Larry , I have never " tapped them in ". I put a nut on a longer screw, followed by a steel washer. Then screw the bolt in to the Keensert, thread it into the newly threaded hole, then while holding the bolt from turning, run the nut and washer down to the tanks' aluminum plate. The Keensert will screw into your new threaded hole, pretty much by hand. No special taps, etc are needed, as in a helicoil.
_______________________________________________ Search the KRnet Archives at see Links: ------ [1] https://www.mail-archive.com/krnet@list.krnet.org/. https://www.mail-archive.com/krnet@list.krnet.org/. /> Please see LIST RULES and KRnet info at </br<></a><a href= [2] http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
