Charles: Thanks. Anyone have any ideas on how to get Caller-ID over the T1? Is it even possible?
Thanks, Neil At 10:35 AM -0500 1/18/05, Charles Patterson wrote: >That's where some of the other guys might know better. T1 has some kinds of >signalling going along with it, but I don't know if it is actually caller id >or how it works. What they call PRI is like T1 but one of the channels is >totally dedicated to passing data so I know PRI offers caller id type stuff, >unfortunately, PRI doesn't work with the T1 card, it needs different >hardware. > >charles > > >----- Original Message ----- >From: "Neil Ticktin" <[EMAIL PROTECTED]> >To: "Charles Patterson" <[EMAIL PROTECTED]> >Sent: Tuesday, January 18, 2005 9:05 AM >Subject: Re: KX-T: 1232-7, T1 Card, and Built-in CallerID > > >> Charles, >> >> Thanks for the answer. >> >> Bummer. So what does it take to get CallerID over the T1? Or is that >> even >> possible? >> >> Thanks, >> Neil >> >> >> At 8:32 AM -0500 1/18/05, Charles Patterson wrote: >>>Hi Neil, >>> >>>basically, the caller id in the -7 only means that they installed a cid >>>card >>>onto the first 4 co lines. That cid card only works on the co lines and >>>will >>>do nothing for T1 channels. Caller ID on a regular phone line is actually >>>a >>>1200 baud modem analog signal. That has no relationship to the T1 >>>multiplexed data. >>> >>>Charles >>> >>> >>>>>Due to a hardware failure on my 1232-5, I had to upgrade to a 1232-7 >>>>>today. >>>>>One of the features I understand that it has is built-in callerid for 4 >>>>>lines. I have a T1 plugged into this KSU via a KX-TD187 T-1 Card. >>>>> >>>>>Has anyone figured out if it's possible to get the first four lines off >>>>>the >>>>>T1 work with the built-in callerid of the 1232-7? >>>>> >>>>>Thanks, >>>>>Neil _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
