version: 0x4) Info : JTAG Tap/device matched Warn : srst pulls trst - can not reset into halted mode. Issuing halt after reset. target state: halted target halted in ARM state due to debug-request, current mode: System cpsr: 0x8000005f pc: 0x0000085c requesting target halt and executing a soft reset target state: halted target halted in ARM state due to debug-request, current mode: Supervisor cpsr: 0x800000d3 pc: 0x00000000 1500 kHz Info : accepting 'telnet' connection from 0 Error: timed out while waiting for target halted Warn : lpc2000 prepare sectors returned 151951736 Error: error writing to flash at address 0x00000000 at offset 0x00000000 (-902) target state: halted target halted in ARM state due to debug-request, current mode: Abort cpsr: 0x600000d7 pc: 0x000000e4 wrote 364 byte from file test_rom.hex in 0.330007s (1.077155 kb/s) dumped 364 byte in 0.032037s 30 kHz Info : JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (Manufacturer: 0x787, Part: 0xf1f0, Version: 0x4) Info : JTAG Tap/device matched target state: halted target halted in Thumb state due to debug-request, current mode: Supervisor cpsr: 0xa00000f3 pc: 0x7fffd2c2 target state: halted target halted in Thumb state due to single-step, current mode: Supervisor cpsr: 0xa00000f3 pc: 0x7fffd2c4 -- Xiaofan http://mcuee.blogspot.com _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
