The 8 built-in CO's are useable with th T-1 card installed. BUT! The original T-1 card does not support TR-0008, which is how most phone companies deliver name and number info (caller-id) over a T-1.
If you use a REAL T-1 device (like a Adtran channel bank), it understands TR08 and will put the CID tones on the broken-out (pots) lines, which the pano box co 1 thru 8 will present to the sets. I guess you could use a drop/insert box on the incoming T-1 to pull out line 1-4 to send to a channel bank that then goes to co 1-4, and pass the rest of the T-1 to the T-1 card. (not worth it) Now if you are using the PRI card, disregard the above. We never had the courage to try the PRI card ;-) Does anyone know if the d500 supports a T-1? and TR-0008? Last I heard, Pano dumped T-1 and is only pushing PRI and voip. happy new year all, -larry 12/29/04 10:21:37 AM, Neil Ticktin <[EMAIL PROTECTED]> wrote: >Hello all, > >Due to a hardware failure on my 1232-5, I had to upgrade to a 1232-7 today. >One of the features I understand that it has is built-in callerid for 4 >lines. I have a T1 plugged into this KSU via a KX-TD187 T-1 Card. > >Has anyone figured out if it's possible to get the first four lines off the >T1 work with the built-in callerid of the 1232-7? > >Thanks, >Neil > >_________________________________________________________________ >KX-T Mailing list --- http://kxthelp.com/ >Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > > > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
