Hallo > Hi there, I have an iomega biz card. I am new to this card (which I > bought second hand) but not new linux. When the computer boots you see that the SCSI controller on the Buz is initialized ?
> I am running kernel 2.6.8. I see that there are zr36067 and so on > drivers in that kernel source so I am using them. Thats part of my first > question.... > > My motherboard is about 2-3 years old a Soltek VIA based board > KT133/KM133 according to lspci. I see that VIA present a proble, but I > am not sure if thats the problem in my case. Note: The Buz does not like the older Via chipsets. > When I modprobe zr36067 card=7 debug=2 I get the following on the > console: > > FATAL: Error inserting zr36067 > (/lib/modules/2.6.8-gentoo-r3/kernel/drivers/media/video/zr36067.ko): No > such device > > and this in dmesg: > > Linux video codec intermediate layer: v0.2 > Zoran MJPEG board driver version 0.9.5 > ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 10 (level, low) -> IRQ 10 > MJPEG[0]: Zoran ZR36057 (rev 1) irq: 10, memory: 0xdb001000. > Buz[0]: Initializing i2c bus... > i2c-algo-bit.o: (0) scl=1, sda=1 > i2c-algo-bit.o: (1) scl=0, sda=0 > i2c-algo-bit.o: SCL unexpected low while pulling SDA low! > Buz[0]: find_zr36057() - can't initialize i2c bus > No known MJPEG cards found. > > And I end up with these modules being added: > > saa7185 5896 0 > saa7111 6536 0 > videocodec 8596 0 > > (videodev is already there as a result of my bttv card) > > Now if this is because of the VIA board I'll give up now, but it looks > to me like I may need to make a device in /dev, but I am not sure. > > So 2 questions really: > > 1. Am I better to download the latest driver from your efforts, or is > the kernel 2.6.8 up to date anyway? The 2.6.8 is quite up to date. You might try the CVS version. But I fear that this wont solve the problem. > 2. What sort of error are those error messages a sign of? Are you able to load modules like i2c_core, i2c_albo_bit, videodev, videocodec ? With insmod by hand ? When that works without any obvious error, try loading the buz modules: saa7111, saa7185, zr36060, and than the zoran driver. auf hoffentlich bald, Berni the Chaos of Woodquarter Email: [EMAIL PROTECTED] www: http://www.lysator.liu.se/~gz/bernhard ------------------------------------------------------- This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 Project Admins to receive an Apple iPod Mini FREE for your judgement on who ports your project to Linux PPC the best. Sponsored by IBM. Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
