Larry , Check out a Keensert. Once inserted , they have two small
locking pins. They make them in different sizes. I mostly use one for
a #10 screw with 32 tpi. The stripped hole is drilled and tapped for
1/4 inch, screw Keensert in, and set the lock pins. They sell a tool
for pushing the pins in, but I just use a nut and washer to push them
in, while holding a long screw from turning. All will be flush with
your plate. John Shaffer N455JS Fremont Ohio
-----------------------------------------From: "Flesner via KRnet"
To: krnet@list.krnet.org
Cc: "Flesner"
Sent: Monday October 26 2020 8:52:24PM
Subject: Re: KR> Riv-nuts / poly-nuts
On 10/26/2020 7:34 PM, Jeff Scott via KRnet wrote:
> You'll only get a couple of threads in it, but that's all you had
before.
What are my other options besides helicoil and rivnut / poly-nut?
Larry Flesner
_______________________________________________
Search the KRnet Archives at see
Links:
------
[1] https://www.mail-archive.com/krnet@list.krnet.org/.
https://www.mail-archive.com/krnet@list.krnet.org/.
/> Please see LIST RULES and KRnet info at </br<></a><a href=
[2] http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
