[EMAIL PROTECTED] wrote: > > a.) mjpegtools-1.8 does not have the -U option for lavplay, 1.9 does. > > b.) mmap playback with on-board: it is interesting that I also have an on- > board sound card, and I do have problem with mmap, just as Andrea has. > My on-board sound card driver is snd_intel8x0 which is a well established > driver. Could it be that mmap fails because the card is not pci or ISA, > because it is "on-bboard"? Just a thought from a non-C programmer or from > a non-expert of device drivers.
Actually, I have some other problems that I think are all related. I tried to record audio with arecord using the on-board ICH5 sound card, or whatever it is, that thing driven by snd-intel-8x0, the same as Janos, I guess. Well, the good news are that arecord works perfectly after lowering the "Capture" control, which is not Line-in, nor anything that matches a jack on the rear panel: it's just a control named "Capture" by gnome-sound-control and by amixer. Unfortunately, lavrec still records audio terribly. Also, lavplay still issues the usual "mapping" error. BTW, lavrec only works with -U option: without it, it issues the same "mapping" error as lavplay does. Following some advices on debian-user and debian-it (I thought it was a sound-card problem or an alsa problem), I tried to tell lavrec to use a different device instead of dsp, but all my attempts to set LAV_AUDIO_DEV failed. I tried with /dev/audio, /dev/dsp1, /dev/audio1, but without success. I hope this could be useful. Best regards. -- Andrea ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Mjpeg-users mailing list Mjpeg-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mjpeg-users
