Well, no one has answered this yet, so I will throw in a few tidbits.
The KX-TD193 CID card included with the KX-TD-1232-7 receives CID (CPID) on CO (i.e. POTS) lines 1-4. You may add another card to receive CID data on lines 5-8. If you have the 4-CO line card installed (not possible with T1, ISDN-BRI, or ISDN-PRI card), you can install a card to receive CID on lines 9-12.
AFAIK, the KX-TD1232 does not directly support receiving CID information on a T1 line, unless there is ISDN-PRI service running on the T1 (which uses a different card). Even then, KX-TD1232 does not support ISDN-PRI very well -- it only supports National NI-1, and does not yet support National NI-2 (CID number & name).
For more information, You could search the archives for T1, ISDN-PRI etc.
Now that the KX-TDA series is being sold for larger installations, one wonders if Panasonic will continue improving ISDN-PRI or ISDN-BRI for the KX-TD series.
Paul H. Gusciora San Rafael, CA
----- Original Message ----- Date: Wed, 29 Dec 2004 08:19:06 -0800 To: kxt@kxthelp.com From: Neil Ticktin <[EMAIL PROTECTED]> Subject: KX-T: 1232-7, T1 Card, and Built-in CallerID Sender: [EMAIL PROTECTED]
Hello all,
Due to a hardware failure on my 1232-5, I had to upgrade to a 1232-7 today. One of the features I understand that it has is built-in callerid for 4 lines. I have a T1 plugged into this KSU via a KX-TD187 T-1 Card.
Has anyone figured out if it's possible to get the first four lines off the T1 work with the built-in callerid of the 1232-7?
Thanks, Neil
_________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
