Stein Air has everything you need for electrical - wire, connectors, components, tools, etc.
Adam On Tue, Nov 12, 2024 at 11:43 AM Dean Choitz via KRnet <krnet@list.krnet.org> wrote: > can anyone tell me what kind of crimp on wire ends that have the wrap > around ends that crimp to the wire and to the insulation surrounding the > wire and where they can be purchased thank you > > On Saturday, November 9, 2024 at 05:12:27 PM CST, Larry Flesner via KRnet < > krnet@list.krnet.org> wrote: > > > > On 11/9/2024 4:08 PM, David Henderson via KRnet wrote: > > there are no numbers published on the negative side, which leads me to > > question the legitimacy of the 9+ for the KR-1 and 7+ for the KR-2 on > > the positive side. Does anyone have any information about this? Thank > you! > > > > Dave H. > > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > My set of plans went with the KR when it was sold but I recall the plans > stated +/-7 G at 800 pounds. I'm assuming that was the "design" > limits. In my 34 years in the KR community I'm not aware of any reason > to discount that claim. In my "non-engineering" understanding of the > design I'm not sure why it would be weaker in one direction than the > other. The spar caps top and bottom are the same dimension in the main > wings and horizontal stabilizer and the wing attach fittings are the > same top and bottom. > > Someone with current plans might post the exact claim made in the plans. > > Larry Flesner > > 211LF > > > -- > KRnet mailing list > KRnet@list.krnet.org > https://list.krnet.org/mailman/listinfo/krnet > -- > KRnet mailing list > KRnet@list.krnet.org > https://list.krnet.org/mailman/listinfo/krnet >
-- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet
