Grant Likely wrote:
Paul, my git server is down at the moment. Can you please pick this one up for .25? It is needed to boot the tqm5200 board.
Could we also have similar fixes for cm5200.dts and motionpro.dts picked up? I could provide the patches within a day -- will this be OK? Regards, Bartlomiej
Acked-by: Grant Likely <[EMAIL PROTECTED]> Cheers, g. On Thu, Mar 20, 2008 at 9:24 AM, Anatolij Gustschin <[EMAIL PROTECTED]> wrote:Hello Wolfgang, Wolfgang Grandegger wrote: > I just tried Linux 2.6.25-rc6 on my TQM5200 module and got the attached > oops. Are there any known patches fixing the problems? try the patch below for tqm5200.dts, rebuild dtb and boot again. Not sure if it works for Linux 2.6.25-rc6, but for 2.6.25-rc3 it does. Anatolij -- diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts index c86464f..7c23bb3 100644 --- a/arch/powerpc/boot/dts/tqm5200.dts +++ b/arch/powerpc/boot/dts/tqm5200.dts @@ -83,6 +83,7 @@ }; [EMAIL PROTECTED] { + device_type = "dma-controller"; compatible = "fsl,mpc5200-bestcomm"; reg = <1200 80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 @@ -127,10 +128,25 @@ [EMAIL PROTECTED] { device_type = "network"; compatible = "fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <3000 400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + [EMAIL PROTECTED] { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0:[EMAIL PROTECTED] { + device_type = "ethernet-phy"; + reg = <0>; + }; }; [EMAIL PROTECTED] {
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
