I get caller id name and number on my PRI - TD200. The CLEC has a 5ESS switch. We also have customers on Sprint with Northern equipment and all is fine. The problem with ours in the past with number only was the software in the 200. Once upgraded, all is fine.
Michael Karaman President The Phone Network, Inc. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bill Wiggins Sent: Thursday, December 30, 2004 9:48 AM To: larry; kxt@kxthelp.com Subject: Re: KX-T: 1232-7, T1 Card, and Built-in CallerID the PRI card supports caller id but you just get the number not the name. Called Panasonic ..it's a switch issue ----- Original Message ----- From: "larry" <[EMAIL PROTECTED]> To: <kxt@kxthelp.com> Sent: Wednesday, December 29, 2004 10:45 PM Subject: Re: KX-T: 1232-7, T1 Card, and Built-in CallerID > The 8 built-in CO's are useable with th T-1 card installed. > > BUT! The original T-1 card does not support TR-0008, which is how > most phone companies deliver name and number > info (caller-id) over a T-1. > > If you use a REAL T-1 device (like a Adtran channel bank), it > understands TR08 and will put the CID tones on the > broken-out (pots) lines, which the pano box co 1 thru 8 will present > to the sets. I guess you could use a > drop/insert box on the incoming T-1 to pull out line 1-4 to send to a channel bank that then goes to co 1-4, and > pass the rest of the T-1 to the T-1 card. (not worth it) > > Now if you are using the PRI card, disregard the above. We never had > the courage to try the PRI card ;-) > > Does anyone know if the d500 supports a T-1? and TR-0008? Last I > heard, Pano dumped T-1 and is only pushing PRI > and voip. > > happy new year all, > > -larry > > > > > 12/29/04 10:21:37 AM, Neil Ticktin <[EMAIL PROTECTED]> wrote: > > >Hello all, > > > >Due to a hardware failure on my 1232-5, I had to upgrade to a 1232-7 today. > >One of the features I understand that it has is built-in callerid for > >4 lines. I have a T1 plugged into this KSU via a KX-TD187 T-1 Card. > > > >Has anyone figured out if it's possible to get the first four lines > >off the > >T1 work with the built-in callerid of the 1232-7? > > > >Thanks, > >Neil > > > >_________________________________________________________________ > >KX-T Mailing list --- http://kxthelp.com/ > >Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > > > > > > > > > > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
