On 15.5.2016 15:47, John Crispin wrote:
does USB also work for you ?
USB seems to work ok.
I attached an USB memory stick and it gets recognised normally.
Log items look rather normal to me.
root@lede:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 5120 5120 0 100% /rom
tmpfs 62720 1524 61196 2% /tmp
/dev/mtdblock5 9472 452 9020 5% /overlay
overlayfs:/overlay 9472 452 9020 5% /
tmpfs 512 0 512 0% /dev
/dev/sda1 3940288 86652 3853636 2% /mnt/sda1
root@lede:~# ls -l /mnt/sda1/
-rwxrwxrwx 1 root root 7741 Nov 7 2015 HNsettings.071115.cpt
-rwxrwxrwx 1 root root 7722 Mar 15 19:04 HNsettings.150316.cpt
-rwxrwxrwx 1 root root 7736 Dec 28 16:10 HNsettings.281215.cpt
-rwxrwxrwx 1 root root 220 May 5 2015 applyHNsettings.sh
-rwxrwxrwx 1 root root 366 Jan 23 2014 checkUciSettings.sh
...
Sun May 15 15:49:59 2016 kern.info kernel: [ 1867.441605] usb 1-1: new
high-speed USB device number 2 using ehci-platform
Sun May 15 15:49:59 2016 kern.info kernel: [ 1867.596679] usb-storage
1-1:1.0: USB Mass Storage device detected
Sun May 15 15:49:59 2016 kern.info kernel: [ 1867.617290] scsi host0:
usb-storage 1-1:1.0
Sun May 15 15:50:00 2016 kern.notice kernel: [ 1868.622872] scsi 0:0:0:0:
Direct-Access Pretec UltimateGuard 2.00 PQ: 0 ANSI: 2
Sun May 15 15:50:00 2016 kern.notice kernel: [ 1868.633976] sd 0:0:0:0: [sda]
7897088 512-byte logical blocks: (4.04 GB/3.77 GiB)
Sun May 15 15:50:00 2016 kern.notice kernel: [ 1868.642676] sd 0:0:0:0: [sda]
Write Protect is off
Sun May 15 15:50:00 2016 kern.debug kernel: [ 1868.647477] sd 0:0:0:0: [sda]
Mode Sense: 00 00 00 00
Sun May 15 15:50:00 2016 kern.err kernel: [ 1868.648290] sd 0:0:0:0: [sda]
Asking for cache data failed
Sun May 15 15:50:00 2016 kern.err kernel: [ 1868.653863] sd 0:0:0:0: [sda]
Assuming drive cache: write through
Sun May 15 15:50:00 2016 kern.info kernel: [ 1868.832561] sda: sda1
Sun May 15 15:50:00 2016 kern.notice kernel: [ 1869.008513] sd 0:0:0:0: [sda]
Attached SCSI removable disk
Sun May 15 15:50:00 2016 kern.warn kernel: [ 1869.063643] FAT-fs (sda1):
Volume was not properly unmounted. Some data may be corrupt. Plea
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
