On 2016-05-14 21:32, Hannu Nyman wrote: > On 14.5.2016 21:33, Felix Fietkau wrote: >> On 2016-05-14 12:56, Hannu Nyman wrote: >>> Sorry but no beef. I still end up in a reboot loop with my WNDR3800. >>> I applied your two 4.4. patches manually to my sources. >>> >>> As far as I could see from the LEDs, the router reboots before the failsafe >>> entrance point is reached. Behaviour looks similar as before your patches. >>> (I >>> have been compiling and trying 4.4 monthly ever since nbd introduced 4.4 >>> support for ar71xx initially and so far every attempt has been a reboot >>> loop.) >> Please try the updated version from my staging tree, it should work now: >> http://git.lede-project.org/lede/nbd/staging.git >> >> Thanks, >> >> - Felix > > Thanks, Felix. > Your patch fixed booting for me. I applied your commit > 60069b2270882d70069a2da3664e87791f9b76c3 on top of John's two patches, as > they did not seem to conflict. The router booted ok after the flash. > > (note that in patch 620-... Felix hardcoded the value 3 instead of using > QCA953X_DDR_REG_FLUSH_PCIE (and _WMAC), while John fixed those symbols' > values in his changes to the patch 620-... and in the new patch 480-... ) > > However, a negative symptom is that the radios are disabled. I did not apply > your new mac80211 patch, so that might be a reason. "wifi detect" produces no > output. I haven't tried to debug that any further, but just wanted to tell > that the WNDR3800 router finally boots with kernel 4.4, so the changes from > Felix are to the right direction. Please use the commits from my staging tree as-is and skip John's patches.
- Felix _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
