On Sat, 2004-09-18 at 10:47, Nick Rout wrote: > My motherboard is about 2-3 years old a Soltek VIA based board > KT133/KM133 according to lspci. I see that VIA present a proble, but I > am not sure if thats the problem in my case. It might very well, also see the motherboard/card table in the FAQ.
> Buz[0]: Initializing i2c bus... > i2c-algo-bit.o: (0) scl=1, sda=1 > i2c-algo-bit.o: (1) scl=0, sda=0 > i2c-algo-bit.o: SCL unexpected low while pulling SDA low! > Buz[0]: find_zr36057() - can't initialize i2c bus Look on google, we've had several of such reports in the past. IIRC, all were on a VIA based system. > 2. What sort of error are those error messages a sign of? Failed signal transmission. Basically, the hardware doesn't do what the driver asks it to do. It usually comes down to incompatibility between hardware, mostly a sign of odd PCI/motherboard stuff. I don't know how to solve it, I only know how to diagnose it... Ronald -- Ronald S. Bultje <[EMAIL PROTECTED]> ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
