On Wed, Mar 26, 2008 at 1:45 PM, Bartlomiej Sieka <[EMAIL PROTECTED]> wrote:
> The bulk of this patch is taken from
> http://patchwork.ozlabs.org/linuxppc/patch?q=Balakowicz&id=16197, with few
> other updates.
>
> Signed-off-by: Marian Balakowicz <[EMAIL PROTECTED]>
> ---
> Addressed comments from the list; would appreciate picking up as the patch
> fixes booting issue on TQM5200 and Motion-PRO (cm5200 changes are analogous,
> but not tested due to hardware unavailability).
I see one obvious error; but other than that it looks good. Once that
is fixed I can recommend for Paul to pick it up for .25. It's just
dts changes, so I don't expect it to be a problem.
Cheers,
g.
> diff --git a/arch/powerpc/boot/dts/motionpro.dts
> b/arch/powerpc/boot/dts/motionpro.dts
> index 76951ab..f27256b 100644
> --- a/arch/powerpc/boot/dts/motionpro.dts
> +++ b/arch/powerpc/boot/dts/motionpro.dts
> @@ -209,10 +208,25 @@
> + [EMAIL PROTECTED] {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> + reg = <3000 400>; // fec range, since we need
> to setup fec interrupts
> + interrupts = <2 5 0>; // these are for "mii
> command finished", not link changes & co.
> + interrupt-parent = <&mpc5200_pic>;
> +
> + phy0:[EMAIL PROTECTED] {
> + device_type = "ethernet-phy";
> + reg = <2>;
This doesn't look right. Reg should match the value in "[EMAIL PROTECTED]"
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
